Hampshire · England
External & façade joints in Kingsley, Hampshire
Sealing brickwork movement joints, render, cladding and façade joints for householders, landlords and businesses in Kingsley. Fully insured, ARBOMaster approved and guaranteed for a year.
- Water getting into walls through failed joints
- Weeds or debris growing in open joints
- Joints where the bead has come unstuck
External mastic in Kingsley
A movement joint is only as good as its depth. Backing rod controls how deep the sealant goes and keeps it off the back of the joint, so it bonds to the two sides only and can stretch. If you are dealing with weathered mastic that no longer stretches and panel joints letting water in, we can help.
Outside joints can only be sealed when they’re dry, so work in Kingsley is booked around the forecast. Tell us about access to all sides of the building, including outbuildings and garages.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Kingsley (GU35)
- Wider area
- Hampshire
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
What we are called out for in Kingsley
UV, rain and frost all age exterior sealant. Over the years it hardens, cracks on the surface and loses its give, so the joint eventually tears or comes away from one side.
Common reasons people contact us are:
- Failed sealant between panels on a façade
- Joints with sealant missing in places
- Hard, crazed mastic that has stopped moving
- Joints where the bead has come unstuck
For an older house near a landmark such as Church of All Saints, the joints between older walls, newer extensions and the roofline need a sealant that can move.
Comparing quotes
- Whether they’re fully insured
- How long the guarantee is
- What happens if the job turns out different
- Is VAT in the price?
Kingsley: your questions answered
Can you help a landlord with a rental near Bentley (Hampshire) station?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or send us an email and tell us about the property, and we will send you a clear quote.
Will you come out to Kingsley?
Yes. Kingsley is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Why do you put foam in the joint first?
Backing rod goes into deeper joints as a matter of course. It sets the sealant depth and prevents three-sided bonding.
Do I need to be at home?
That depends on where the joints are. Inside work needs someone to give us access.
Why is there a gap in my brick wall?
Walls move with heat, cold and moisture, and planned joints take up that movement. The gap is sealed with a flexible sealant over backing rod.
Are you ARBOMaster approved?
Yes. We hold ARBOMaster approved applicator status and we’re fully insured too.
Do you take out the old sealant first?
Yes, every time. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.
Will you leave a mess?
We keep the work tidy. We protect what’s around the joints, and the area is left clean when we finish.
What else we do in Kingsley
What external mastic looks like in Kingsley
The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
For landlords with property near Bentley (Hampshire) station, failed wall and movement joints let damp in, so they’re worth checking between tenancies. Schools such as Mill Chase Academy are buildings too, and its movement joints, gutters and trims need looking after like any other building’s.
Kingsley is about 4 miles east of Alton, in Hampshire. If you need external mastic in Kingsley, please phone 0345 464 0079 or drop us an email for a quick quote. We’re based in Crawley and cover Hampshire. Kingsley is one of 683 towns and villages in Hampshire we cover for external mastic. We also work in Reading, around 22 miles away.
We work across GU35 for external mastic and the streets around it. We cover properties on Forge Road, Woodfield and Churchfields. Nearby, we also carry out external mastic in Sleaford (1 mile east), Pinewood Village (1 mile south), Frithend (2 miles north-east), Bordon (2 miles south) and Lindford (2 miles south-east). Larger places within reach include Basingstoke (13 miles north-west), Farnborough (12 miles north-east), Fleet (10 miles north), Aldershot (9 miles north-east), Alton (4 miles west) and Petersfield (10 miles south).
Local landmarks in Kingsley
We work in homes and buildings around The New Inn. The closest station to Kingsley is Bentley (Hampshire) station, about 3 miles north of the centre. Nearby you will also find Chase Community Hospital (2.3 miles south). For a walk, there’s Deadwater Valley and Selborne Hill.
How we quote for external mastic
There’s no set price list. What we look at:
- The product the joint needs
- Whether old sealant or filler has to be cut out
- Whether the work is at height
- How much there is to do
Homes and businesses are quoted the same way: the amount of work, the access and the products needed. Ask us for a quote and we’ll go through it with you.
What we need to know
To make quoting easier, please include:
- The rough size of the job
- The problem you’ve noticed
- Where the job is, and your postcode
- Any access issues, like height or stairs
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we will talk you through the work and give you a clear price.
Leave it or put it right?
Water gets in through a failed movement joint and can run behind render or cladding. Dealing with it early keeps the repair to the joint, instead of the wall and finishes around it. Around Kingsley, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
The cost reflects the work involved, not guesswork. That’s why we ask about the job first and give you a clear quote before work begins.
Why us?
- 180+ five-star Google reviews
- We leave the area clean and tidy
- Quality sealants from Arbo and Everbuild
- Old sealant always removed completely
Read our cost guide or our reviews.
Different surfaces, different methods
Concrete and blockwork
The face of concrete or block is often dusty, so preparation is key. We prime where the sealant needs it before sealing.
Render joints
Cracks along render joints let water in behind the coat. Resealing the joints early keeps water out.
For landlords and businesses
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.
We work for landlords and letting agents as well as householders. Resealing between tenancies keeps a property looking cared for.
What we do, step by step
On the day, we start by going over the job with you, so you know exactly what we are doing. We protect the surfaces around the joints before work begins. Most jobs take a few hours for a handful of joints, longer for a whole elevation. Somewhere like Kingsley needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We start by walking round the building and agreeing the joints and the access.
- Every bit of old sealant and any mortar or debris is cut out.
- Joint faces are cleaned back and primed if the sealant needs it.
- Backing rod sized to the joint goes in to set the depth.
- We apply the sealant, tool it and check the whole run.
Getting ready for the visit
- Mention if the joints have been sealed before
- Clear items away from the joints we are working on
- For business premises, tell us about site rules or sign-in
Getting a quote
It all starts with a short chat. Describe the problem, the location and the size of the job. When it suits you, ring 0345 464 0079 or send us an email.
Advice
How to look after the new joints
So the new joints stay in good condition:
- Check external joints each spring
- Show decorators and builders where the movement joints are
- Keep movement joints as flexible joints, not mortar
- Act on the first splits you see
Avoid pressure-washing straight into the joints. High-pressure water can lift the edges and let water in behind.
Water getting behind cladding or render can go unnoticed for a long time. By the time there’s a damp patch, the damage can be well established so early resealing is worth it.