Perth and Kinross · Scotland

New Build Mastic in Crieff

Professional new build mastic in and around Crieff, with every bit of old sealant taken out first and a 12-month guarantee.

  • Gaps opening as the house dries out and settles
  • Skirting joints opening in the first winter
  • Frame joints opening as the plaster dries

New build mastic for Crieff homes and businesses

What sealant work cannot fix

Honest advice matters more to us than a booking, so here’s what sealant can’t fix:

  • Settlement cracks that need a surveyor
  • Deciding who is responsible under a builder’s warranty
  • Damaged fittings that need replacing

If you’re not sure, just email us at info@mrmastic.co.uk and we will give you a straight answer.

Where we work in Crieff

  • Bathrooms & en suites
  • Plot handovers
  • Show homes
  • Kitchens
  • Skirting & floors
  • Windows & doors

About our new build mastic in Crieff

We carry out plot mastic and second-fix sealing for builders, and snagging reseals for new-home owners. In both, preparation makes the difference. We work on kitchens, windows & doors and skirting & floors, and people most often call us about beads laid onto grit and dust from the build and cracked sealant around new window and door frames.

For a place like Crieff, the journey and access are planned in advance. Outdoor plot mastic needs dry weather, but indoor floor and skirting joints can be sealed whatever the forecast.

Every job is covered by our 12-month guarantee, wherever you are in Perth and Kinross.

Location
Crieff (PH7)
Wider area
Perth and Kinross
Guarantee
One year on every job
Quotes
A clear quote up front
Email
info@mrmastic.co.uk
Last updated
26 October 2026
Mr Mastic applicator sealing the vertical joint between a glass shower screen and tiled wall

The process

The work is kept neat and contained to the joints we’re treating. Expect the work to take a few hours in a single home, and we tell you how long to leave it before we go. For a place like Crieff, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.

  1. First we work through your snagging list or plot schedule with you.
  2. We cut out every bit of the failed or messy sealant.
  3. Surfaces are cleaned of building dust and primed where needed.
  4. New sealant suited to each joint is applied and tooled neatly.
  5. Finally, each room is checked and you’re given the cure time.

How to prepare

  • Mention any tricky access
  • Tell us about any previous sealing or DIY attempts
  • Keep pets and children clear of the area while we work

Ask for a quote

Every job is quoted individually, so start by telling us what you need. Simply send an email to info@mrmastic.co.uk and describe the job and send pictures if you have them.

Get a quick quote

Advice

What we are called out for in Crieff

If plaster or screed was still damp when it was sealed, the bond suffers. On a busy site, joints aren’t always given time to dry before the sealant goes on.

These are the problems we are asked about most:

  • Messy sealant that spoils new finishes
  • Gaps between new skirting and floors
  • New-build shower sealant that has already split
  • Cracked sealant around new window and door frames

Whether the job is in Crieff itself or nearby, the right material for each joint matters as much as a neat finish.

Comparing quotes

  • What the quote includes, VAT included or not
  • How much experience the applicator has
  • What happens if they find a problem under the old sealant
  • When the joint can take water or movement

How to choose a mastic man

New build mastic around Crieff

Many new homes in Scotland are timber-framed, and as the frame dries and settles, skirting and sealant joints can open up.

In and around Crieff, as anywhere, good new build mastic starts with a clean, dry, properly prepared joint.

Crieff is about 15 miles west of Perth, in Perth and Kinross. If you need new build mastic in Crieff, it’s easy to get a quote: please send an email to info@mrmastic.co.uk. We are based in Crawley and cover Perth and Kinross. Our Perth and Kinross coverage runs to 107 places, and Crieff is one of them. Dundee is on our list too, around 34 miles away.

All of PH7 is within our area for new build mastic, from the main roads to the quietest streets. If you need new build mastic at a property on High Street, West High Street and East High Street or a nearby road, our applicators can take on the job. Main roads around Crieff include the A85 and A822, so getting to you is simple. Neighbouring places we cover for new build mastic include Gilmerton (2 miles north-east), Muthill (3 miles south), St David's (5 miles east), Madderty (5 miles east) and Comrie (6 miles west). Within a short drive, we also cover Perth (15 miles east), Auchterarder (7 miles south-east), Letham (14 miles east), Tulloch (14 miles east), Oakbank (14 miles east) and Hillyland (14 miles east). Crieff is one of the larger places we cover in Perth and Kinross.

Landmarks near Crieff

Locally, jobs take us to homes and businesses close to The Pretoria Public House and the streets around them. Nearby you will also find Crieff Community Hospital (under half a mile south-west) and Crieff and Strathearn Museum (under half a mile west). Not far away are Loch Monzievaird.

Map of Crieff © OpenStreetMap contributors

What affects the cost of new build mastic

You will get a clear quote before work begins. It’s based on:

  • The amount of work
  • The type of sealant required
  • The number of rooms or windows
  • Working hours on commercial sites

We do not show prices on the website, because the cost depends so much on the job itself. Call for a quick quote.

What to tell us for a quote

To help us quote quickly, let us know:

  • The problem you’ve noticed
  • The address or postcode of the job
  • The rough size of the job
  • Whether it’s a home or a business

We do not publish a price list, because every job is different. Instead, your job gets its own clear quote. To arrange one, send an email to info@mrmastic.co.uk.

What happens if it’s left?

If you are still in the builder’s snagging or warranty period, ask them to put it right first. If it’s slow, or the same joint keeps failing, a proper reseal from a specialist is the next step. Around Crieff, water from a failed joint in an older stone home can soak into timber and plaster.

The cost depends on the amount of work, how much old material has to come out and how easy the joints are to reach. You will have a clear quote before any work starts.

Why book with us

  • Sanitary silicone with an anti-fungal additive in wet areas
  • Neat joints and a tidy finish
  • Approved under the ARBOMaster scheme
  • We never seal over old sealant

Read our cost guide and customer reviews.

Surface by surface

Windows and doors

A draught at a new window can be a missed or failed joint. We check and reseal the frame edges.

Bathrooms and en suites

En suite showers are a common source of leaks into the room below. Resealing properly keeps water where it belongs.

DIY versus a professional finish

Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.

If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.

Your questions about new build mastic in Crieff

Is new build mastic in Crieff guaranteed?

Every job comes with our 12-month guarantee, wherever it is. We are fully insured, and an ARBOMaster approved applicator.

Do you cover smaller places like Crieff?

Yes. Crieff is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Just mention lanes, gates or anything else about the route when you book.

Which products do you use?

The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.

Why does sealant fail so quickly in new builds?

Cracking in the first couple of years is common. Rushed application on dusty surfaces makes it worse.

Can I do it myself?

Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.

Do you hold any approvals?

Yes. We are an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.

Do I have to be there?

That depends on where the joints are. Inside work needs someone to give us access.

What information do you need?

Just the basics: where it is, what you’ve noticed and how we reach it. Then email us at info@mrmastic.co.uk.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job