Hampshire · England
Deadwater Floor Joint Sealing
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for Deadwater, backed by a 12-month guarantee. Ask us for a quote.
- Dirt and water collecting in open floor joints
- Concrete floor joints that have broken down
- Tiled floors with no room to move
About our floor joint sealing in Deadwater
Floors move, and the joint where they meet a wall, skirting, threshold or another floor has to move with them. We seal skirting gaps, tiled floor movement joints and concrete floor joints. We work on commercial floors, concrete floor joints and tiled floors, and common reasons people get in touch are gaps between floors and kitchen plinths and skirting caulk that keeps splitting.
In smaller places like Deadwater, new homes tend to come as small developments or single plots. Each still needs its sealant and floor joints finished properly from day one.
You are covered for a year from the day we finish. If there’s a problem with it, please ring 0345 464 0079 or email us.
- Where
- Deadwater (GU35)
- Wider area
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Floor joint sealing in Deadwater: local notes
Floors around Hampshire run from suspended timber in older homes to concrete in newer houses and units, and they don’t all move the same way. That’s why the skirting and threshold joints need a flexible seal.
Letting a property close to Liphook station? Then gaps at skirtings and thresholds are worth sealing between tenancies. For site and facilities teams at buildings such as Mill Chase Academy, floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up. If you look after a church, hall or community building such as St Mark's Sacred Church, floor and skirting joints in halls and kitchens wear like any others.
Deadwater is about 1 mile east of Bordon, in Hampshire. We carry out floor joint sealing for homeowners, landlords and businesses in Deadwater and nearby. Our area takes in 683 places across Hampshire, from the larger towns to small villages. We also work in Portsmouth, about 23 miles from Deadwater.
All of GU35 is covered for floor joint sealing. Whether your property is on Alma Road, Varna Road and Rowan Road or a nearby road, our applicators can take on the job. If you are just outside Deadwater, we cover Lindford (1 mile north-east), Bordon (1 mile west), Hollywater (1 mile south), Standford (1 mile south-east) and Pinewood Village (1 mile north-west). Within a short drive, we also cover Basingstoke (15 miles north-west), Farnborough (13 miles north), Fleet (11 miles north), Aldershot (10 miles north-east), Alton (6 miles north-west) and Petersfield (8 miles south-west).
Landmarks near Deadwater
Around Deadwater, our work takes us to homes and buildings near Weyford Nursery and Primary School and the streets around them. Deadwater’s nearest station is Liphook station, about 3.6 miles south-east. Nearby you will also find Chase Community Hospital (0.7 miles south-west). For a walk, there’s Deadwater Valley and Selborne Hill.
Landlord and commercial work in Deadwater
We work for landlords and agents as well as homeowners. Sealant work between tenants keeps a property looking cared for.
Housing providers, facilities teams and property managers book us too in Deadwater and across Hampshire. We can quote a run of properties together, and we are fully insured for the work.
Different surfaces, different methods
Thresholds
Two different floors meeting at a threshold move differently. We bridge them with a flexible bead.
Wet room and bathroom floors
Bathroom floors meet baths, trays, panels and skirting. They’re sealed with a flexible, anti-fungal silicone that keeps water out.
FAQs for Deadwater
I let a flat near Liphook station. Can you help?
Yes, we work for landlords and agents. Just call 0345 464 0079 or drop us an email and tell us about the property, and we will give you a clear quote.
Do you cover Deadwater for floor joint sealing?
Yes, Deadwater is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or email us with a few details of the job, and we will send you a clear quote.
Do you use a paintable sealant?
If you tell us beforehand, yes. We use a paintable flexible sealant on joints you plan to paint.
Is it worth trying it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
Do you have insurance?
Yes. Full insurance covers our work.
Can you match the sealant colour?
Most of the time, yes. We’ll tell you which colours the right product comes in.
Do you take out the old sealant first?
Always. Sealing over the old bead is the commonest cause of early failure, so we never do it.
How long before the joint can take traffic?
That varies with the sealant and the room. We give you the times for walking, cleaning and traffic when we finish so there’s no guesswork.
What happens if it’s left?
Open joints along wet floors let water into the subfloor and behind skirting. Dealing with it early keeps the repair to the joint. Around Deadwater, water from a failed joint in an older home can soak into timber and plaster, which is far harder to put right than the sealant itself.
What it costs depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before we start, so you know where you stand.
Why Deadwater clients choose us
- White, clear, grey or another colour, product permitting
- Arbo and Everbuild products
- ARBOMaster approved applicator
- A sealant colour to suit the surroundings
Read our cost guide and customer reviews.
Nearby places to Deadwater
What else we do in Deadwater
Keeping the joints in good condition
Looking after new joints is easy:
- Walk round the room once a year and look at the edges
- Avoid sloshing water against skirting
- Mark off resealed joints in warehouses
- Ask before painting over a sealed joint
Mop with a well-wrung mop rather than flooding the floor. Keeping the edges drier helps the sealant last longer.
Sealing a gap while it’s small is a quick job. Ignored, they fill with dirt and open further and are harder to clean out.
What affects the cost of floor joint sealing
Jobs vary more than people expect. The main factors:
- The product the joint needs
- When we can work, for business premises
- Any mould that needs treating
- The number and length of the joints
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.
What to tell us for a quote
You don’t need to know the technical terms. It helps if you can tell us:
- Photos by email, if that is easy
- The problem you’ve noticed
- Whether it’s a home or a business
- The address or postcode of the job
Getting a quote is simple: let us know the job and the location and its rough size. Photos by email help us understand the job.
How the visit works
We bring everything the job needs with us. Once we have agreed what’s being done, the area is protected and the work begins. Most jobs take a few hours for most rooms, longer for large commercial floors. For a job in Deadwater, we agree the time, the access and parking before the day. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- We start by checking the floor, the joint and what traffic it takes.
- We remove what’s in the joint now.
- We vacuum out the joint and add backing where the depth needs setting.
- The chosen sealant goes in, coloured to suit the floor.
- The joint is tooled neatly and the cure time explained.
Preparing for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Keep children and pets away from the work area
- Try not to wet indoor joints just before the visit
How to get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Advice
Honest limits
We won’t take on work that won’t last, so here’s what sealant can’t put right:
- Loose, hollow or cracked tiles, which need a tiler
- Water getting under the tiles from elsewhere
- Cracked or broken concrete slabs
Not sure which it is? You can call 0345 464 0079 or drop us an email and we will tell you honestly.
Where we work in Deadwater
- Thresholds
- Tiled floors
- Skirting boards
- Wet room & bathroom floors
- Commercial floors
- Concrete floor joints