Hampshire · England
Remedial Sealant in Fleet
Professional remedial sealant in and around Fleet, with every bit of old sealant taken out first and a 12-month guarantee.
- Over-sealed joints coming away
- A shower that leaks however often it’s resealed
- Mould trapped under a layer of silicone
Surface by surface
Mouldy bath & shower sealant
Mould can sit behind the silicone, not just in it. We treat the exposed joint once the bead is out.
Windows & doors
A frame that keeps leaking may not be the mastic. We check the joint and tell you if it looks to be something else.
Remedial sealant in Fleet
Getting old sealant out properly is slow, careful work. Every layer is cut out, the residue cleaned off and the joint degreased, without scratching tiles, trays or frames. New sealant only bonds to a clean, dry joint. Typical jobs include kitchen joints letting water behind the worktop and caulk or the wrong sealant used in a wet area, across mouldy bath & shower sealant, expansion joints and failed movement joints.
Around Fleet, it’s mostly busy family bathrooms and kitchens, where sealant and grout take a lot of daily wear. The usual signs are mould in the bead, gaps by the sink and grout that’s cracked or stained.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Location
- Fleet (GU51, GU52, GU10)
- Wider area
- Hampshire
- Cover
- 12 months on all our work
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
When something else is needed
It helps to know what we cannot do:
- Movement from fittings that are not supported
- A tray or bath that’s cracked
- Leaks from a shower valve, waste or pipework (a plumber’s job)
If you are not sure, just ring 0345 464 0079 or send us an email and we will give you a straight answer before you book.
Joints and surfaces we work on
- Failed movement joints
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Expansion joints
- Mouldy bath & shower sealant
- Botched or over-sealed joints
Landlords, agents and businesses in Fleet
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together.
Common questions in Fleet
Can you help a landlord with a rental near Fleet station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. Just ring 0345 464 0079 or email us with the address and what needs doing, and we will send you a clear quote.
Do you work in hotels near Fleet?
Yes, hospitality work, including hotels, is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Do you have insurance?
Yes, we are fully insured for every job we do.
When is the sealant fully cured?
That depends on the sealant used, so follow the cure time we give you when we finish.
What if the leak isn’t the sealant?
We check for that before we reseal. If we find the leak is elsewhere, we tell you before going further.
Can failed expansion joints be resealed?
Yes. Failed movement joints are cut out and resealed with backing and a flexible sealant suited to the movement.
What should I tell you?
Tell us what needs doing and where. If we need more, we’ll ask.
Will you leave a mess?
Tidy work is part of the job. Nearby surfaces are protected.
Bathrooms and kitchens in Fleet
There are hotels and other places to stay in and around Fleet. Hotel bathrooms are part of our work as well as homes, and can be done room by room. Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you let a flat or house near Fleet station, botched sealant from a previous quick fix is easier to strip out between tenants. For site and facilities teams at buildings such as Heatherside Junior School, we reseal washrooms and kitchens in schools and businesses as well as homes. If you live in an older home near Fleet Methodist Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Fleet is about 13 miles south-east of Reading, in Hampshire. Fleet gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. 683 places in Hampshire are on our list. We also work in Reading, around 13 miles away.
Work in GU51, GU52 and GU10 is quoted and booked the same way as anywhere else. Local streets include Church Road, Durnsford Avenue and Hankins Court, and we cover them all. Main roads around Fleet include the A323 and A3013, which makes travel easy. We also cover the places around Fleet: Church Crookham (1 mile south-east), Crookham Village (1 mile west), Elvetham Heath (1 mile north-west), Dogmersfield (2 miles west) and Elvetham (2 miles north-west). We also work in nearby towns such as Basingstoke (11 miles west), Farnborough (3 miles north-east), Aldershot (4 miles south-east), Alton (10 miles south-west), Yateley (4 miles north) and Tadley (14 miles north-west). Fleet is one of the larger places we cover in Hampshire.
What’s near Fleet
Around Fleet, our work takes us to homes and buildings near Court Moor School, The Prince of Wales pub and School, among other places. For rail, the closest station is Fleet station, about 1.2 miles north of the centre. Other landmarks nearby include Royal Army Dental Corps Historical Museum (3.9 miles east) and Fleet Community Hospital (1 mile north-west). For a walk, there’s Fleet Pond Nature Reserve and Hitches Hill.
Also near Fleet
Other services in Fleet
What happens on the day
Most of a good job is in the preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. All told, the work takes a few hours for a typical bath or shower, longer where several layers have been applied. A visit in Fleet needs access to the work and a place to park close by. For outside work, let us know about side access, gates and any upper-floor joints.
- First we work out whether the problem is the sealant, movement or a leak.
- Old beads and residue are removed down to clean surfaces.
- We treat any mould and dry the joint thoroughly.
- We reseal with a product suited to the joint, backed where needed.
- The joint is tooled and you’re told about anything else we found.
Preparing for the visit
- Mention any parking rules near the property
- Mention any leaks or damp you’ve noticed
- Let us know about stairs, lifts or work at height
Ask for a quote
There’s no standard price list. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or send us an email.
Related advice
Can I do it myself?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
What affects the quote in Fleet
You will get a clear quote before any work starts. It takes into account:
- How many rooms, windows or areas are involved
- Any mould that needs treating
- Whether old sealant or filler has to be cut out
- The number and length of the joints
A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you are not sure whether it needs doing, phone 0345 464 0079 or send us an email and we will give you an honest view and a quote.
What we need to know
What to tell us when you ask for a quote:
- How many joints, rooms or windows are involved
- Access, such as stairs, a lift or height
- What’s wrong with the joints now
- Whether it has been sealed before
If you’re in Fleet and need remedial sealant, call 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and you will get a clear quote before work begins.
Looking after it afterwards
Good habits help new joints last longer. Our tips:
- Never fill a movement joint with mortar or grout
- Don’t wait for a small gap to become a leak
- Always have old sealant cut out, not covered
- Find out why the sealant failed first
Do not let anyone seal over it later. Over-sealing is how many remedial jobs start, so the old bead should always come out first.
Do not keep resealing the same joint. Have someone find out why, or the next bead will go the same way.