Argyll and Bute · Scotland
Mastic man in G84
We cover every part of the G84 postcode district, including Helensburgh, Rhu and Garelochhead. Every joint is properly prepared, with a one-year guarantee.
Places in G84
- Helensburgh
- Rhu
- Garelochhead
- Kilcreggan
- Rosneath
- Clynder
- Shandon
- Cove
- Ardpeaton
- Rahane
- Coulport
- Mambeg
- Portincaple
- Colgrain
Sealant work we offer in G84
- New-build mastic & snagging
- Remedial sealant & repairs
- Gutter, fascia & soffit sealing
- Glazing & conservatory sealant
- Commercial & hotel sealant
- Regrouting
- Window & door mastic
- Sand mastic for sash & case windows
- External & façade joints
- Bathroom & kitchen resealing
- Floor & skirting joints
- Fire-rated sealant
- Every service
Tell us what needs doing and your postcode and we’ll give you a clear price: send an email to info@mrmastic.co.uk.
Postcodes nearby
Elsewhere in Argyll and Bute
Towns and villages in Argyll and Bute
All areas
Bathroom resealing in G84: how it works
Across G84, the joints we reseal are the ones that fail in any home: the long edge of the bath, the base of the shower tray, the back of the basin and the line along the worktop. Each one is stripped, cleaned and dried before new silicone goes in. We are often asked to deal with gaps where the bath or tray has moved and black spots spreading through the bead, on sinks & splashbacks, basins & vanity units and baths.
Good joint work is mostly preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes around two hours for one bath or shower, longer for a whole bathroom.
- First, each joint is checked for movement and signs of water.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- The joint is cleaned, degreased and treated for mould.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, normally around 24 hours.
How we quote
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.
Why book with us
- Fully insured
- Colour picked to suit the job
- Neat joints and a tidy finish
- Approved under the ARBOMaster scheme
Ask for a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we’ll explain what’s involved before giving you a price.
Around Helensburgh
Typical jobs here are in homes near Lomond School, The Henry Bell pub and St Joseph's R.C. Church and the streets around them. There’s a railway station in Helensburgh itself: Helensburgh Central station. A little further out are Ardencaple Castle (1.3 miles west) and Victoria Infirmary (0.5 miles south-east). Green spaces nearby include Lyle Hill.
Bathrooms and kitchens across G84
Homes across G84 range from older properties to new builds, with plenty of rented property in places like Helensburgh, Rhu and Garelochhead. Sound sealant and clean grout keep water out and rooms looking cared for.
Scottish weather is hard on outside joints, especially in the wetter west, while generally soft water means less limescale indoors but no less mould. That shapes the choice of sealant for jobs across G84. Coastal guest houses and holiday lets in G84 can see heavy use in busy months, which is hard on sealant and grout, and the weather is hard on the outside too.
Helensburgh: Managing a site like Lomond School? Then we reseal washrooms and kitchens in schools and businesses as well as homes. Homes close to St Joseph's R.C. Church include some older properties, and timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Common problems we fix in G84
Sealing over old silicone is one of the commonest mistakes we find. New silicone won’t bond to old silicone, so it lifts, lets water in and traps mould underneath.
Common reasons people contact us are:
- Water getting behind the bath panel
- Water escaping at the shower enclosure
- Water getting behind the kitchen upstand
- Smears of silicone across the tiles
Should I try it myself first?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
Work for landlords, hotels and businesses
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we’ll give you a quote.
For anyone letting property in or around G84, several properties can go on one quote. Send us the addresses and the work at each.
Honest limits
We’d rather tell you now than do work that will not last, so these are the limits:
- Cracked or missing grout between tiles (that is regrouting)
- A tray that rocks until it’s re-bedded
- Tiles that have come away from the wall
How we quote for bathroom resealing
There’s no set price list, because jobs vary so much. What we look at:
- The number and length of the joints
- How easy the joints are to reach
- Whether old sealant or filler has to be cut out
- How many areas need sealing
A failed joint rarely gets cheaper to fix by waiting. If you are unsure, email us at info@mrmastic.co.uk and we’ll give you an honest view and a quote.
Helping us quote
To make quoting easier, let us know:
- Any access issues, like height or stairs
- Where the property is
- What the problem is, such as mould, gaps, leaks or cracking
- Pictures of the joints, sent by email
Every job is quoted individually, so start by telling us what you need. Just drop us a line at info@mrmastic.co.uk with the details and send pictures if you have them.
G84: your questions answered
Can you get rid of the black mould in my sealant?
Yes, we replace the mouldy bead. Sprays can fade the marks, but cutting it out and resealing is what lasts. Good ventilation helps keep it away.
Are you fully insured?
Yes. We are fully insured.
How much does bathroom resealing cost in G84?
Every job is different, so each one gets its own quote. For a quick quote, email us at info@mrmastic.co.uk with a short description of the job.
Can I do it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Do the sealants smell?
Some sealants have a smell while they cure, but it fades. Ventilation helps.
Can landlords and businesses book you?
Yes, regularly. Several properties can go on one quote, and between tenancies is a good time for the work.
How long does it take to reseal a bath or shower?
It depends on how many joints there are and how much old sealant has to come out. Allow a couple of hours for a typical bath or shower.