Hampshire · England
Kingsley Fire Rated Sealant
Fire rated sealant for Kingsley and the surrounding area: careful preparation, the right product and tidy work. Ask us for a quick quote.
- Open holes round services passing through fire walls
- Standard silicone or caulk in a fire-stopping gap
- Sealant items on a fire risk assessment action list
Fire rated sealant in Kingsley, done properly
Later work by other trades often breaks through fire stopping, especially in flats, HMOs, offices and schools. One new cable or pipe can leave a gap that nobody goes back to seal. Those are the gaps we close, using a tested fire-rated product. Typical jobs include holes left by a change of layout and fire stopping disturbed by later work, on door frames, service penetrations and flats & HMOs.
Work in a small place like Kingsley is planned ahead, journey included, so it can be fitted around guests, clients or events where possible.
We stand behind the work with a 12-month guarantee, so you’re covered after we have gone.
- Location
- Kingsley (GU35)
- Wider area
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- A clear price before work begins
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Landlord and commercial work in Kingsley
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
We also work for property managers and facilities teams in Kingsley and across Hampshire. We can quote a run of properties together, and we are fully insured for the work.
Other services in Kingsley
How it works
You don’t need to clear the whole room or building before we come, only the area right around the joints. We protect the rest, and the job takes anything from a few hours to several days, depending on how many gaps there are in most cases. In a small place like Kingsley, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Any non-fire-rated filler is removed.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products.
Getting ready for the visit
- Mention any leaks or damp you’ve noticed
- Tell us about any previous sealing or DIY attempts
- Try not to wet indoor joints just before the visit
Getting a quote
Quotes start with a quick conversation. Describe the problem, the location and the size of the job. When it suits you, ring 0345 464 0079 or email us.
Read more
What happens if it’s left?
Doing it once, properly, beats doing it twice. If the details weren’t followed, the seal may need redoing when the building is next checked. Around Kingsley, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
Why us?
- Homes, businesses and hotels
- Rated 4.9 stars on Google
- Neat joints and a tidy finish
- Trusted Arbo and Everbuild sealants
Read our cost guide and customer reviews.
Different surfaces, different methods
Masonry and concrete
Masonry is dusty and porous, so preparation matters. The gap is cleaned and backed where required before applying the sealant.
Linear gaps
Head-of-wall gaps are often hidden above suspended ceilings. We seal them along their full length so there are no open sections left.
Keeping the joints in good condition
Simple care keeps the joints in good condition. We recommend:
- Keep the record of products and locations with your fire safety documents
- Don’t fill fire-stopping gaps with ordinary foam or silicone
- Include fire stopping when you schedule refits
- Make resealing part of every contractor’s brief
Leave the sealant to cure fully before painting near it. Some fire-rated sealants can be painted and some cannot and we will tell you which one you have.
When you plan work that goes through walls or ceilings, plan the fire stopping too. Doing it at the time avoids leaving gaps behind.
Should I try it myself first?
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so tell us about it when you ask for a quote.
Your questions about fire rated sealant in Kingsley
Do you cover Kingsley for fire rated sealant?
Yes. Our work covers London and the South East, and Kingsley is part of that. You can phone 0345 464 0079 or drop us an email and let us know what needs doing.
Is Kingsley within the area you cover?
Yes. Kingsley is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you tell me how many minutes the seal will last?
That is not something we state or certify. Your specification sets the requirement, and we fit a product whose tested details meet it, recording the locations and products.
Will there be a smell?
There can be a smell while the sealant cures, which fades as it sets. Opening a window helps.
Is it messy?
No. We work neatly, protect the area around the joints and tidy up afterwards.
Do you provide details of the products used?
Yes. When the job is done, we give you the locations and products. If you need pictures or a set layout, ask when you get a quote.
Do you offer different sealant colours?
Most of the time, yes. We’ll explain which colours are available and agree one before work begins.
Are you an approved applicator?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Commercial buildings in Kingsley
In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, and gaps around services are often picked up there. We apply fire-rated sealant to the assessor’s or designer’s specification and the product’s tested details.
If you look after a church, hall or community building such as Church of All Saints, older buildings that have had new heating or wiring often have service gaps worth checking. Rented homes near Bentley (Hampshire) station change hands often, and new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Kingsley is about 4 miles east of Alton, in Hampshire. If you need fire rated sealant in Kingsley, it’s easy to get a quote: please phone 0345 464 0079 or drop us an email. We are based in Crawley and cover Hampshire, Kingsley included. Kingsley is one of 683 towns and villages in Hampshire we cover for fire rated sealant. For nearby work, see our Reading page (22 miles or so).
We cover every part of the GU35 postcode area for fire rated sealant and the streets around it. We cover properties on Forge Road, Woodfield and Churchfields. Other places close to Kingsley include Sleaford (1 mile east), Pinewood Village (1 mile south), Frithend (2 miles north-east), Bordon (2 miles south) and Lindford (2 miles south-east). Further out, we also cover Basingstoke (13 miles north-west), Farnborough (12 miles north-east), Fleet (10 miles north), Aldershot (9 miles north-east), Alton (4 miles west) and Petersfield (10 miles south).
Around Kingsley
Locally, jobs take us to homes and businesses close to The New Inn. The closest station to Kingsley is Bentley (Hampshire) station, roughly 3 miles north of the centre. Other landmarks nearby include Chase Community Hospital (2.3 miles south). Not far away are Deadwater Valley and Selborne Hill.
Common problems we fix in Kingsley
Buildings are refitted and reconfigured over the years. Conversions to flats and HMOs, and office refits, create new walls and new routes for services, with gaps to match.
Signs it’s time to call us include:
- Holes left by a change of layout
- Seals cut through by electricians, plumbers or data installers
- Unsealed gaps around fire door frames
- Sealant items on a fire risk assessment action list
Schools such as Mill Chase Academy are buildings too, and service openings in fire-resisting walls need checking after any refurbishment.
Comparing quotes
- What the cure time is
- How much experience the applicator has
- Whether the sealant suits the joint
- What happens if they find a problem under the old sealant