Hampshire · England
Deadwater Glazing Silicone
Glazing silicone for conservatories, rooflights, glass panels and shower screens for homeowners, landlords and businesses in Deadwater. Fully insured, ARBOMaster approved and guaranteed for a year.
- Water tracking down the inner face of the glass
- Failed joints on frameless glass
- Water escaping where a screen meets the wall
Why act early in Deadwater
Leaks get worse, not better. Left, water can mark floors, damage plaster and rot timber, so it pays to deal with it early. In an older home around Deadwater, damp from a failed joint can get into timber and plaster, which is far harder to put right than the sealant itself.
What you pay reflects the work, not guesswork. That’s why we ask a few questions first and agree the price before starting.
Why us?
- Sanitary silicone with an anti-fungal additive in wet areas
- Colour picked to suit the job
- ARBOMaster approved applicator
- Experience in homes, commercial sites and hotels
Take a look at what affects the cost and customer reviews.
Glazing silicone in Deadwater
Glazing silicone is a maintenance item. Weather and movement take their toll and cracked joints let water in. Resealing puts that right. We work on conservatory frames, glass-to-glass joints and glass balustrade bases, and people most often call us about cracked silicone between glass panels and conservatory leaks at frame and glazing joints.
In smaller places like Deadwater, homes range from older cottages to newer houses, with windows to match: timber, uPVC and aluminium. The right sealant depends on the frame and on what it sits in.
You get a 12-month guarantee, the same in Deadwater as everywhere else we work.
- Location
- Deadwater (GU35)
- Wider area
- Hampshire
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
What the job involves on each surface
Conservatory frames
Conservatory frame joints are a common source of leaks. We remove the failed sealant and renew it.
Shower screens
A screen’s wall joint and tray joint are where leaks start. Both are resealed with anti-fungal silicone.
Keeping the joints in good condition
Simple care keeps the joints in good condition. We recommend:
- Get a new leak looked at quickly
- Check the gutters above the glazing for debris
- Don’t use a blade near the sealant
- Run a squeegee over the glass when you are done
Gentle products are best near the sealant. Strong solvents can soften or mark it.
If silicone on glass has cracked, water is already getting in. Renewing it early keeps it simple, compared with repairing damaged frames or plaster.
DIY sealant or a professional job?
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Landlord and commercial work in Deadwater
Landlords and letting agents in Deadwater can book us as well as householders. Sealant work between tenants keeps a property looking cared for.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Glazing silicone in Deadwater: local notes
Rainfall in the South East is lower than in much of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
Rented homes near Liphook station change hands often, and a shower screen or conservatory joint that leaks is easier to reseal while the property is empty. Managing a site like Mill Chase Academy? Then the mastic around its windows and doors needs looking after like any other building’s.
Deadwater is about 1 mile east of Bordon, in Hampshire. For glazing silicone in and around Deadwater, please phone 0345 464 0079 or drop us an email for a quick quote. We are based in Crawley and cover Hampshire. Our Hampshire coverage runs to 683 places, Deadwater among them. You can also see our page for Portsmouth, roughly 23 miles from Deadwater.
We work across the GU35 postcode area for glazing silicone. That includes homes and businesses on Alma Road, Varna Road and Rowan Road and the roads around them. If you are just outside Deadwater, we cover Lindford (1 mile north-east), Bordon (1 mile west), Hollywater (1 mile south), Standford (1 mile south-east) and Pinewood Village (1 mile north-west). Larger places within reach include Basingstoke (15 miles north-west), Farnborough (13 miles north), Fleet (11 miles north), Aldershot (10 miles north-east), Alton (6 miles north-west) and Petersfield (8 miles south-west).
Landmarks near Deadwater
In Deadwater, that means homes and buildings near Weyford Nursery and Primary School. The closest station to Deadwater is Liphook station, roughly 3.6 miles south-east of the centre. Nearby you will also find Chase Community Hospital (0.7 miles south-west). For a walk, there’s Deadwater Valley and Selborne Hill.
What we do, step by step
The work is kept neat and contained to the joints we are treating, so you can get on with your day. Expect the work to take a few hours for most jobs, and we tell you how long to leave it before we go. A visit to Deadwater is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- First we agree the joints to be done.
- We cut away the failed silicone.
- The surfaces are cleaned with a suitable solvent.
- New glazing silicone goes in and is finished neatly.
- The joints are checked before we leave.
Preparing for the visit
- Mention if the joints have been sealed before
- Mention any sign-in or site rules at work premises
- Tell us if parking is tricky
Get a quote
To get a quote, call 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You’ll have a clear quote before any work starts.
Advice
Towns and villages near Deadwater
What else we do in Deadwater
Common problems we fix in Deadwater
Glass and frames expand and contract with the temperature, and they don’t move by the same amount. Over years, that movement tears the silicone.
Signs it’s time to call us include:
- Water tracking down the inner face of the glass
- Water escaping where a screen meets the wall
- Conservatory leaks at frame and glazing joints
- Glass-to-glass joints that have split
Homes close to St Mark's Sacred Church include some older properties, and the joint between an old wall and a newer frame is generally the first place rain gets in.
Before booking anyone
- Whether the sealant suits the joint
- When the joint can take water or movement
- What guarantee comes with the work
- How the joint is cleaned and prepared
Questions from Deadwater
Do you work for landlords with property near Liphook station?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can call 0345 464 0079 or email us with the details for a clear quote.
Is Deadwater within the area you cover?
Yes, we do. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Will it make a mess?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
Do I need to be at home?
That depends on where the joints are. Inside work needs someone to give us access, and for outside work we will agree access with you when we book.
Can you match the sealant colour?
Most of the time, yes. We will tell you which colours the right product comes in and agree one before work begins.
What sealant do you use on glazing?
A glazing-grade silicone is best. We use neutral-cure glazing silicone and anti-fungal silicone in wet areas.
What do you need from me for a quote?
Where the job is, what the problem is and roughly how big it is. If you can, email a few pictures.
How long does the job take?
That depends on the amount of work, but most jobs take anything from an hour or two to most of a day, depending on the size of the job. We will give you a better idea when we quote.