Perth and Kinross · Scotland
New-build mastic & snagging in Comrie, Perth and Kinross
Specialist new build mastic for Comrie: careful preparation, the right product and tidy work. Call for a quick quote.
- Gaps behind new kitchen upstands
- Second-fix sealing on new plots
- Skirting joints opening in the first winter
New build mastic for homes and businesses in Comrie
A new build should have a neat, sound bead at every joint. When the finish is smeared, patchy or already cracking, it’s worth putting right early, before water reaches anything behind it. We work on windows & doors, show homes and kitchens, and the jobs we see most are sealant applied over dusty or wet surfaces and kitchen sealant that has pulled off the wall.
For a place like Comrie, the journey and access are planned in advance. Outdoor plot mastic needs dry weather, but indoor floor and skirting joints can be sealed whatever the forecast.
Your job is guaranteed for a year, as with all our work.
- Where
- Comrie (PH6)
- Wider area
- Perth and Kinross
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Can I do it myself?
If you’ve already had a go yourself, that’s fine. We cut it out and start again, so just mention it when you contact us.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
FAQs for Comrie
Is Comrie within the area you cover?
Yes, smaller places are covered as well as towns. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Is new build mastic in Comrie guaranteed?
Every job comes with our 12-month guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.
Does someone need to be in?
It depends on the job. For work indoors, someone needs to let us in, while outside work can sometimes be arranged differently.
Can you work from my snagging list?
Yes. Send it with pictures and we will quote for the sealant items. If something is not sealant, we’ll say so.
Which products do you use?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
Will you just run a new bead over the existing one?
No. New silicone won’t bond to old silicone, so sealing over the top fails quickly. We cut the old bead out completely.
Do you work for hotels and businesses?
Yes. We work in offices, washrooms, hotels and other commercial premises, as well as homes. We can talk about working times when we quote.
Is it messy?
Very little: the area around the joints is protected first, and we tidy up before we go.
Why deal with it now?
The builder is normally the first port of call while the snagging or warranty period runs. If it keeps failing or isn’t dealt with, we can reseal it properly. Out of town in Scotland, exposed walls take a lot of weather, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
Doing several joints on one visit normally makes better use of the time than several visits. We’ll give you a clear price for the lot.
What you get with us
- We never seal over old sealant
- Neat joints and a tidy finish
- Full insurance on every job
- Trusted Arbo and Everbuild sealants
What the job involves on each surface
Bathrooms and en suites
En suite showers are a common source of leaks into the room below. A proper reseal keeps water in the tray.
Windows and doors
The gap between a new frame and its plaster reveal often opens up. We cut out the cracked bead and reseal with a flexible sealant in a matching colour.
New homes and floors in Comrie
Timber frame is common in newer Scottish homes, and as the frame dries and settles, skirting and sealant joints can open up.
Whether the job is in Comrie itself or nearby, the right material for each joint matters as much as a neat finish. In and around Comrie, as anywhere, good new build mastic starts with a clean, dry, properly prepared joint.
Comrie is about 18 miles north of Stirling, in Perth and Kinross. If you need new build mastic in Comrie, it’s easy to get a quote: please send an email to info@mrmastic.co.uk. We cover Perth and Kinross from our Crawley base. 107 places in Perth and Kinross are on our list, from the larger towns to small villages. There’s also a page for Glasgow, roughly 37 miles from Comrie.
Postcode districts we cover here for new build mastic: PH6. If you need new build mastic at a property on Queens Road, Dukes Road and Glebe Road or a nearby road, we can help. Nearby, we also carry out new build mastic in St Fillans (5 miles west), Crieff (6 miles east), Muthill (7 miles south-east), Gilmerton (7 miles east) and Braco (8 miles south-east).
What’s near Comrie
Nearby you’ll also find Castle Cluggy (4.1 miles east) and Crieff Community Hospital (5.4 miles east). Green spaces nearby include Loch Monzievaird.
What happens on the day
All our tools and materials come with us in the van. After a quick look at the joints together, the area is protected and the work begins. It normally takes anything from a few hours to several days, depending on the number of plots. Somewhere like Comrie may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We start by agreeing which joints are on the list, from the snagging sheet or plot schedule.
- The old bead comes out in full, with no layer left behind.
- Surfaces are cleaned of building dust and primed where needed.
- A sealant chosen for each area goes in and is tooled smooth.
- We check every joint and tell you how long each needs to cure.
How to prepare
- On commercial sites, let us know about site rules
- Let us know about parking restrictions
- Mention any tricky access
Ask for a quote
If you are in Comrie and need new build mastic, email us at info@mrmastic.co.uk. Tell us what the problem is and where, and you’ll get a clear quote before we start.
Advice
Aftercare tips
A little care helps the new joints last. Our advice:
- Check bath and shower seals every few months as the house settles
- Avoid scourers and strong chemicals on sealant
- Put sealant faults on your snagging list early
- Keep pictures and emails about snagging items
Keep an eye on the joints over the first couple of years. Small gaps can appear as the house dries and can be resealed later.
A failed seal in a new home lets water into joists, plasterboard and ceilings. Catching it early keeps the fix to the sealant and protects the rest of the house.
How we quote for new build mastic
The price is agreed before any work begins. It’s based on:
- How many areas need sealing
- Whether the work is at height
- The type of sealant required
- When we can work, for business premises
What you pay reflects the work, not a rough estimate. That is why we ask about the job first and give you a clear quote before any work starts.
Asking for a quote
Before you ask for a quote, have a think about:
- Any access issues, like height or stairs
- Where the property is
- The rough size of the job
- If someone has resealed it before
It all starts with a short chat. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. Whenever you are ready, send an email to info@mrmastic.co.uk.
Work for landlords, hotels and businesses
If you manage several properties in or around Comrie, jobs at different addresses can go on one quote. Send us the addresses and the work at each, and pictures by email help.
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll give you a quote.