Hampshire · England
Hollywater Glazing Silicone
Our applicators work in Hollywater on glazing silicone for conservatories, rooflights, glass panels and shower screens. Old material cut out, joints cleaned and sealed neatly and a one-year guarantee.
- Split or lifting silicone on glass
- Sealant that was laid over old silicone and failed
- Failed joints on frameless glass
About our glazing silicone in Hollywater
Glass replacement is not something we do, and misting between panes means a failed sealed unit. Our work is the sealant joints and that is often where the water gets in. Typical jobs include water escaping where a screen meets the wall and glazing silicone that has cracked or come away, on shower screens, conservatory frames and rooflights.
Homes in small places like Hollywater often stand in the open, with little to shelter their windows from wind and rain. That exposure dries out and cracks the mastic around frames and sills faster.
Each job carries a 12-month guarantee, large or small.
- Location
- Hollywater (GU35)
- Wider area
- Hampshire
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
What happens on the day
All our tools and materials come with us in the van, so you don’t need to buy or prepare anything. After a quick look at the joints together, we protect the area and start. Most jobs take a few hours, depending on how many joints need doing. In a small place like Hollywater, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we agree the joints to be done.
- Old sealant is removed from the glass and frame.
- The surfaces are cleaned with a suitable solvent.
- New glazing silicone goes in and is finished neatly.
- The joints are checked before we leave.
Getting ready for the visit
- Mention if the joints have been sealed before
- For indoor joints, keep the area dry beforehand if you can
- Mention any sign-in or site rules at work premises
Getting a quote
Asking for a quote is easy: let us know the job and the location and its rough size. Photos by email help us understand the job, and we’ll take it from there.
Advice
Also in Hollywater
Quotes for glazing silicone in Hollywater
For a quick quote, just ask. The main things that affect it are:
- Mould in or behind the old joints
- How easy the joints are to reach
- How much old sealant there is and how hard it is to remove
- The size of the job
Combining jobs into one visit is normally more efficient than separate visits, so it’s worth mentioning everything you’d like done. You will get one clear quote for the whole job.
Asking for a quote
To help us quote quickly, please include:
- Any previous sealing or DIY work
- Roughly how big the job is
- A few pictures by email, if you can
- Where the job is, and your postcode
It all starts with a short chat. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. When it suits you, ring 0345 464 0079 or send us an email.
Why deal with it now?
Dealing with a leaking shower screen early protects the floor and ceiling. Water from a failed joint can soak into the floor before it shows. Around Hollywater, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
What you get with us
- 180+ five-star Google reviews
- 20+ years of sealant experience
- Any old sealant cut out fully, not covered over
- Trusted Arbo and Everbuild sealants
Can I do it myself?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.
Landlords, agents and businesses in Hollywater
We work for landlords and letting agents as well as householders. Resealing between tenancies is a simple way to keep a property in good order.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Questions from Hollywater
Is Hollywater within the area you cover?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you cover Hollywater for glazing silicone?
Yes, Hollywater is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or send us an email with a few details of the job.
Should I try DIY first?
You can, for simple jobs. The key is preparation: remove all the old material and work on a clean, dry joint. If it does not work out, we can redo it.
Do you have insurance?
Yes. We’re fully insured for every job we do.
Can I choose the sealant colour?
We help you choose a colour that suits. The choice depends on the product the joint needs.
Do you fit new glass or sealed units?
Glass replacement is not our trade. We look after the sealant joints and can tell you if a unit seems to have gone.
Is a special sealant needed for glass?
A glazing silicone chosen for the joint. Neutral-cure silicone is the usual choice.
Is there any odour?
Possibly a little. It fades as the sealant cures, and ventilation helps.
What glazing silicone looks like in Hollywater
Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
Homes close to St Mark's Sacred Church include some older properties, and frames set in older brick or stone need a sealant that suits the wall as well as the frame. For site and facilities teams at buildings such as Woodlea Primary School, larger buildings have plenty of frames, and the mastic around each one ages. For landlords with property near Liphook station, leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies.
Hollywater is about 6 miles south-east of Alton, in Hampshire. We provide glazing silicone to homes and businesses in Hollywater, as part of our work across Hampshire. Hollywater is one of 683 towns and villages in Hampshire we cover for glazing silicone. There’s also a page for Portsmouth, about 23 miles away.
Every address in GU35 is covered for glazing silicone. Streets in the area include Hollywater Road and Liphook Road, and we cover them all. Neighbouring places we cover for glazing silicone include Standford (1 mile north-east), Whitehill (1 mile west), Deadwater (1 mile north), Bordon (1 mile north-west) and Lindford (1 mile north). Within a short drive, we also cover Farnborough (14 miles north), Fleet (12 miles north), Horndean (15 miles south-west), Aldershot (11 miles north), Alton (6 miles north-west) and Petersfield (8 miles south-west).
Near you in Hollywater
Typical jobs here are in homes near Mill Chase Academy. The nearest railway station is Liphook station, about 3.1 miles south-east. Nearby you’ll also find The Romany Museum (3.9 miles west) and Chase Community Hospital (0.6 miles north-west). The countryside around Hollywater includes Wheeler's Down and Deadwater Valley.
Looking after it afterwards
Simple care keeps the joints in good condition. We recommend:
- Get a new leak looked at quickly
- Check the silicone on glass every year or so
- Keep harsh solvents off the silicone
- Wipe the screen down after showering
Gentle products are best near the sealant. Harsh solvents may damage the bead.
A small conservatory leak soon spreads. Water runs along frames and down walls, so get it looked at when you first see it.
Different surfaces, different methods
Glass-to-glass joints
Frameless glass corners and panels are joined with silicone. We reseal with a suitable glazing silicone.
Glass-to-frame joints
Glass-to-frame joints need a sealant that bonds to both. We use a glazing silicone suited to each.