Perth and Kinross · Scotland

Floor & skirting joints in Bankfoot, Perth and Kinross

Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for Bankfoot, backed by a 12-month guarantee. Ask us for a quote.

  • Gaps opening between the floor and skirting
  • Grout used at the floor edge instead of sealant
  • Chipped and open joints in warehouse floors

Floor joint sealing near Bankfoot

Floor joint sealing in Bankfoot, done properly

Tiled floors can crack along the grout when there’s no room for movement. We can turn a line of grout into a movement joint by replacing it with flexible sealant. Typical jobs include gaps at thresholds between rooms and perimeter joints in tiled floors filled with grout, on skirting boards, tiled floors and concrete floor joints.

Work in a place like Bankfoot is planned ahead, journey included. Inside work goes ahead in any weather; outside mastic needs a dry day.

We stand behind the work with a one-year guarantee.

Mr Mastic applicators lined up beside the company vans, one holding a sealant gun
Place
Bankfoot (PH1)
Wider area
Perth and Kinross
Cover
One year on every job
Quote
Quoted before any work starts
Email
info@mrmastic.co.uk
Updated
26 October 2026

How to look after the new joints

After the cure time, these simple habits help:

  • Check the sealant is paintable before decorating
  • Don’t slide heavy items over sealed joints
  • Keep heavy wheels off new concrete joints until cured
  • Keep dirt out of the joints

Check the joints after the first winter. If anything has opened, it’s easy to reseal.

A gap under the skirting collects dust and lets draughts through. Sealing it keeps the room tidier and stops it getting worse.

What happens on the day

Every visit runs the same way: we check the joints, mask and protect the surrounding surfaces, carry out the job and tidy away. Most jobs take a few hours, depending on the length of joint. Outside jobs in Bankfoot need a dry day, because sealant will not bond to a wet joint, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.

  1. The room is cleared along the joints so we can reach them.
  2. Old material is removed from the joint.
  3. Edges are cleaned and dried.
  4. A flexible sealant suited to the floor is applied.
  5. Finally, we check the work and talk you through aftercare.

Before we arrive

  • Plan for the work area to be out of bounds to pets and children
  • Where the joints are inside, avoid wetting them before we arrive
  • Move anything stored near the joints

Get a quote

The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that is easy.

Get a price

Related advice

What floor joint sealing looks like in Bankfoot

Across Perth and Kinross, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they don’t all move the same way. That is why the skirting and threshold joints need a flexible seal. Many new homes in Scotland are timber-framed, so skirting and sealant joints can open up as the building settles.

If you let a flat or house near Dunkeld & Birnam station, open skirting and floor joints collect dirt and water, so seal them while the property is empty. Community buildings like Auchtergaven Parish Church are part of the picture too: floor and skirting joints in halls and kitchens wear like any others.

Bankfoot is about 7 miles north of Perth, in Perth and Kinross. If you need floor joint sealing in Bankfoot, it’s easy to get a quote: please drop us a line at info@mrmastic.co.uk. We are based in Crawley and cover Perth and Kinross. Bankfoot is one of 107 places in Perth and Kinross we cover for floor joint sealing. Dundee is on our list too, around 21 miles away.

Here we cover the PH1 postcode area for floor joint sealing. Local streets include Main Street, Graham Court and Church Lane, all of which we cover. We also cover the places around Bankfoot: West Tofts (3 miles east), Stanley (3 miles south-east), Murthly (3 miles north-east), Gellyburn (3 miles north-east) and Middleton (3 miles north). Larger places within reach include Perth (7 miles south), Blairgowrie and Rattray (9 miles north-east), Crieff (15 miles south-west), Letham (7 miles south), Scone (7 miles south-east) and Tulloch (6 miles south).

Around Bankfoot

The closest station to Bankfoot is Dunkeld & Birnam station, about 4.5 miles north-west. Other landmarks nearby include Murthly Castle (2.8 miles north). Open spaces near Bankfoot include Lily Loch and Birnam Hill.

Map of Bankfoot © OpenStreetMap contributors

Why act early in Bankfoot

Putting new grout into a crack that keeps reappearing does not last. The movement is still there, so the grout fails again. Replacing that line with flexible sealant gives it somewhere to go. In an older home around Bankfoot, damp from a failed joint can get into timber and plaster.

Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Ask us for a quote and we will explain what it covers.

Why book with us

  • Every job guaranteed for a year
  • An ARBOMaster approved applicator
  • Trusted Arbo and Everbuild sealants
  • Over 20 years’ experience

Read our cost guide or customer reviews.

What affects the cost of floor joint sealing

Your quote is based on your job. We take into account:

  • How much there is to do
  • Access and height
  • Which sealant suits the joint
  • The old material and how stubborn it is

Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.

What we need to know

The more you tell us, the more accurate the quote. When you ask for a quote, tell us:

  • Whether it’s a home or a business
  • Access, such as stairs, a lift or height
  • What the problem is, such as mould, gaps, leaks or cracking
  • The address or postcode of the job

For a quick quote, get us on the phone, or email us if that’s easier. Tell us about the joints that need doing and we’ll explain what’s involved before giving you a price.

For landlords and businesses

If you manage several properties in or around Bankfoot, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs.

From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.

What the job involves on each surface

Commercial floors

In commercial buildings, we can plan floor joint work around opening hours. Out-of-hours working can be arranged if the floor is busy.

Thresholds

Thresholds take daily traffic, so we choose a hard-wearing, flexible product and neatly finished.

Questions from Bankfoot

Is Bankfoot within the area you cover?

Yes. Bankfoot is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Just mention lanes, gates or anything else about the route when you book.

Do you work for landlords with property near Dunkeld & Birnam station?

Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just send an email to info@mrmastic.co.uk with the address and what needs doing, and we will give you a clear quote.

Is it worth trying it myself?

Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.

Can I add another job to the visit?

Yes. Tell us about everything you’d like done.

How long does floor joint sealing take?

Most jobs take a morning or an afternoon for most homes, including preparation and clearing up. Your quote will say how long we expect yours to take.

Is there any odour?

That depends on the sealant. Some products have a noticeable smell, others very little, and any smell fades as they cure.

Can new sealant go over the old?

No. We remove every bit of old sealant first.

Do you offer different sealant colours?

In most cases you can choose. We’ll tell you which colours the right product comes in and agree one before any work starts.

What sealant work cannot fix

We will always be straight with you, so here’s what new sealant will not do:

  • Concrete repairs beyond the joint
  • Structural movement or subsidence
  • Water getting under the tiles from elsewhere

If in doubt, send an email to info@mrmastic.co.uk and we will say what we think.

Where we work in Bankfoot

  • Concrete floor joints
  • Skirting boards
  • Tiled floors
  • Commercial floors
  • Thresholds
  • Wet room & bathroom floors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job