Perth and Kinross · Scotland
Moulin Gutter Sealing
Gutter sealing for Moulin and the surrounding area: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Earlier gutter repairs that have peeled off
- Internal damp traced to a gutter joint
- Streaks down the brickwork from a leaking joint
When something else is needed
We will always be straight with you, so here’s what sealant cannot fix:
- Water backing up from a blocked pipe
- Leaks from the roof rather than a joint
- Rotten or damaged fascia boards
If in doubt, drop us a line at info@mrmastic.co.uk and we’ll say what we think before booking.
Surfaces we seal
- Gutter joints
- Soffit joints
- Roofline trims
- uPVC fascias
- Gutter end caps
- Garage door frames
Gutter sealing in Moulin, done properly
Across Moulin, we reseal gutter joints, end caps and roofline trims. Low-level work is straightforward and if it’s higher up, let us know and we will confirm what access is needed. We work on garage door frames, roofline trims and uPVC fascias, and people most often call us about cracked sealant along roofline trims and water running down the wall below the gutter.
Across smaller places in Scotland, stone and harled cottages, farm buildings and newer houses often stand exposed to wind and rain. Gutter joints and wall joints take a battering.
We stand behind the work with a 12-month guarantee, so you’re not left on your own once the job is done.
- Place
- Moulin (PH16)
- Wider area
- Perth and Kinross
- Guarantee
- One year on every job
- Price
- A clear price before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Moulin: your questions answered
Is Moulin in your area for gutter sealing?
Yes, Moulin is within the area we cover. We work across all of Scotland. Just drop us a line at info@mrmastic.co.uk with a few details of the job.
Do you work for landlords with property near Pitlochry station?
Yes. We work for letting agents and landlords as well as homeowners, and several properties can be quoted together. You can email us at info@mrmastic.co.uk with the details for a clear quote.
Is it messy?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
What about gutters on a second or third storey?
Low-level work is easiest. For anything higher, we will confirm what access is needed once we know more.
What guarantee comes with the job?
You get our 12-month guarantee on every job.
Can a leaking gutter joint be sealed?
In many cases, yes. Cleaning, drying and resealing the joint normally works. A split or warped section needs replacing.
Are you ARBOMaster approved?
Yes. Mr Mastic is an ARBOMaster approved applicator, and we are fully insured.
Do you remove the old sealant?
Yes. All of the old material is cut out and the joint cleaned before resealing.
Nearby places to Moulin
What else we do in Moulin
Should I try it myself first?
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
What the job involves on each surface
Soffit joints
Gaps at soffit joints can let in draughts and insects. A neat seal closes them.
Gutter end caps
A leaking end cap sends water straight down the wall. It’s a quick reseal.
What affects the cost of gutter sealing
Some jobs are bigger than they look, and some smaller. The main factors:
- Working hours on commercial sites
- How many areas need sealing
- Mould in or behind the old joints
- Whether the work is at height
Doing several joints on one visit generally makes better use of the time than several visits. We will send you a clear quote for the lot.
What we need to know
To help us quote quickly, please include:
- The type of property
- The rough size of the job
- If someone has resealed it before
- Access, such as stairs, a lift or height
Need a quote? Please drop us a line at info@mrmastic.co.uk and tell us about the job. We will explain what we’d do and send you a clear quote before we start.
Landlord and commercial work in Moulin
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Walls and rooflines in Moulin
Plenty of Scottish homes have harled walls, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface. Under the Repairing Standard, private landlords in Scotland have to keep homes wind and watertight, and sound outside sealant is part of that.
For landlords with property near Pitlochry station, a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside. Homes close to Moulin Church include some older properties, and the joints between older walls, newer extensions and the roofline need a sealant that can move.
Moulin is about 17 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Across the PH16 area, we can carry out gutter sealing at your property. Across Perth and Kinross, we cover 107 places, and Moulin is one of them. You can also see our page for Dundee, roughly 33 miles from Moulin.
Our applicators cover all of PH16 for gutter sealing and the streets around it. You will find streets such as Manse Road, Duff Avenue and Baledmund Road. If you’re just outside Moulin, we cover Pitlochry (1 mile south), Port na Craig (1 mile south), Grandtully (4 miles south-west), Ballinluig (4 miles south-east) and Little Ballinluig (5 miles south-west).
Local landmarks in Moulin
Around Moulin, our work takes us to homes and buildings near Faskally Forest and The Old Mill Inn, among other places. Moulin’s nearest station is Pitlochry station, about 0.8 miles south-west. A little further out are Pitlochry Community Hospital (0.9 miles south-west) and Black Castle of Moulin (under half a mile south-east). Open spaces near Moulin include Loch Broom.
How to look after the new joints
How long the joints last depends on use and care. Here’s what we suggest:
- Have sagging gutters refixed early
- Check the gutters during heavy rain
- Look for streaks or damp on the wall below gutters
- Do not lean ladders against the gutter itself
Give the sealant the cure time we tell you before poking or cleaning near it.
Leaking gutter joints get worse over time. The same spot gets soaked every time it rains and that can cause damp inside.
How it works
On the day, there’s very little for you to do. Show us the job and we will take it from there. The job generally takes anything from an hour or two to a few hours from start to finish. Around Moulin, distance and access matter more than parking. Let us know how to find you and how to reach the joints, and the visit is planned around that.
- First, we find the drip and check the gutter is not cracked or sagging.
- We clean out the joint and take out the old sealant.
- The joint is dried, because sealant will not bond to a wet surface.
- An exterior or gutter sealant is applied to the joint.
- We look along the gutter and clear debris around the joints.
Before we arrive
- Let us know about parking restrictions
- Let us know about stairs, lifts or work at height
- For indoor joints, keep the area dry beforehand if you can
How to get a quote
For a quote, send an email to info@mrmastic.co.uk with the location and a short description of the problem. You’ll have a clear quote before we start.