Hampshire · England
Regrouting in Deadwater, Hampshire
We cover Deadwater for raking out old, cracked or stained grout and regrouting tiled walls and floors. Old sealant removed completely, joints prepared properly.
- Dirty, worn grout on a tiled floor
- Discoloured grout on otherwise sound tiles
- Cracked or crumbling grout lines
Regrouting in Deadwater
When grout stays dark however much you clean it, the stain is often in the grout itself. New grout is the fix that lasts, and it’s a chance to change the colour too. Typical jobs include gaps where the shower grout has gone and dirty, worn grout on a tiled floor, on tiled floors, shower walls and wet rooms.
Smaller places like Deadwater still have plenty of bathrooms that work hard every day. Older or newer, every room gets the same approach: old sealant or grout cut out, joints cleaned and dried, and a fresh finish laid.
You get a one-year guarantee, the same in Deadwater as everywhere else we work.
- Where
- Deadwater (GU35)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Quote
- A clear price before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
When to call us in Deadwater
Hard water and soap leave a film on grout and stick to it. In time the grout under it darkens and breaks down, which is when replacing it makes sense.
If you can see any of these, it’s time to have the joints looked at:
- Floor grout that won’t come clean
- Greasy, stained grout behind the hob
- Grout in a colour the owner wants to change
- Corners filled with grout instead of silicone
Homes close to St Mark's Sacred Church include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.
Questions to ask before booking
- What insurance they hold
- How long the guarantee is
- How the colour is chosen
- Whether VAT is included
Places near Deadwater
Other services in Deadwater
Different surfaces, different methods
Wet rooms
Regrouting a wet room helps keep water on the surface of the tiles. It doesn’t repair failed tanking underneath.
Bathroom wall tiles
Walls outside the shower get less water but still stain and crack. Regrouting brings them back in line.
Why act early in Deadwater
Cleaning products may brighten grout for a time, but mould that has got into grout normally comes back. Replacing the grout and resealing the edges is a lasting fix. Around Deadwater, water from a failed joint in an older home can soak into timber and plaster, and that is a much bigger job than renewing the sealant.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, along with when we can work on site. Call for a quick quote and we will go through it with you.
Why book with us
- Neat joints and a tidy finish
- Over 20 years’ experience
- Experience in homes, commercial sites and hotels
- Arbo and Everbuild products
Take a look at our cost guide or our reviews.
Bathrooms and kitchens in Deadwater
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For landlords with property near Liphook station, stained grout drags a rental down, and regrouting between lets puts that right. If you look after a building such as Mill Chase Academy, we reseal washrooms and kitchens in schools and businesses as well as homes.
Deadwater is about 1 mile east of Bordon, in Hampshire. Across the GU35 area, we can carry out regrouting at your property. Our area takes in 683 places across Hampshire, large and small. Our Portsmouth page covers work nearby.
Postcode districts we cover here for regrouting: GU35. Whether your property is on Alma Road, Varna Road and Rowan Road or anywhere close by, we can help. Other places close to Deadwater include Lindford (1 mile north-east), Bordon (1 mile west), Hollywater (1 mile south), Standford (1 mile south-east) and Pinewood Village (1 mile north-west). We also work in nearby towns such as Basingstoke (15 miles north-west), Farnborough (13 miles north), Fleet (11 miles north), Aldershot (10 miles north-east), Alton (6 miles north-west) and Petersfield (8 miles south-west).
What’s near Deadwater
Around Deadwater, our work takes us to homes and buildings near Weyford Nursery and Primary School, among other places. For rail, the closest station is Liphook station, about 3.6 miles south-east of the centre. Other landmarks nearby include Chase Community Hospital (0.7 miles south-west). Green spaces nearby include Deadwater Valley and Selborne Hill.
Deadwater: your questions answered
Do you work for landlords with property near Liphook station?
Yes, rental work is part of what we do. You can call 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before work begins.
Can you do regrouting in Deadwater?
Yes, Deadwater is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or email us with a few details of the job, and we’ll give you a clear price.
Where are you based?
Mr Mastic is based in Crawley. Our applicators cover Deadwater.
How long does regrouting take?
It depends on the size of the job, but as a guide it takes anything from a few hours to a full day, depending on the area. We’ll tell you when we quote.
What if some of my tiles are loose?
If tiles are loose, something behind them has generally failed. Regrouting alone isn’t the answer and we will say so before going ahead.
Do you do commercial work?
Yes. Larger jobs can be planned room by room or area by area to suit the site.
What information do you need?
A short description and the location, with photos by email if possible. If we need more, we will ask.
What goes in the corners, grout or silicone?
Corners get silicone, not grout. They flex, and grout there cracks.
Can I do it myself?
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
The process
When we arrive, we look over the joints with you first. Surfaces next to the work are protected before any work begins. Most jobs take anything from a few hours to a full day, depending on the area. In a smaller place like Deadwater, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.
- We agree the area to be regrouted and point out any loose tiles.
- Grout is raked out without chipping the tiles.
- Dust is cleared from every joint.
- We grout the joints and wipe the tiles clean.
- Internal corners and edges are resealed.
Before we arrive
- Mention any leaks or damp you’ve noticed
- Mention any parking rules near the property
- Where the joints are inside, avoid wetting them before we arrive
Getting a quote
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we will explain what’s involved before giving you a price.
Advice
Looking after it afterwards
Good habits help new joints last longer. A few tips:
- Clean grout with a mild bathroom cleaner
- Wipe or squeegee the shower walls
- Rinse the tiles after showering
- Skip wire brushes and scourers
Have any tile that moves checked straight away. A loose tile cracks the grout around it and open a path for water.
Tiles can come away if failed grout is left. Once that happens, regrouting will not fix it, so it’s worth acting early.
What sealant work can’t fix
New sealant can’t fix everything, and we’d rather say so up front. Sealant will not put right:
- A leaking wet room membrane
- A structure that flexes behind the tiles
- Damaged tiles that need replacing
If you are not sure, just ring 0345 464 0079 or email us and we will give you a straight answer.
Joints and surfaces we work on
- Tiled floors
- Bathroom wall tiles
- Bathroom floors
- Kitchen splashbacks
- Shower walls
- Wet rooms