Hampshire · England
Glazing Silicone in Fleet
Glazing silicone for conservatories, rooflights, glass panels and shower screens for homes and businesses in Fleet and across Hampshire. Fully insured, ARBOMaster approved and guaranteed for a year.
- New silicone smeared over old sealant
- Silicone pulling away from the glass
- Drips on the inside of a conservatory window
Glazing silicone in Fleet, done properly
Glass and frames expand and contract differently, and the silicone between them takes the strain. When it cracks or lets go, water gets in. We replace it with a glazing silicone that suits the glass and frame. We’re often asked to deal with water tracking down the inner face of the glass and stained, discoloured glazing silicone, across glass-to-glass joints, glass-to-frame joints and glass balustrade bases.
In a town like Fleet, the windows on the most exposed side of a house take the brunt of the rain, so the mastic there tends to fail first. Checking every frame, not just the obvious one, is time well spent.
Your job is guaranteed for a year, as with all our work.
- Location
- Fleet (GU51, GU52, GU10)
- Wider area
- Hampshire
- Cover
- A year, on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Different surfaces, different methods
Shower screens
A screen’s wall joint and tray joint are where leaks start. Both are resealed with anti-fungal silicone.
Glass-to-frame joints
Where glass sits in a frame, silicone keeps water out. A failed bead lets water in.
Towns and villages near Fleet
Other services in Fleet
Keeping the joints in good condition
A little care helps the new joints last. We recommend:
- Avoid scraping close to the bead
- Ventilate the conservatory to cut condensation
- Use gentle products around the joints
- Look over the glazing joints once a year
Don’t use blades or scrapers near the bead when cleaning the glass. A soft cloth or sponge is best.
Drips or damp near a glazing joint shouldn’t be ignored. The cause may be sealant or another part and we’ll find out which.
Should I try it myself first?
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
Fleet homes and the weather
With historic houses such as Farnham Castle (about 4.1 miles south) nearby, there’s older building stock in the area around Fleet as well as newer homes. Where a home is older, older timber frames in brick or stone need a different approach from a modern uPVC window. Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
Letting a property close to Fleet station? Then leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies. For site and facilities teams at buildings such as Heatherside Junior School, larger buildings have plenty of frames, and the mastic around each one ages.
Fleet is about 13 miles south-east of Reading, in Hampshire. Fleet gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. Fleet is one of 683 towns and villages in Hampshire we cover. You can also see our page for Reading, roughly 13 miles from Fleet.
Jobs for glazing silicone in GU51, GU52 and GU10 is quoted and booked the same way as anywhere else. Whether your property is on Church Road, Durnsford Avenue and Hankins Court or a nearby road, our applicators can take on the job. You’ll find Fleet on the A323 and A3013, so it’s easy for us to get to. Neighbouring places we cover for glazing silicone include Church Crookham (1 mile south-east), Crookham Village (1 mile west), Elvetham Heath (1 mile north-west), Dogmersfield (2 miles west) and Elvetham (2 miles north-west). Within a short drive, we also cover Basingstoke (11 miles west), Farnborough (3 miles north-east), Aldershot (4 miles south-east), Alton (10 miles south-west), Yateley (4 miles north) and Tadley (14 miles north-west). Fleet is among the bigger towns we cover in Hampshire.
Local landmarks in Fleet
In Fleet, that means homes and buildings near Court Moor School, The Prince of Wales pub and School, among other places. The nearest railway station is Fleet station, roughly 1.2 miles north of the centre. Nearby you’ll also find Royal Army Dental Corps Historical Museum (3.9 miles east) and Fleet Community Hospital (1 mile north-west). Green spaces nearby include Fleet Pond Nature Reserve and Hitches Hill.
When to call us in Fleet
Shower screen silicone gets wet every day. Mould grows into the bead and the joint starts to lift.
These are the problems we’re asked about most:
- A quick top-up bead that didn’t last
- Glass-to-glass joints that have split
- Black or yellowed silicone on glass joints
- Failed sealant around rooflight glass
If you live in an older home near Fleet Methodist Church, the windows may be timber, sash or later replacements, and each needs the right sealant against the wall.
Before booking anyone
- Which sealant they’ll use, and why
- Is the old sealant removed completely?
- Who does the work, and how experienced they are
- How the colour is chosen
Landlords, agents and businesses in Fleet
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll quote.
Housing providers, facilities teams and property managers book us too in Fleet and across Hampshire. Several sites can be quoted together, and we’re fully insured for the work.
Your questions about glazing silicone in Fleet
Is there a guarantee on glazing silicone in Fleet?
All our work, in Fleet and everywhere else, comes with a 12-month guarantee. We are also fully insured and ARBOMaster approved.
Do you work for landlords with property near Fleet station?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or email us with the address and a few details, and we will give you a fixed price before any work starts.
Is it worth trying it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. If it doesn’t work out, we can redo it.
Will the old sealant be removed?
Yes. Sealing over the old bead is the commonest cause of early failure, so we never do it.
Do I need to be at home?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
Do you replace glass?
No. A misted unit has failed inside, and a glazier needs to replace it.
Which products do you use?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice, and we’ll explain our choice.
Do you do commercial work?
Yes. We work in offices, washrooms, hotels and other commercial premises. Working times can be discussed when we quote.
Leave it or put it right?
A new conservatory roof is a big job. Where the water is getting in through sealant renewing the joint is the simpler fix. If it’s the roof itself, we will tell you. In Fleet, as anywhere, most leaks start as a small gap in a joint, and they’re far easier to fix early.
A failed joint rarely gets cheaper to fix by waiting. If you’re unsure, call 0345 464 0079 or send us an email for an honest opinion and a quote.
Why book with us
- A sealant colour to suit the surroundings
- Anti-fungal sanitary silicone in wet areas
- Every job guaranteed for a year
- Tidy, careful work
Read our cost guide or what customers say.
What happens on the day
There’s no need to move everything out before we come, only the area right around the joints. We protect the rest, and the job takes anything from an hour or two to most of a day, depending on the size of the job in most cases. Parking in a town like Fleet is usually straightforward, but tell us if there’s a driveway or any restrictions, and let us know if the work is upstairs, in a flat or up high outside.
- First, we check where the water gets in.
- We remove the old sealant carefully.
- The joint is cleaned and degreased.
- A neutral-cure glazing silicone is applied and tooled.
- Each joint is checked and, where possible, water-tested.
Getting ready for the visit
- On commercial sites, let us know about site rules
- Tell us about any previous sealing or DIY attempts
- Tell us about access, such as stairs, a lift or high-level joints
Getting a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we will explain how we’d tackle it. Whenever you are ready, phone 0345 464 0079 or drop us an email.