Hampshire · England
Gutter Sealing in Fleet
Gutter sealing for Fleet, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Open joints in fascias and soffits
- Drips from gutter joints and end caps
- Damp on an inside wall under a dripping gutter
Questions from Fleet
Do you cover Fleet for gutter sealing?
Yes. We work across London and the South East, and Fleet is part of that. Just ring 0345 464 0079 or drop us an email with a few details of the job, and we’ll give you a clear quote.
I let a flat near Fleet station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just phone 0345 464 0079 or email us with the address and what needs doing, and we will give you a clear quote.
What about gutters on a second or third storey?
It depends on the access. Tell us the height and what’s around the gutter and we will confirm what’s needed.
Do you do commercial work?
Yes, regularly. We can plan bigger jobs in stages to suit the site.
Can new sealant go over the old?
No. Fresh sealant does not stick to old sealant, and anything trapped underneath, including mould and water, stays there. We remove it all first.
Can you fit new guttering?
No. We seal leaking joints, end caps and trims. Replacement needs a gutter installer or roofer.
When is the sealant fully cured?
Many sealants skin over quickly but take longer to cure fully. We will give you the cure time for the product we used before we leave.
Is it messy?
We keep the work tidy. We protect what’s around the joints, and the area is left clean when we finish.
About our gutter sealing in Fleet
Many dripping gutters are just a failed joint or end cap. We clean out the joint, dry it and reseal it using a gutter sealant. If the gutter itself has failed, we say so. Common call-outs are for gaps along fascia and soffit joints and drips from gutter joints and end caps, across gutter joints, gutter end caps and soffit joints.
Extensions are a common sight on houses around Fleet, and the joint where new wall meets old is a classic place for water to get in. Sealing it properly means the right joint depth and a flexible sealant, not a quick bead.
You are covered for a year from the day we finish. If there’s a problem with it, please phone 0345 464 0079 or drop us an email.
- Place
- Fleet (GU51, GU52, GU10)
- Wider area
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- A clear price before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Towns and villages near Fleet
What else we do in Fleet
Surface by surface
Soffit joints
Gaps at soffit joints can let in draughts and insects. We close them with a suitable sealant.
Garage door frames
Resealing a garage door frame keeps rain and draughts out.
Why it’s worth doing now in Fleet
A new garage door is not needed for a leaking frame. Resealing the frame joint is often enough. Black mould and gaps in sealant do not fix themselves, and in a busy household in Fleet they spread with every shower and every downpour. Replacing the sealant now is the simplest fix.
A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether the work is at height. We take all of that into account in your quote.
Why Fleet customers choose us
- Arbo and Everbuild products
- Old sealant always removed completely
- More than 20 years in sealant work
- Anti-fungal silicone where joints get wet
Read what affects the cost or customer reviews.
Walls and rooflines in Fleet
Compared with the north and west, the South East gets less rain, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day. Historic houses like Farnham Castle (about 4.1 miles south) are a reminder that the area around Fleet has older buildings as well as new. In older buildings, older brick and stone need a sealant that suits them, at the right joint depth.
If you look after a building such as Heatherside Junior School, movement joints, cladding joints and gutters on larger buildings need the same care as a house’s. Homes close to Fleet Methodist Church include some older properties, and older walls, gutters and the joints where extensions meet them need a flexible sealant. Rented homes near Fleet station change hands often, and a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking.
Fleet is about 13 miles south-east of Reading, in Hampshire. Whether you’re in the middle of Fleet or further out, gutter sealing is available for homes and businesses alike, from flats and houses to offices and hotels. We cover 683 towns and villages across Hampshire. You can also see our page for Reading, about 13 miles away.
Our applicators cover all of GU51, GU52 and GU10 for gutter sealing. If you need gutter sealing at a property on Church Road, Durnsford Avenue and Hankins Court or a nearby road, we can help. Fleet is on the A323 and A3013, which makes it straightforward to reach with everything needed for gutter sealing. If you’re just outside Fleet, we cover Church Crookham (1 mile south-east), Crookham Village (1 mile west), Elvetham Heath (1 mile north-west), Dogmersfield (2 miles west) and Elvetham (2 miles north-west). We also work in nearby towns such as Basingstoke (11 miles west), Farnborough (3 miles north-east), Aldershot (4 miles south-east), Alton (10 miles south-west), Yateley (4 miles north) and Tadley (14 miles north-west). As one of the bigger places in Hampshire, Fleet has every kind of property, from flats to offices.
Local landmarks in Fleet
Typical jobs here are in homes near Court Moor School, The Prince of Wales pub and School and the streets around them. The closest station to Fleet is Fleet station, roughly 1.2 miles north of the centre. Well-known places in the area include Royal Army Dental Corps Historical Museum (3.9 miles east) and Fleet Community Hospital (1 mile north-west). The countryside around Fleet includes Fleet Pond Nature Reserve and Hitches Hill.
How to look after the new joints
Good habits help new joints last longer. A few tips:
- Make sure downpipes are not blocked
- Deal with a drip before winter
- Look for streaks or damp on the wall below gutters
- Check fascia and soffit joints for gaps
Give the sealant the cure time we tell you and avoid disturbing it.
Early sealing limits how much water hits the wall. We will let you know if the gutter needs more than sealant.
DIY sealant or a professional job?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Quotes for gutter sealing in Fleet
For a quick quote, just ask. The main things that affect it are:
- Any mould that needs treating
- How many rooms, windows or areas are involved
- The old material and how stubborn it is
- The size of the job
No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all make a difference.
Helping us quote
Before you ask for a quote, have a think about:
- Roughly how big the job is
- Access, such as stairs, a lift or height
- What the problem is, such as mould, gaps, leaks or cracking
- If it’s domestic, commercial or a hotel
We quote each job on its own. Simply call 0345 464 0079 or send us an email and describe the job, and pictures are welcome.
For landlords and businesses
Landlords and agents in Fleet can book us as well as householders. Resealing between tenancies is a simple way to keep a property in good order.
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
What happens on the day
Every visit runs the same way: we look at the joints together, protect the area around them, do the work and tidy away. It normally takes anything from an hour or two to a few hours. A visit in Fleet needs access to the work and a place to park close by. If the job is outside, mention gates, side access and anything above ground floor.
- We find where the water is coming from and check the gutter is sound.
- The old sealant and dirt are cleaned out of the joint.
- We dry the joint so the new sealant can bond.
- A gutter sealant is applied to the joint.
- The gutter is checked and debris around the joints cleared.
Before we arrive
- Try not to wet indoor joints just before the visit
- Let us know about parking restrictions
- Clear the area around the work
Getting a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. Whenever you’re ready, ring 0345 464 0079 or email us.