Perth and Kinross · Scotland
Floor Joint Sealing in Moulin
Floor joints in Moulin need attention? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.
- Failed joint filler in concrete floors
- Threshold joints that have opened or worn
- Skirting that has pulled away from the floor
Different surfaces, different methods
Wet room and bathroom floors
Wet room floors rely on sound joints at the walls. We reseal it with a flexible silicone suited to wet areas and we will say if the problem looks like more than the joint.
Concrete floor joints
Concrete floors have sawn or formed joints to control cracking. They’re resealed with a product chosen for what runs over them.
About our floor joint sealing in Moulin
In kitchens and bathrooms, the joint where the floor meets a bath panel, plinth or skirting takes mop water every day. A flexible silicone seal keeps it out so water and dirt can’t get in. Common call-outs are for skirting caulk that keeps splitting and open gaps along the bottom of skirting boards, across thresholds, commercial floors and wet room & bathroom floors.
Many newer homes in Scotland are timber-framed and settle as they dry out, so skirting and floor joints can open up. Older stone-built homes, meanwhile, often have timber floors that move with the seasons.
The work is covered for a year after we finish. If there’s a problem with it, please drop us a line at info@mrmastic.co.uk.
- Location
- Moulin (PH16)
- Wider area
- Perth and Kinross
- Guarantee
- 12 months on all our work
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Your questions about floor joint sealing in Moulin
Can you do floor joint sealing in Moulin?
Yes. Our work covers the whole of Scotland, and Moulin is part of that. Just email us at info@mrmastic.co.uk with a few details of the job.
Will you come out to Moulin?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
What do you put in the joint?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference, and we’ll tell you what we are using.
When can I walk on the floor?
Follow the cure time we give you. Feet are usually fine first, then mopping, then heavy wheels, depending on the product.
Do you guarantee your work?
Yes, always. Each job is guaranteed for twelve months.
Will there be a smell?
There can be a smell while the sealant cures, but it fades. Opening a window helps.
Do I need to be at home?
If the work is inside, we need someone to let us in. Once we’ve agreed the job, you do not need to watch us work.
Will I be able to paint over the new joint?
For painted skirting, we use a flexible product that can be painted. Silicone will not take paint, so we use it where the joint stays unpainted.
The process
Good joint work is mostly preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours for most rooms, longer for large commercial floors. Somewhere like Moulin may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We start by checking the floor, the joint and what traffic it takes.
- We remove what’s in the joint now.
- We vacuum out the joint and add backing where the depth needs setting.
- The chosen sealant goes in, coloured to suit the floor.
- We tool it neatly and tell you when it can be walked on and cleaned.
Preparing for the visit
- Keep children and pets away from the work area
- Clear the area around the work
- Where the joints are inside, avoid wetting them before we arrive
How to get a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is. Whenever you’re ready, send an email to info@mrmastic.co.uk.
Advice
Common problems we fix in Moulin
Grout is rigid, so a tiled floor with nowhere to move cracks along a grout line. Cracks often run straight along a line of joints, showing where a movement joint was needed.
Common reasons people contact us include:
- Caulk that has cracked where the floor moves
- Gaps between floors and kitchen plinths
- Concrete floor joints that have broken down
- Tiled floors with no room to move
Rented homes near Pitlochry station change hands often, and a tidy floor and skirting joint helps a rental look ready for the next tenant.
Before you book anyone
- Which colour the sealant will be
- Who turns up on the day
- Is VAT in the price?
- What preparation is included
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Use a well-wrung mop rather than flooding the floor
- Vacuum floor joints regularly to stop grit building up
- Check skirting joints after the heating season
- Have a cracking tiled floor checked before tiles break
In commercial units, keep pallet trucks and heavy wheels off new joints until they’ve cured. Mark the area off so drivers avoid it while it cures.
In wet areas, an open floor joint lets water reach the subfloor. A sound seal stops that happening.
Leave it or put it right?
Filling a skirting gap with caulk looks fine at first, so the gap reappears. A flexible sealant stretches instead, so the joint stays closed. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water through a failed joint keeps working away until it’s fixed.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Ask us for a quote and we’ll explain what it covers.
Why us?
- Full insurance on every job
- Anti-fungal silicone where joints get wet
- More than 20 years in sealant work
- Sealant colour chosen to suit
Take a look at our cost guide and what customers say.
Floor joint sealing in Moulin: local notes
Timber frame is common in newer Scottish homes, and as the frame dries and settles, skirting and sealant joints can open up. Floors around Perth and Kinross run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. That is why the skirting and threshold joints need a flexible seal.
Community buildings like Moulin Church are part of the picture too: floor and skirting joints in halls and kitchens wear like any others.
Moulin is about 17 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Jobs in Moulin get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. Our Perth and Kinross coverage runs to 107 places, Moulin among them. We also work in Dundee, around 33 miles away.
We work across PH16 for floor joint sealing. Streets in the area include Manse Road, Duff Avenue and Baledmund Road. We also cover the places around Moulin: Pitlochry (1 mile south), Port na Craig (1 mile south), Grandtully (4 miles south-west), Ballinluig (4 miles south-east) and Little Ballinluig (5 miles south-west).
What’s near Moulin
In Moulin, that means homes and buildings near Faskally Forest and The Old Mill Inn. Moulin’s nearest station is Pitlochry station, roughly 0.8 miles south-west of the centre. Well-known places in the area include Pitlochry Community Hospital (0.9 miles south-west) and Black Castle of Moulin (under half a mile south-east). For a walk, there’s Loch Broom.
What affects the quote in Moulin
The price is agreed before any work begins. It’s based on:
- The number of rooms or windows
- Access and height
- The old material and how stubborn it is
- Which sealant suits the joint
We don’t show prices on the website, because the cost depends so much on the job itself. For a quick quote, please drop us a line at info@mrmastic.co.uk and we will talk you through it.
What we need to know
You do not need to know the technical terms. It helps if you can tell us:
- Any previous sealing or DIY work
- Photos by email, if that’s easy
- Where the job is, and your postcode
- The problem you’ve noticed
Want a quote for floor joint sealing? Please email us at info@mrmastic.co.uk and tell us about the job. We’ll explain what we’d do and give you a clear quote before we start.
Towns and villages near Moulin
Other services in Moulin
Honest limits
Sealant is not the answer to every problem, and we will tell you before we start. Sealant won’t put right:
- Large cracks that need a surveyor
- Leaks from a failed tanking system
- Tiles that have lifted or broken
If you’re not sure, just drop us a line at info@mrmastic.co.uk and we will give you a straight answer.
Surfaces we seal
- Commercial floors
- Concrete floor joints
- Wet room & bathroom floors
- Skirting boards
- Tiled floors
- Thresholds