Perth and Kinross · Scotland
New-build mastic & snagging in Bankfoot, Perth and Kinross
Professional new build mastic in and around Bankfoot, with every bit of old sealant taken out first and a one-year guarantee.
- Internal frame sealant that has split
- Shower seals failing in the first year or two
- Sealant applied over dusty or wet surfaces
New build mastic in Bankfoot, done properly
Snagging sealant properly means taking the failed bead out completely. New silicone will not bond to old silicone, so the joint is cut out, cleaned, dried and resealed. We work on plot handovers, show homes and skirting & floors, and people most often call us about messy sealant that spoils new finishes and gaps opening as the house dries out and settles.
Timber frame is common in newer Scottish homes, and it settles over the first years, which shows as gaps at skirtings and floor joints. Older stone-built homes, meanwhile, often have timber floors that move with the seasons.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.
- Location
- Bankfoot (PH1)
- Region
- Perth and Kinross
- Guarantee
- One year on every job
- Quotes
- A clear price before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What we do, step by step
At the end, we look at the finished work together and tell you how long to leave it. The work normally takes a few hours for most snagging lists, longer for a run of plots, depending on the size of the job. In smaller Scottish places, parking is generally less of an issue than access and distance. Tell us how to find the property and how to reach the work, and the visit is planned around that.
- First, the list of joints is agreed from your snagging sheet or plot schedule.
- The failed sealant is removed completely.
- We clean out the dust and grit left from the build.
- We prime where needed and apply a sealant suited to each joint.
- Each bead is tooled and the cure times explained.
Preparing for the visit
- Mention any sign-in or site rules at work premises
- Tell us if parking is tricky
- Let us know about stairs, lifts or work at height
Getting a quote
To get a quote, send an email to info@mrmastic.co.uk with the location and a short description of the problem. We’ll give you a clear price before any work starts.
Advice
Also in Bankfoot
How we quote for new build mastic
You’ll get a clear quote before work begins. It’s based on:
- The size of the job
- Whether the work is at height
- Which sealant suits the joint
- How many areas need sealing
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
Asking for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- The rough size of the job
- A few photos by email, if you can
- The problem you’ve noticed
- Whether it’s a home or a business
We quote each job on its own. Simply drop us a line at info@mrmastic.co.uk and describe the job, and photos are welcome.
Surface by surface
Skirting and floors
Gaps under skirting are one of the most common new-build snags. A flexible sealant closes it without cracking like caulk.
Plot handovers
Plot mastic is carried out to the developer’s schedule. Each joint is cleaned and primed where needed.
Bankfoot questions
Is Bankfoot within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
Is Bankfoot in your area for new build mastic?
Yes. Our work covers the whole of Scotland, and Bankfoot is part of that. Just email us at info@mrmastic.co.uk with a few details of the job.
Will the old sealant be removed?
Yes. Sealing over the old bead is the commonest cause of early failure, so we never do it.
Is it worth trying it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Can tenants book the work?
Yes, though it’s best to check with your landlord first. Many landlords are glad to have it sorted.
Should I go to my builder first?
While the snagging or warranty period runs, the builder should be your first contact. If it is not sorted, or keeps failing, get in touch with us.
What does new build mastic cost?
Size, access and the old material all affect the cost. Ask us for a quote.
How long will you be here?
A typical job takes a few hours in a single home, including preparation and clearing up. We will confirm how long when we quote.
How to look after the new joints
So the new joints stay in good condition:
- Put sealant faults on your snagging list early
- Photograph failed sealant before it’s redone
- Look at the sealant regularly in the first couple of years
- Get a leaking seal dealt with straight away
Keep the bathroom ventilated, especially in the first year. Use the extractor fan or open a window after showers.
A seal that splits early is often a sign of movement. Getting it resealed properly, and any movement checked, stops it recurring.
Joints and finishes in Bankfoot homes
Many new homes in Scotland are timber-framed, and as the frame dries and settles, skirting and sealant joints can open up.
In and around Bankfoot, as anywhere, good new build mastic starts with a clean, dry, properly prepared joint.
Bankfoot is about 7 miles north of Perth, in Perth and Kinross. For new build mastic in and around Bankfoot, it’s easy to get a quote: please send an email to info@mrmastic.co.uk. We are based in Crawley and cover Perth and Kinross, Bankfoot included. Our area takes in 107 places across Perth and Kinross, large and small. You can also see our page for Dundee, roughly 21 miles from Bankfoot.
Here we cover the PH1 postcode area for new build mastic. Whether your property is on Main Street, Graham Court and Church Lane or a nearby road, our applicators can take on the job. Other places close to Bankfoot include West Tofts (3 miles east), Stanley (3 miles south-east), Murthly (3 miles north-east), Gellyburn (3 miles north-east) and Middleton (3 miles north). Larger places within reach include Perth (7 miles south), Blairgowrie and Rattray (9 miles north-east), Crieff (15 miles south-west), Letham (7 miles south), Scone (7 miles south-east) and Tulloch (6 miles south).
Around Bankfoot
The nearest railway station is Dunkeld & Birnam station, about 4.5 miles north-west of the centre. Well-known places in the area include Murthly Castle (2.8 miles north). The countryside around Bankfoot includes Lily Loch and Birnam Hill.
What we cannot put right
Before you book, it’s worth knowing the limits:
- Cracked trays, tiles or worktops
- Movement caused by a poorly fitted tray or bath
- Deciding who is responsible under a builder’s warranty
If in doubt, email us at info@mrmastic.co.uk and we will say what we think before you book.
Surfaces we seal
- Windows & doors
- Skirting & floors
- Show homes
- Plot handovers
- Kitchens
- Bathrooms & en suites
Landlord and commercial work in Bankfoot
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Do you need new build mastic in Bankfoot?
A new house holds a lot of water from the build, which takes a year or two to dry out. Drying timber shrinks and pulls joints apart and the sealant has to cope with the movement.
Look out for any of the following:
- Beads laid onto grit and dust from the build
- Internal frame sealant that has split
- Sealant work across a run of new homes
- Joints pulling apart as timber shrinks
If you’ve bought a new home near Dunkeld & Birnam station, the sealant around baths, showers and frames is worth checking in the first year or two.
What your quote should include
- Is VAT in the price?
- Are they insured?
- Who turns up on the day
- Is the old sealant removed completely?