Hampshire · England
Gutter, fascia & soffit sealing in Hollywater, Hampshire
Problem with your gutter and fascia joints in Hollywater? We remove the old material, prepare the joints and seal them properly.
- Internal damp traced to a gutter joint
- Water dripping where gutter sections meet
- Gaps along fascia and soffit joints
Landlord and commercial work in Hollywater
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
About our gutter sealing in Hollywater
A drip at a gutter joint is easy to ignore, but the water lands on the same spot every time it rains. Sealing it is quick if the gutter is otherwise in good order. We work on uPVC fascias, gutter joints and gutter end caps, and people most often call us about rain getting in around a garage door and leaking gutter joints and stop ends.
In a village or hamlet like Hollywater, older cottages and farm buildings often stand in the open, so walls and rooflines take the full force of wind and rain. Gutter joints and wall joints there need a sealant that can flex and stay put.
The work is covered for a year after we finish. If anything is not right with it, call 0345 464 0079 or send us an email.
- Location
- Hollywater (GU35)
- Region
- Hampshire
- Guarantee
- A year, on every job
- Quotes
- A clear price before we start
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Hollywater questions
Is Hollywater within the area you cover?
Yes. Hollywater is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you help a landlord with a rental near Liphook station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can ring 0345 464 0079 or send us an email with the details for a clear quote.
Can a leaking gutter joint be sealed?
Yes, as long as the gutter itself is in good order. The joint is cleaned and dried first so the sealant bonds.
Is sealant enough for a gutter that has dropped?
Not on its own. If the gutter sags, the joints keep opening, so the brackets need fixing first.
Will there be a smell?
It depends on the product. Some smell for a while, some hardly at all.
Can I do it myself?
That depends on the joint. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
What should I tell you?
A short description and the location, plus pictures if you have them. If we need more, we’ll ask.
Do you hold any approvals?
Yes. Mr Mastic is an ARBOMaster approved applicator.
What we can’t put right
We will always be straight with you, so here’s what sealant can’t fix:
- Sagging gutters or broken brackets
- Cracked, split or warped gutter sections
- Water backing up from a blocked pipe
Not sure which it is? You can call 0345 464 0079 or drop us an email and we’ll tell you honestly.
Joints and surfaces we work on
- Garage door frames
- uPVC fascias
- Roofline trims
- Gutter joints
- Gutter end caps
- Soffit joints
Walls and rooflines in Hollywater
Rainfall in the South East is lower than in much of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
If you live in an older home near St Mark's Sacred Church, old and new materials meet at the roofline and walls, which is where sealant earns its keep. Rented homes near Liphook station change hands often, and leaking gutter joints on a rental are best caught before they stain the walls.
Hollywater is about 6 miles south-east of Alton, in Hampshire. For gutter sealing in and around Hollywater, it’s easy to get a quote: please call 0345 464 0079 or email us. We’re based in Crawley and cover Hampshire. 683 places in Hampshire are on our list. We also work in Portsmouth, around 23 miles away.
Postcode districts we cover here for gutter sealing: GU35. That includes homes and businesses on Hollywater Road and Liphook Road and the roads around them. Other places close to Hollywater include Standford (1 mile north-east), Whitehill (1 mile west), Deadwater (1 mile north), Bordon (1 mile north-west) and Lindford (1 mile north). Larger places within reach include Farnborough (14 miles north), Fleet (12 miles north), Horndean (15 miles south-west), Aldershot (11 miles north), Alton (6 miles north-west) and Petersfield (8 miles south-west).
Near you in Hollywater
Locally, jobs take us to homes and businesses close to Mill Chase Academy, among other places. For rail, the closest station is Liphook station, roughly 3.1 miles south-east of the centre. Other landmarks nearby include The Romany Museum (3.9 miles west) and Chase Community Hospital (0.6 miles north-west). Not far away are Wheeler's Down and Deadwater Valley.
How the job changes by surface
Roofline trims
We seal the trims, not the roof. A roofer deals with the roof itself.
Gutter joints
A gutter joint has to cope with movement and standing water. A dedicated gutter sealant suits them.
Can I do it myself?
The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Other services in Hollywater
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Watch for drips in a downpour
- Glance at the soffit joints now and then
- Keep an eye out for wet patches below a joint
- Make sure downpipes are not blocked
Look at fascia and trim joints when you’re checking the gutters. Splits are easier to seal early.
A drip from a gutter joint will not stop on its own. Water keeps hitting the same part of the wall and that can cause damp inside.
How the visit works
Before we leave, we go over the finished joints with you and explain the cure time. The work normally takes an hour or two for a few joints, longer for a full run, depending on the size of the job. Somewhere like Hollywater needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- First, we find the drip and check the gutter isn’t cracked or sagging.
- The joint or trim is cleaned out and old sealant removed.
- The joint is dried, because sealant will not bond to a wet surface.
- An exterior or gutter sealant is applied to the joint.
- The run is checked and any debris near the joints is cleared.
Before we arrive
- Mention any parking rules near the property
- For indoor joints, keep the area dry beforehand if you can
- Tell us about any previous sealing or DIY attempts
Ask for a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email pictures if that is easy.
Related advice
Signs you need gutter sealing in Hollywater
Sealant laid on a wet or dirty joint fails early. Some quick repairs peel off within a season or two for this reason.
If you can see any of these, it’s time to have the joints looked at:
- Open joints in fascias and soffits
- Earlier gutter repairs that have peeled off
- Wet patches on the wall under a gutter joint
- Rain getting in around a garage door
Schools such as Woodlea Primary School are buildings too, and movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.
Questions to ask before booking
- How long to leave it before use
- Is VAT in the price?
- What product goes in the joint
- The length of the guarantee