Hampshire · England
Bathroom & kitchen resealing in Bordon, Hampshire
Bathroom resealing for Bordon, by sealant specialists with 20+ years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Failed sealant on the screen profile
- Leaks into the floor or ceiling below
- A joint torn by a bath that flexes
Bathroom resealing in Bordon
A shower joint gets soaked every day. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. Each gets a bead of anti-fungal sanitary silicone, finished smooth so water drains away rather than collecting. Typical jobs include black mould in the silicone that won’t clean off and smears of silicone across the tiles, on baths, shower trays & enclosures and sinks & splashbacks.
Even in a smaller place like Bordon, bathrooms and kitchens see heavy daily use. Whether it’s a cottage bathroom or a newer en suite, the approach is the same: old sealant or grout cut out, joints cleaned and dried, and a fresh finish laid.
Whatever the size of the job, it’s backed by our 12-month guarantee.
- Location
- Bordon (GU35)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
For landlords and businesses
We work for letting agents and landlords as well as householders. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
What bathroom resealing looks like in Bordon
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
If you look after a building such as Bordon Infant School, we reseal washrooms and kitchens in schools and businesses as well as homes. Letting a property close to Liphook station? Then a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Bordon is about 10 miles south-west of Aldershot, in Hampshire. Bordon gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Across Hampshire, we cover 683 places, Bordon among them. For nearby work, see our Portsmouth page.
Our applicators cover all of GU35 for bathroom resealing. Streets in the area include High Street, Station Road and Cobbett Square, all of which we cover. Being close to the A325 and B3002, Bordon is easy for our applicators to reach. We also cover the places around Bordon: Pinewood Village (1 mile north), Deadwater (1 mile east), Whitehill (1 mile south), Lindford (1 mile north-east) and Hollywater (1 mile south-east). Within a short drive, we also cover Basingstoke (15 miles north-west), Farnborough (13 miles north), Fleet (11 miles north), Aldershot (10 miles north-east), Alton (5 miles north-west) and Petersfield (8 miles south-west).
Near you in Bordon
Locally, jobs take us to homes and businesses close to Mill Chase Academy. Bordon’s nearest station is Liphook station, roughly 4.1 miles south-east of the centre. Other landmarks nearby include The Romany Museum (3.6 miles west) and Chase Community Hospital (0.6 miles south). The countryside around Bordon includes Selborne Hill and Deadwater Valley.
Bordon questions
Can you help a landlord with a rental near Liphook station?
Yes, we work for letting agents and landlords. You can call 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before any work starts.
Will you come out to Bordon?
Yes, Bordon is covered. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
What should I tell you?
Just the basics: where it is, what you’ve noticed and how we reach it. Then ring 0345 464 0079 or email us.
Where are you based?
Our base is Crawley. Our area covers South East England, London and Scotland.
How long does the new silicone need before I use the shower?
After around 24 hours in most cases. You will get the exact cure time before we leave.
Which products do you use?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice, and we’ll tell you what we are using.
Is white the only colour available?
White, clear and a range of colours are available. On a worktop we colour-match where the joint shows.
Are you ARBOMaster approved?
Yes. We are approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
Keeping the joints in good condition
Simple care keeps the joints in good condition. We recommend:
- Use gentle cleaners on the silicone
- Don’t let bottles sit on the bead
- Give the silicone its full cure time
- Squeegee the walls and tray after use
Give the silicone time to cure before it gets wet, following the cure time we give you. Once it’s cured, wiping it down after use keeps it looking new.
A split bead lets water through every time the bath or shower is used. Over time that water reaches floors, walls and ceilings. Early resealing closes the gap before damage is done.
What affects the cost of bathroom resealing
We quote each job individually. These are the things that affect it:
- When we can work, for business premises
- Whether there’s mould to deal with
- Which sealant suits the joint
- The old material and how stubborn it is
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.
What to tell us for a quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- Whether it has been sealed before
- Where the property is
- If it’s domestic, commercial or a hotel
- Photos by email, if that is easy
Asking for a quote is easy: let us know what needs doing and where. A few pictures by email make the job easier to understand.
Leave it or put it right?
Mould removers can fade the surface of a stained bead, but mould that has grown into the sealant tends to return. Cutting it out and resealing with anti-fungal silicone is the fix that lasts. In a smaller place like Bordon, wherever a wall is exposed, a failed outside joint is a real source of damp. Inside, a split seal lets water into floors and panels just as it would anywhere.
The cost depends on how much there is to do, how hard the old material is to remove and access to the work. You’ll have a clear quote before any work starts.
Why choose Mr Mastic in Bordon
- Rated 4.9 stars on Google
- We agree the colour with you first
- Homes, businesses and hotels
- More than 20 years in sealant work
How it works
On the day, we look over the joints with you first, so there are no surprises. Surfaces next to the work are protected before any work begins. Most jobs take a morning or an afternoon for most single baths and showers. For a job in Bordon, we agree the time, the access and parking before the day. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- We protect the area and cut out all of the old sealant, including the film left on the tiles.
- The joint is cleaned, degreased and treated for mould.
- The joint is left to dry, and baths are filled with water first.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- We clear away and tell you when it can get wet, generally after around 24 hours.
Getting ready for the visit
- Where the joints are inside, avoid wetting them before we arrive
- Keep pets and children clear of the area while we work
- Move anything stored near the joints
How to get a quote
Call for a quick quote, or email us if that’s easier. Tell us about the joints that need doing and we’ll talk you through the work and send you a clear quote.
Read more
Surface by surface
Kitchen worktops & upstands
Laminate worktops swell if water gets into the core. A continuous bead along the back keeps water out.
Sinks & splashbacks
Splashbacks in glass, tile or acrylic meet the worktop in a long joint. We renew it in clear, white or a matched colour.
Do you need bathroom resealing in Bordon?
Sealant laid on a damp, dusty or greasy joint never bonds properly. Traces of soap, bath oil and old sealant stop it gripping, so a rushed job can start to lift early.
Keep an eye out for these signs:
- Failed sealant on the screen profile
- New sealant laid over old sealant that is now lifting
- Black mould in the silicone that won’t clean off
- Water getting behind the kitchen upstand
In the older streets around St Mark's Sacred Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Comparing quotes
- What happens if the job turns out different
- How long the guarantee is
- How much experience the applicator has
- How the joint is cleaned and prepared