Hampshire · England
Fire Rated Sealant in Deadwater
Intumescent and fire-rated sealant around gaps, frames and service penetrations in Deadwater, with a 12-month guarantee on every job. Ask us for a quote.
- Ordinary sealant used where a fire-rated product was needed
- Open gaps behind door architraves
- Linear gaps at the head of walls
How we handle fire rated sealant in Deadwater
Bigger jobs can be worked through in stages, flat by flat or floor by floor, noting the locations and products as we go. It gives you a list to keep with the building’s fire safety documents. We work on flats & HMOs, pipe & cable gaps and linear gaps, and the jobs we see most are gaps where walls meet ceilings or slabs and holes left by a change of layout.
Commercial work around a smaller place like Deadwater generally means a pub, a shop, a school or small business units rather than office blocks. Each needs the same care with its sealant as any larger building.
Whatever the size of the job, it’s backed by our 12-month guarantee.
- Place
- Deadwater (GU35)
- Region
- Hampshire
- Guarantee
- One year on every job
- Quote
- A clear price before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Your questions about fire rated sealant in Deadwater
Can you help a landlord with a rental near Liphook station?
Yes, landlords and agents are among the people we work for. Just phone 0345 464 0079 or send us an email with the address and what needs doing, and we’ll give you a clear quote.
Is Deadwater within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Will there be a smell?
Possibly a little. Any smell clears as the sealant cures.
Is it OK to seal over old sealant?
No. Fresh sealant does not stick to old sealant, and it traps any mould or water underneath. It all has to come out first.
Can you give us a record of the work?
Yes. You get a list of where we worked and what we used for your files.
Will the old sealant be removed?
Yes, every time. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.
Does someone need to be in?
It depends on the job. For work indoors, someone needs to let us in, and for outside work we’ll agree access with you when we book.
Can I choose the sealant colour?
We help you choose a colour that suits. The product needed can limit the range.
Why deal with it now?
Squirting in whichever sealant is nearest doesn’t make a fire seal. Fire-rated products are tested in set gap sizes, depths and substrates, which is why we match the product and the method to each gap. In a smaller place like Deadwater, wherever a wall is exposed, a failed outside joint is a real source of damp. Indoors, a failed seal lets water into floors and panels as it would anywhere.
Combining jobs into one visit normally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. We’ll give you a clear price for the lot.
Why us?
- Trusted Arbo and Everbuild sealants
- Anti-fungal sanitary silicone in wet areas
- Rated 4.9 stars on Google
- ARBOMaster approved applicator
Take a look at what affects the cost and what customers say.
When something else is needed
Some problems need a builder, plumber or other trade rather than us:
- Assessing a building’s fire safety
- Large holes that need a different fire-stopping system
- Problems with the door itself rather than the gap around the frame
If you’re not sure, just ring 0345 464 0079 or send us an email and we will give you a straight answer before you book.
Surfaces we seal
- Pipe & cable gaps
- Door frames
- Service penetrations
- Plasterboard & masonry
- Flats & HMOs
- Linear gaps
Surface by surface
Linear gaps
Gaps along the top of partitions are easy to miss above a ceiling. We work along the whole run.
Plasterboard walls
Service holes in plasterboard are often rough and oversized. Where a hole is bigger than the sealant’s tested range, it needs another approach and we will flag it.
Places near Deadwater
Also in Deadwater
How the visit works
When we get to you, we check the joints match what you told us. If anything is different, we explain it before carrying on. After that, the work takes from a few hours to a few days, depending on the number of gaps and the access. Parking around Deadwater is usually easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Any non-fire-rated filler is removed and the gap cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- Every location is recorded with the product used for your records.
How to prepare
- Where the joints are inside, avoid wetting them before we arrive
- Keep children and pets away from the work area
- Tell us about any water getting in
Get a quote
Getting a quote is simple: let us know what needs doing and where, and roughly how big it is. Photos by email help us understand the job, and we will come back to you with a quote.
Advice
How we quote for fire rated sealant
Every job gets its own quote. This is what makes a difference:
- Whether the work is at height
- The number of rooms or windows
- Mould in or behind the old joints
- Which sealant suits the joint
Commercial jobs are quoted on the same basis as homes: the amount of work, how we reach it and what it needs, plus any working-time requirements on site. Ask us for a quote and we will explain what it covers.
What we need to know
Photos by email are helpful but not essential. Try to tell us:
- Any access issues, like height or stairs
- Where the job is, and your postcode
- If someone has resealed it before
- What the problem is, such as mould, gaps, leaks or cracking
To get a quote, phone 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. You will have a clear quote before we start.
Aftercare tips
How long the joints last depends on use and care. We suggest:
- Photograph sealed gaps before they’re covered up
- Tell trades working in the building that fire seals must be put back
- Look in service cupboards and ceiling voids from time to time
- Plan fire stopping into any work that goes through walls or floors
Keep the record we give you with the building’s fire safety documents. It helps whoever checks the building next.
An open gap isn’t only a fire issue: noise, draughts and even pests can come through too. Dealing with them early helps with all of these.
Landlord and commercial work in Deadwater
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we’ll quote.
For anyone letting property in or around Deadwater, several properties can be quoted together. Send us the addresses and the work at each.
Fire rated sealant in Deadwater: local notes
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
Letting a property close to Liphook station? Then fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through. Schools such as Mill Chase Academy are buildings too, and service openings in fire-resisting walls need checking after any refurbishment. Community buildings like St Mark's Sacred Church are part of the picture too: gaps around pipes and cables are worth checking after any building work there.
Deadwater is about 1 mile east of Bordon, in Hampshire. If you need fire rated sealant in Deadwater, it’s easy to get a quote: please ring 0345 464 0079 or send us an email. We’re based in Crawley and cover Hampshire, Deadwater included. Across Hampshire, we cover 683 places, Deadwater among them. Portsmouth is on our list too, around 23 miles away.
Here we cover the GU35 postcode area for fire rated sealant. Streets in the area include Alma Road, Varna Road and Rowan Road. Close by, we work in Lindford (1 mile north-east), Bordon (1 mile west), Hollywater (1 mile south), Standford (1 mile south-east) and Pinewood Village (1 mile north-west). Within a short drive, we also cover Basingstoke (15 miles north-west), Farnborough (13 miles north), Fleet (11 miles north), Aldershot (10 miles north-east), Alton (6 miles north-west) and Petersfield (8 miles south-west).
What’s near Deadwater
In Deadwater, that means homes and buildings near Weyford Nursery and Primary School and the streets around them. For rail, the closest station is Liphook station, about 3.6 miles south-east of the centre. Nearby you will also find Chase Community Hospital (0.7 miles south-west). Open spaces near Deadwater include Deadwater Valley and Selborne Hill.