Hampshire · England
Deadwater Bathroom Resealing
Professional bathroom resealing in and around Deadwater, with every bit of old sealant taken out first and a 12-month guarantee.
- Shrunken sealant along the back of a worktop
- Cracked, shrunken or lifting silicone
- Lumpy, uneven sealant from a DIY attempt
About our bathroom resealing in Deadwater
Showers work their sealant harder than baths. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. Each gets a bead of anti-fungal sanitary silicone, tooled smooth so water runs off instead of sitting in a ridge. If you are dealing with a reseal done over the top of the old bead and leaking joints on a shower screen, we can help, whatever the surface.
In a smaller place like Deadwater, homes are mostly houses and bungalows rather than flats, some older and some much newer. Bathrooms and kitchens here get the same daily wear as anywhere, and the sealant and grout show it first.
Our work is backed for twelve months, and the guarantee is the same wherever you are.
- Place
- Deadwater (GU35)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
When something else is needed
Some problems need a builder, plumber or other trade rather than us:
- Tiles that have come away from the wall
- A tray that rocks until it’s re-bedded
- Water coming from the plumbing rather than the joint
If in doubt, call 0345 464 0079 or drop us an email and we’ll say what we think before you book.
Surfaces we seal
- Sinks & splashbacks
- Baths
- Shower trays & enclosures
- Wet rooms
- Basins & vanity units
- Kitchen worktops & upstands
Questions from Deadwater
Will you come out to Deadwater?
Yes. Deadwater is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you cover Deadwater for bathroom resealing?
Yes. Our work covers London and the South East, and Deadwater is part of that. Just ring 0345 464 0079 or email us with a few details of the job.
My sealant has gone black. Can you sort it?
Yes. The old sealant comes out, the mould is treated, and we reseal with anti-fungal sanitary silicone.
Are you insured?
Yes. Mr Mastic is fully insured.
Is the work guaranteed?
Yes. All our work comes with a 12-month guarantee.
Do you take out the old sealant first?
Yes. Sealing over the old bead is the commonest cause of early failure, so we never do it.
Will you leave a mess?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
Should I try DIY first?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
Also near Deadwater
Other services in Deadwater
Bathroom resealing in Deadwater: local notes
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
If you look after a building such as Mill Chase Academy, we reseal washrooms and kitchens in schools and businesses as well as homes. In the older streets around St Mark's Sacred Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. For landlords with property near Liphook station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Deadwater is about 1 mile east of Bordon, in Hampshire. Anywhere in GU35, we can carry out bathroom resealing at your property. Across Hampshire, we cover 683 places, Deadwater among them. For nearby work, see our Portsmouth page (23 miles or so).
Postcode districts we cover here for bathroom resealing: GU35. If you need bathroom resealing at a property on Alma Road, Varna Road and Rowan Road or anywhere close by, we can help. Close by, we work in Lindford (1 mile north-east), Bordon (1 mile west), Hollywater (1 mile south), Standford (1 mile south-east) and Pinewood Village (1 mile north-west). Larger places within reach include Basingstoke (15 miles north-west), Farnborough (13 miles north), Fleet (11 miles north), Aldershot (10 miles north-east), Alton (6 miles north-west) and Petersfield (8 miles south-west).
Near you in Deadwater
Around Deadwater, our work takes us to homes and buildings near Weyford Nursery and Primary School, among other places. Deadwater’s nearest station is Liphook station, roughly 3.6 miles south-east. Nearby you will also find Chase Community Hospital (0.7 miles south-west). Green spaces nearby include Deadwater Valley and Selborne Hill.
What we do, step by step
Once we’re on site, we compare the joints with what we discussed. If anything is different, we explain it before carrying on. Most jobs then take around two hours for one bath or shower, longer for a whole bathroom. For a job in Deadwater, we agree the time, the access and parking before the day. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- We look at every joint first and check for movement or leaks.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- The joint is cleaned, degreased and treated for mould.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, normally around 24 hours.
How to prepare
- Tell us about any previous sealing or DIY attempts
- Keep children and pets away from the work area
- Let us know about parking restrictions
Ask for a quote
To get a quote, ring 0345 464 0079 or email us and tell us where the job is and what the problem looks like. We’ll give you a clear quote before any work starts.
Related advice
What affects the cost of bathroom resealing
The quote reflects the job in front of us. We look at:
- How many areas need sealing
- Any working-time requirements on site
- The old material and how stubborn it is
- The type of sealant required
What it costs depends on the size of the job, how hard the old material is to remove and how easy the joints are to reach. You will have a clear quote before any work starts.
What to tell us for a quote
What to tell us when you ask for a quote:
- Roughly how big the job is
- What the problem is, such as mould, gaps, leaks or cracking
- Whether it’s a home or a business
- Where the job is, and your postcode
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved before giving you a price.
Surface by surface
Shower trays & enclosures
Shower trays are sealed to the wall, and enclosures are sealed to the tray and tiles. Both take water every day, so both are resealed with anti-fungal sanitary silicone.
Baths
Acrylic baths flex the most, while steel and cast iron baths move less but still settle when full. Filling the bath first allows for that movement.
Aftercare tips
No joint lasts for ever, but care makes a real difference. A few tips:
- Wait for the cure time we give you
- Run the extractor fan during and after every shower
- Dry worktop joints after washing up
- Look for lifting corners and small gaps now and then
In a kitchen, don’t let water sit along the back of the worktop. A dry joint lasts longer.
A split bead lets water through every time the bath or shower is used. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Early resealing closes the gap before damage is done.
Landlord and commercial work in Deadwater
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
Hotels need rooms back in use, so we plan the work room by room. We have worked in hotels as well as homes and businesses.
Should I try it myself first?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.