Hampshire · England
Pinewood Village Fire Rated Sealant
Problem with your fire-stopping gaps in Pinewood Village? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.
- Open joints along the top of partitions
- Open holes round services passing through fire walls
- Gaps flagged on a fire risk assessment
About our fire rated sealant in Pinewood Village
Bigger jobs can be worked through in stages, flat by flat or floor by floor, noting the locations and products as we go. It gives you a list to keep with the building’s fire safety documents. Common call-outs are for fire seals that have cracked with movement and new service routes left unsealed after building work, across plasterboard & masonry, door frames and linear gaps.
Commercial work around a smaller place like Pinewood Village usually means a pub, a shop, a school or small business units rather than office blocks. The work is the same as in a big building, just on a smaller scale.
Whatever the size of the job, it’s backed by our 12-month guarantee in Pinewood Village and across Hampshire.
- Place
- Pinewood Village (GU35)
- Region
- Hampshire
- Cover
- One year on every job
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
What we can’t put right
New sealant cannot fix everything, and we’d rather say so up front. It won’t solve:
- Assessing a building’s fire safety
- Issuing a fire rating or certificate for a building
- Fire doors that need new seals, closers or hardware
If you are not sure, just call 0345 464 0079 or email us and we will give you a straight answer.
Where we work in Pinewood Village
- Flats & HMOs
- Door frames
- Linear gaps
- Service penetrations
- Plasterboard & masonry
- Pipe & cable gaps
Why deal with it now?
For some gaps, sealant isn’t the right answer and another system is needed. Big openings, bundles of cables and plastic pipes may need batts, collars or wraps instead. If a gap is not suitable for sealant, we’ll tell you. Around Pinewood Village, water from a failed joint in an older home can soak into timber and plaster, which is far harder to put right than the sealant itself.
The cost depends on the size of the job, how much old material has to come out and access to the work. We give a clear quote before work begins.
What you get with us
- Quality sealants from Arbo and Everbuild
- Neat joints and a tidy finish
- Anti-fungal sanitary silicone in wet areas
- 12-month guarantee on every job
Take a look at our cost guide or our reviews.
Surface by surface
Masonry and concrete
For masonry and concrete, we use a product tested in that substrate. The gap is cleaned of dust first so the sealant bonds.
Linear gaps
A linear joint may need to allow for movement as well as fire. The product and depth are chosen to suit both from the manufacturer’s details.
Other services in Pinewood Village
Pinewood Village: your questions answered
Do you cover Pinewood Village for fire rated sealant?
Yes. We work across London and the South East, and Pinewood Village is part of that. You can call 0345 464 0079 or send us an email and tell us what needs doing.
Can you help a landlord with a rental near Bentley (Hampshire) station?
Yes, we work for landlords and letting agents. You can phone 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before we start.
Do you provide details of the products used?
Yes. Every gap we seal is listed with the product used.
Can you quote for more than one area?
Yes. Tell us about everything you’d like done.
Will there be a smell?
Possibly a little. Any smell clears as the sealant cures.
Will you leave a mess?
No. The area is protected while we work and cleaned up afterwards.
How much does fire rated sealant cost in Pinewood Village?
The cost depends on the size of the job, access and how much old sealant has to come out. Call for a quick quote and we will talk you through it.
Are you insured?
Yes. We are fully insured for domestic and commercial work.
DIY versus a professional finish
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
What affects the cost of fire rated sealant
Every job gets its own quote. This is what makes a difference:
- The number of rooms or windows
- The size of the job
- The old material and how stubborn it is
- How easy the joints are to reach
There are no prices on our website, because each job is priced on what it involves. Call for a quick quote.
What we need to know
Before you ask for a quote, have a think about:
- The rough size of the job
- If someone has resealed it before
- A few photos by email, if you can
- Any access issues, like height or stairs
For a quote, ring 0345 464 0079 or send us an email and tell us where the job is and what the problem looks like. You’ll have a clear quote before we start.
Looking after it afterwards
Good habits help new joints last longer. Our tips:
- Look in service cupboards and ceiling voids from time to time
- Tell trades working in the building that fire seals must be put back
- Ask which product was used before you paint
- Allow for resealing whenever new services are run
Follow the cure time we give you before decorating over the sealant. Not every fire-rated sealant takes paint.
Any job that breaks through a wall or ceiling should include resealing. Catching it then saves a separate visit later.
The process
A visit follows a simple pattern: we look at the joints together, protect the area around them, carry out the job and clear up. It usually takes a few hours for a handful of gaps, and longer for a whole building. A visit to Pinewood Village is planned like any other: the time, the access and where to park are agreed in advance. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- We plan the order of work and access, floor by floor or flat by flat.
- Old, damaged or unsuitable sealant is removed.
- Dust and loose debris are cleaned from each gap.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
How to prepare
- Try not to wet indoor joints just before the visit
- Tell us if parking is tricky
- Keep children and pets away from the work area
Getting a quote
Getting a quote is simple: let us know what needs doing and where, and roughly how big it is. A few photos by email make the job easier to understand.
Advice
What fire rated sealant looks like in Pinewood Village
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you let a flat or house near Bentley (Hampshire) station, any gap left by new services in shared walls should be closed with a fire-rated product. Community buildings like St Mark's Sacred Church are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building. If you look after a building such as Bordon Junior School, gaps opened by contractors for new cabling are a common finding in schools and offices.
Pinewood Village is about 5 miles east of Alton, in Hampshire. If you need fire rated sealant in Pinewood Village, please phone 0345 464 0079 or email us for a quick quote. We cover Hampshire from our Crawley base. Our area takes in 683 places across Hampshire, from the larger towns to small villages. There’s also a page for Reading, roughly 23 miles from Pinewood Village.
Work in GU35 is quoted and booked the same way as anywhere else. That includes homes and businesses on Camp Road, Budds Lane and Oakley Road. Other places close to Pinewood Village include Bordon (1 mile south), Lindford (1 mile east), Deadwater (1 mile south-east), Sleaford (1 mile north) and Whitehill (1 mile south). Larger places within reach include Basingstoke (14 miles north-west), Farnborough (13 miles north), Fleet (11 miles north), Aldershot (10 miles north-east), Alton (5 miles west) and Petersfield (9 miles south).
Near you in Pinewood Village
In Pinewood Village, that means homes and buildings near Mill Chase Academy and the streets around them. The closest station to Pinewood Village is Bentley (Hampshire) station, about 4.1 miles north. A little further out are The Romany Museum (3.8 miles south-west) and Chase Community Hospital (1.1 miles south). Open spaces near Pinewood Village include Deadwater Valley and Selborne Hill.