Hampshire · England
Floor Joint Sealing in Bordon
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for householders, landlords and businesses in Bordon. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Open joints that fill with dirt
- Open joints around bathroom floor edges
- Gaps at thresholds between rooms
Floor joint sealing in Bordon, done properly
Tiled floors can crack along the grout when there’s no room for movement. We can turn a line of grout into a movement joint by replacing it with flexible sealant in a matching colour. If you’re dealing with worn sealant at door thresholds and floor edges that trap water and grime, we can put it right.
For a new home in or near Bordon, it’s worth checking the sealant early. Common snags include open skirting joints, lifting shower seals and gaps around frames.
You get a one-year guarantee, the same in Bordon as everywhere else we work.
- Where
- Bordon (GU35)
- Region
- Hampshire
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Leave it or put it right?
Not every floor joint takes the same sealant: skirting and tiled floors need flexibility, wet areas need water resistance and concrete needs a product suited to wheels. Getting that choice wrong is a common reason joints fail. In a smaller place like Bordon, wherever a wall is exposed, a failed outside joint is a real source of damp. Indoors, a failed seal lets water into floors and panels as it would anywhere.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.
Why book with us
- Tidy, careful work
- Sealant colour chosen to suit
- Anti-fungal sanitary silicone in wet areas
- A choice of colours where the product allows
Read our cost guide or customer reviews.
Nearby places to Bordon
Also in Bordon
How to look after the new joints
Looking after new joints is easy:
- Cone off fresh joints until they’re ready
- Avoid caulk in bathrooms and kitchens
- Look at floor joints each spring
- Do not slide heavy items over sealed joints
Lift furniture rather than sliding it over sealed joints. Sharp edges can cut the sealant before it has fully cured.
Concrete joints damaged by traffic get worse quickly. Early resealing helps keep the joint intact and the surface smoother.
Common problems we fix in Bordon
Decorators’ caulk is often used along skirting because it’s cheap and paintable. It cracks where there’s movement or water so the gap reappears.
Look out for these signs:
- Chipped and open joints in warehouse floors
- Cracked caulk along skirting in bathrooms and kitchens
- Dirt and water collecting in open floor joints
- Gaps between floors and kitchen plinths
For landlords with property near Liphook station, a tidy floor and skirting joint helps a rental look ready for the next tenant.
What your quote should include
- What product goes in the joint
- What the cure time is
- Whether VAT is included
- Are they insured?
How it works
At the end, we look at the finished work together and tell you how long to leave it. The visit itself usually takes a few hours for most rooms, longer for large commercial floors, depending on how much there is to do. Parking around Bordon is generally easier than in a town centre, but mention any lanes, gates or long drives. If the job is outside, tell us about side access and how high the joints are.
- The room is cleared along the joints so we can reach them.
- Old material is removed from the joint.
- We clean and dry the edges of the joint.
- A flexible sealant suited to the floor is applied and smooth it.
- Finally, we check the work and talk you through aftercare.
How to prepare
- Mention any sign-in or site rules at work premises
- Mention if the joints have been sealed before
- Clear items away from the joints we are working on
How to get a quote
We don’t publish a price list, because every job is different. Instead, we give you a clear quote for your job. To arrange one, ring 0345 464 0079 or send us an email.
Related advice
Floor joint sealing in Bordon: local notes
Across Hampshire, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. The joint at the skirting or threshold has to allow for that.
Schools such as Bordon Infant School are buildings too, and entrance and corridor floor joints take a lot of traffic. If you look after a church, hall or community building such as St Mark's Sacred Church, joints in its floors, skirtings and thresholds need resealing as they wear.
Bordon is about 10 miles south-west of Aldershot, in Hampshire. Bordon gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. Bordon is one of 683 places in Hampshire we cover. There’s also a page for Portsmouth, about 23 miles away.
Here we cover the GU35 postcode area for floor joint sealing. You will find streets such as High Street, Station Road and Cobbett Square, and we cover them all. Main roads around Bordon include the A325 and B3002, so getting to you is simple. Other places close to Bordon include Pinewood Village (1 mile north), Deadwater (1 mile east), Whitehill (1 mile south), Lindford (1 mile north-east) and Hollywater (1 mile south-east). Larger places within reach include Basingstoke (15 miles north-west), Farnborough (13 miles north), Fleet (11 miles north), Aldershot (10 miles north-east), Alton (5 miles north-west) and Petersfield (8 miles south-west).
Around Bordon
We work in homes and buildings around Mill Chase Academy, among other places. Bordon’s nearest station is Liphook station, roughly 4.1 miles south-east. Nearby you will also find The Romany Museum (3.6 miles west) and Chase Community Hospital (0.6 miles south). Green spaces nearby include Selborne Hill and Deadwater Valley.
Bordon questions
I let a flat near Liphook station. Can you help?
Yes. We work for landlords and agents as well as householders. You can ring 0345 464 0079 or drop us an email with the details for a clear quote.
Can you do floor joint sealing in Bordon?
Yes, Bordon is within the area we cover. We work across London and the South East. Just phone 0345 464 0079 or email us with a few details of the job, and we will send you a clear quote.
Is it worth trying it myself?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Do you have insurance?
Yes. Full insurance covers our work.
Are you an approved applicator?
Yes. Mr Mastic is an ARBOMaster approved applicator.
How long does floor joint sealing take?
That depends on how much there is to do, but most jobs take a few hours for most rooms, longer for large commercial floors. We will give you a better idea when we quote.
When can I walk on the floor?
You will get the times before we go. It depends on the sealant, and walking on it generally comes before mopping or wheeled traffic.
Is caulk good enough for skirting?
Caulk is fine for dry joints that don’t move, but it cracks where there’s movement or water. We use a flexible sealant for most skirting and floor joints.
What the job involves on each surface
Thresholds
Threshold joints get a lot of feet, so the sealant has to be tough as well as flexible and neatly finished.
Commercial floors
Commercial floors take more traffic than most homes. The sealant is chosen for the traffic the floor takes.
For landlords and businesses
If you manage several properties in or around Bordon, jobs at different addresses can go on one quote. Send us the addresses and the work at each, and photos by email help.
Landlords and agents in Bordon can book us as well as homeowners. Resealing between tenancies is a simple way to keep a property in good order before the next move-in.
Should I try it myself first?
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.