Perth and Kinross · Scotland
Pitlochry Gutter Sealing
Gutter and fascia joints in Pitlochry need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Fascia boards with gaps between them
- End caps that drip every time it rains
- Drips from gutter joints and end caps
Looking after it afterwards
To keep the joints looking good and working properly:
- Make sure downpipes aren’t blocked
- Check the gutters during heavy rain
- Get leaks sealed before the wet months
- Watch the wall under the gutters for staining
While checking gutters, glance at the fascia joints too. Splits are easier to seal early.
A leaking garage frame lets water reach stored items. Resealing the frame is a quick job while the frame is sound.
How we handle gutter sealing in Pitlochry
A lot of gutter leaks come down to one tired joint. We clean out the joint, dry it and reseal it using a gutter sealant. If the gutter itself has failed, we say so. If you have trim joints where the sealant has failed and internal damp traced to a gutter joint, we can put it right.
Outside joints can only be sealed when they’re dry, so work in Pitlochry depends on the weather, and longer journeys are planned in advance. Tell us how to reach each wall, gutter and roofline.
Big or small, it’s backed by our one-year guarantee in Pitlochry and across Perth and Kinross.
- Where
- Pitlochry (PH16)
- Wider area
- Perth and Kinross
- Cover
- A year, on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Landlords, agents and businesses in Pitlochry
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
Why deal with it now?
Replacing fascias because of open joints is generally unnecessary. A neat seal closes the gaps if the boards are sound. Out of town in Scotland, exposed walls take a lot of weather, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs. Ask us for a quote and we will go through it with you.
Why Pitlochry customers choose us
- Approved under the ARBOMaster scheme
- Tidy, careful work
- We agree the colour with you first
- 12-month guarantee on every job
Take a look at how sealant jobs are priced or our reviews.
Pitlochry buildings and the weather
Under the Repairing Standard, private landlords in Scotland have to keep homes wind and watertight, and failed outside joints work against that. Harled (roughcast) walls are common in Scotland, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface.
For an older house near a landmark such as Pitlochry Church of Scotland, older walls, gutters and the joints where extensions meet them need a flexible sealant.
Pitlochry is about 17 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. From the centre of Pitlochry to the outskirts, gutter sealing is available for homes and businesses alike. Pitlochry is one of 107 places in Perth and Kinross we cover. There’s also a page for Dundee, about 33 miles away.
Our applicators cover all of the PH16 postcode area for gutter sealing and the streets around it. You will find streets such as Church Road, Station Road and Well Brae. Main roads around Pitlochry include the A924, so getting to you is simple. Nearby, we also carry out gutter sealing in Port na Craig (1 mile south), Moulin (1 mile north), Grandtully (4 miles south-west), Ballinluig (4 miles south-east) and Little Ballinluig (4 miles south-west). Pitlochry is among the bigger towns we cover in Perth and Kinross.
What’s near Pitlochry
Around Pitlochry, our work takes us to homes and buildings near Faskally Forest and The Old Mill Inn, among other places. There’s a railway station in Pitlochry itself: Pitlochry station. Other landmarks nearby include Pitlochry Community Hospital (less than half a mile south-west) and Atholl Palace Museum (within half a mile south-east). Green spaces nearby include Loch na Bà.
What happens on the day
Good joint work is mostly preparation, and we don’t rush it. Joints are cleaned back and dried before anything new goes in. In total, it generally takes an hour or two for a few joints, longer for a full run. Outdoor work around Pitlochry depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Work indoors isn’t affected.
- First we trace the drip and check the gutter is not damaged.
- The old sealant and dirt are cleaned out of the joint.
- The joint is dried before sealing.
- A gutter sealant is applied to the joint.
- The gutter is checked and debris around the joints cleared.
How to prepare
- Tell us about access, such as stairs, a lift or high-level joints
- For indoor joints, keep the area dry beforehand if you can
- Keep pets and children clear of the area while we work
Ask for a quote
Every job is quoted individually, so start by telling us what you need. Just email us at info@mrmastic.co.uk with the details, and photos are welcome.
Read more
Towns and villages near Pitlochry
Also in Pitlochry
Pitlochry questions
Do you cover smaller places like Pitlochry?
Yes, we do. Our work covers the whole of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Do you work for landlords with property near Pitlochry station?
Yes, rental work is part of what we do. Just email us at info@mrmastic.co.uk and tell us about the property, and we’ll send you a clear quote.
Is sealing fascia joints something you do?
Yes, it’s a common job. The gaps are cleaned and sealed neatly with a suitable exterior sealant.
Will there be a smell?
Some sealants have a smell while they cure. Ventilation helps.
Can new sealant go over the old?
No, it will not last. It can look neat for a few weeks, but the new bead soon lifts. Removing the old sealant completely is the only lasting way.
Where do you work from?
We are a Crawley-based firm. Our area covers South East England, London and Scotland.
Will it make a mess?
We keep the work tidy. Nearby surfaces are protected, and the area is left clean when we finish.
Will the old sealant be removed?
Yes, every time. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.
Do you need gutter sealing in Pitlochry?
Sealant laid on a wet or dirty joint fails early. Some quick repairs peel off within a season or two for this reason.
Most people get in touch when they notice something like this:
- Water running down the wall below the gutter
- Failed sealant on a garage door frame
- Dripping gutter ends
- Old gutter sealant that has let go
Rented homes near Pitlochry station change hands often, and a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.
What to look for in a quote
- When the joint can take water or movement
- What preparation is included
- Whether VAT is included
- Whether they seal over old material or remove it
What the job involves on each surface
Garage door frames
Failed sealant around a garage door frame lets water in. It’s removed and renewed.
Soffit joints
Soffits sit under the eaves, where joints can open up. We seal them to close the gaps.
What affects the quote in Pitlochry
There’s no set price list, because no two jobs are the same. The quote depends on:
- The number of rooms or windows
- The product the joint needs
- Whether there’s mould to deal with
- How much old sealant there is and how hard it is to remove
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
What we need to know
When you call or email, it’s useful to know:
- Any access issues, like height or stairs
- Photos by email, if that is easy
- Roughly how big the job is
- Any previous sealing or DIY work
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email photos if that’s easy.