Hampshire · England

Regrouting in Fleet, Hampshire

Regrouting for Fleet, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.

  • Crumbling grout between the tiles
  • Kitchen splashback grout stained by grease
  • Discoloured grout on otherwise sound tiles

Book regrouting in Fleet

Fleet: your questions answered

Can you help a landlord with a rental near Fleet station?

Yes. We work for landlords and letting agents as well as homeowners, and several properties can be quoted together. Just call 0345 464 0079 or email us with the address and what needs doing, and we’ll send you a clear quote.

Can you do regrouting in Fleet?

Yes. Our work covers London and the South East, and Fleet is part of that. You can call 0345 464 0079 or email us and tell us what needs doing, and we’ll give you a clear price.

What guarantee comes with the work?

Our 12-month guarantee applies to all our work, and we are fully insured.

Will the old sealant be removed?

Always. Sealing over the old bead is the commonest cause of early failure, so we never do it.

Do you reseal at the same time?

In most cases, yes. Corners and edges need flexible silicone, and it makes sense to renew both together.

What sealant do you use?

Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.

Can you change the grout colour?

Yes. Many clients do. Darker grout can hide marks and lighter grout gives a fresher look.

Can I do it myself?

Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.

About our regrouting in Fleet

Regrouting is normally paired with resealing. Grout is for the joints between tiles, but corners and edges move, so they’re sealed with silicone rather than grout. Renewing both together means nothing is left half-done. Typical jobs include grout stained black or orange that won’t clean and grout that makes sound tiles look old, across bathroom floors, kitchen splashbacks and tiled floors.

Around Fleet, it’s mostly busy family bathrooms and kitchens, which is hard on sealant and grout. Black mould along the bath, a lifting bead by the sink or crumbling grout in the shower are the usual signs.

The work is covered for a year after we finish. If anything isn’t right with it, phone 0345 464 0079 or email us.

Place
Fleet (GU51, GU52, GU10)
Wider area
Hampshire
Guarantee
A year, on every job
Price
Quoted before any work starts
Phone
0345 464 0079
Last updated
26 October 2026
Mr Mastic applicator kneeling beside a white bath, sealing the joint where the bath meets beige wall tiles

Regrouting around Fleet

Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in. Fleet has hotels and guest accommodation nearby. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room.

Homes close to Fleet Methodist Church include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant. If you look after a building such as Heatherside Junior School, we reseal washrooms and kitchens in schools and businesses as well as homes.

Fleet is about 13 miles south-east of Reading, in Hampshire. Jobs in Fleet get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. Fleet is one of 683 places in Hampshire we cover for regrouting. We also work in Reading, around 13 miles away.

Our applicators cover all of the GU51, GU52 and GU10 postcode area for regrouting and the streets around it. If you need regrouting at a property on Church Road, Durnsford Avenue and Hankins Court or a nearby road, we can help. Being close to the A323 and A3013, Fleet is simple for us to get to for regrouting. Neighbouring places we cover for regrouting include Church Crookham (1 mile south-east), Crookham Village (1 mile west), Elvetham Heath (1 mile north-west), Dogmersfield (2 miles west) and Elvetham (2 miles north-west). We also work in nearby towns such as Basingstoke (11 miles west), Farnborough (3 miles north-east), Aldershot (4 miles south-east), Alton (10 miles south-west), Yateley (4 miles north) and Tadley (14 miles north-west). Fleet is one of the larger places we cover in Hampshire.

Landmarks near Fleet

Around Fleet, our work takes us to homes and buildings near Court Moor School, The Prince of Wales pub and School and the streets around them. The nearest railway station is Fleet station, roughly 1.2 miles north of the centre. Nearby you’ll also find Royal Army Dental Corps Historical Museum (3.9 miles east) and Fleet Community Hospital (1 mile north-west). Not far away are Fleet Pond Nature Reserve and Hitches Hill.

Map of Fleet © OpenStreetMap contributors

How to look after the new joints

Simple care keeps the joints in good condition. Our advice:

  • Use a soft brush rather than a wire one
  • Get any tile that moves checked promptly
  • Open a window or run the fan to clear steam
  • Wipe water off the walls when you’re done

Give the new grout the time we tell you before using the shower, so it cures fully. From then on, a quick rinse after showering helps and let the room air.

Fixing grout early is a small job. Left for a few years, they can become a leak so it’s worth dealing with as soon as you spot it.

What happens on the day

When we arrive, we start by going over the job with you, so there are no surprises. Surfaces next to the work are protected before any work begins. Most jobs take anything from a few hours to a full day, depending on the area. In Fleet, parking is rarely complicated, though it helps to know about driveways or restrictions, and let us know if the work is upstairs, in a flat or up high outside.

  1. We check the tiles for any that are hollow or loose.
  2. We rake out the grout evenly, protecting the tile edges.
  3. We vacuum the joints so the new grout bonds.
  4. New grout is pressed into the joints and the tiles are cleaned.
  5. We finish with silicone in the moving joints.

Before we arrive

  • Where the joints are inside, avoid wetting them before we arrive
  • Mention any sign-in or site rules at work premises
  • Let us know about stairs, lifts or work at height

How to get a quote

Asking for a quote is easy: let us know the job and the location, and roughly how big it is. A few pictures by email make the job easier to understand, and we will take it from there.

Ask for a quote

Advice

Do you need regrouting in Fleet?

Grout used in corners or along the bath cracks as the bath or tray moves. They need flexible sealant, and if they’re grouted, a crack soon lets water in.

These are the problems we’re asked about most:

  • Good tiles let down by tired grout
  • Floor grout that will not come clean
  • Cracked grout along the bath or tray
  • Stained grout that cleaning will not shift

Rented homes near Fleet station change hands often, and clean grout and fresh sealant between tenancies make a bathroom look cared for again.

Before you book anyone

  • Which colour the sealant will be
  • What the cure time is
  • Who does the work, and how experienced they are
  • What guarantee comes with the work

How to choose a mastic man

What affects the quote in Fleet

The price is agreed before any work begins. It takes into account:

  • How easy the joints are to reach
  • How many areas need sealing
  • How much old sealant there is and how hard it is to remove
  • Mould in or behind the old joints

Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. You’ll know the price before we begin.

Asking for a quote

To help us quote quickly, please include:

  • Any access issues, like height or stairs
  • The problem you’ve noticed
  • If it’s domestic, commercial or a hotel
  • Any previous sealing or DIY work

There’s no standard price list, as no two jobs are quite the same. Instead, we send you a clear quote for your job. To get started, call 0345 464 0079 or send us an email.

What happens if it’s left?

Bleach can lighten stained grout for a while, but stains and mould that have soaked in tend to return. New grout, with silicone in the corners, deals with the cause. Around Fleet, failed sealant lets water into hidden places, such as under the floor, behind a panel or into a wall. Left alone, that means rot, damp and a bigger repair.

Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs. Call for a quick quote and we’ll go through it with you.

Why choose Mr Mastic in Fleet

  • Domestic, commercial and hotel work
  • We’re fully insured
  • Rated 4.9 stars on Google
  • Tidy, careful work

Read what affects the cost and what customers say.

Surface by surface

Bathroom floors

New floor grout makes a big difference to how a bathroom looks. Floor-to-wall and bath joints are sealed, not grouted.

Shower walls

The grout in a shower takes the brunt of the water. We replace it and renew the silicone at the edges.

For landlords and businesses

We work for landlords and letting agents as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order.

We also work for property managers and facilities teams. Several sites can go on one quote.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job