Hampshire · England
Window & door mastic in Pinewood Village, Hampshire
Our applicators work in Pinewood Village on mastic around window and door frames, sills and patio doors. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Draughty joints inside around the window
- Water coming in at the bottom corners of a door
- Draughts coming in around windows and doors
Frames and glazing around Pinewood Village
Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
Rented homes near Bentley (Hampshire) station change hands often, and sound mastic around windows and doors keeps out the draughts and damp that tenants notice first. Homes close to St Mark's Sacred Church include some older properties, and replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint.
Pinewood Village is about 5 miles east of Alton, in Hampshire. We carry out window mastic for homes and businesses in Pinewood Village and nearby, as part of our work across Hampshire. We cover 683 towns and villages across Hampshire. Our Reading page covers work nearby (23 miles or so).
Work in GU35 is quoted and booked the same way as anywhere else. Window mastic is available to properties on Camp Road, Budds Lane and Oakley Road. Neighbouring places we cover for window mastic include Bordon (1 mile south), Lindford (1 mile east), Deadwater (1 mile south-east), Sleaford (1 mile north) and Whitehill (1 mile south). Within a short drive, we also cover Basingstoke (14 miles north-west), Farnborough (13 miles north), Fleet (11 miles north), Aldershot (10 miles north-east), Alton (5 miles west) and Petersfield (9 miles south).
Around Pinewood Village
We work in homes and buildings around Mill Chase Academy. The closest station to Pinewood Village is Bentley (Hampshire) station, roughly 4.1 miles north. Other landmarks nearby include The Romany Museum (3.8 miles south-west) and Chase Community Hospital (1.1 miles south). Green spaces nearby include Deadwater Valley and Selborne Hill.
Window mastic in Pinewood Village
Every window and door frame has a gap around it, and mastic is what closes it. When it cracks, hardens or pulls away, draughts and rain get in. The old mastic is removed and the joint resealed with a flexible exterior sealant. If you have water coming in at the bottom corners of a door and gaps where the sill meets the wall, we can put it right.
Many houses in smaller places like Pinewood Village have conservatories, garden rooms or patio doors. Their glazing joints and frame seals are as much a part of the job as the windows.
A 12-month guarantee comes as standard, so you’re covered after we’ve gone.
- Location
- Pinewood Village (GU35)
- Wider area
- Hampshire
- Cover
- One year on every job
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
What we are called out for in Pinewood Village
Joints that are too thin or too deep fail early. A thin smear across a wide gap has nothing to it, and a gap filled solid cannot flex. That is what backing rod is for.
The problems people usually mention when they call are:
- Cracked sealant at the sill ends
- Rain getting in at the frame or under the sill
- Cracked internal joints between frame and plaster
- Gaps left after new windows were fitted
Schools such as Bordon Junior School are buildings too, and the mastic around its windows and doors needs looking after like any other building’s.
Comparing quotes
- How long to leave it before use
- Whether the sealant suits the joint
- Whether they seal over old material or remove it
- How hidden problems are handled
Pinewood Village questions
Can you help a landlord with a rental near Bentley (Hampshire) station?
Yes, landlords and agents are among the people we work for. You can call 0345 464 0079 or drop us an email with the details for a clear quote.
Do you cover smaller places like Pinewood Village?
Yes, Pinewood Village is covered. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
How do I get a quote for window mastic in Pinewood Village?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
Can you seal the gap between the frame and the plaster indoors?
Yes. Plenty of draughts come through the inside joint as well as the outside, so sealing both is often worthwhile.
Is the work guaranteed?
Yes. Each job is covered for 12 months, inside or out.
Can you reach windows above the ground floor?
Yes, as long as they can be reached safely. Let us know about access when you ask for a quote and we’ll plan for it.
Can you do several jobs on one visit?
Yes. Just list everything you need and you will get one quote.
Do I need to be at home?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
Work for landlords, hotels and businesses
Landlords and letting agents in Pinewood Village can book us as well as homeowners. Resealing between tenancies keeps a property looking cared for before the next move-in.
For anyone letting property in or around Pinewood Village, several properties can be quoted together. Send us the addresses and the work at each, and photos by email help.
Honest limits
Some problems need a builder, plumber or other trade rather than us:
- Worn gaskets, brush seals or a door that has dropped
- Penetrating damp from a failed cavity tray or render
- A failed sealed unit that has misted up
If in doubt, phone 0345 464 0079 or send us an email and we’ll say what we think before booking.
What we seal
- Aluminium frames
- uPVC windows
- Window sills
- Composite doors
- Timber windows & doors
- Patio & French doors
What happens on the day
Good joint work is mostly preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. All told, the work takes anything from an hour or two to a full day, depending on how many frames there are. In a smaller place like Pinewood Village, parking is seldom the issue; lanes, gates and long drives are worth mentioning. For outside work, side access and the height of the joints help us plan.
- First, we go round the frames with you and agree the list.
- We remove the old mastic and clean the frame edge and wall.
- Deep gaps get closed-cell backing rod to set the depth.
- The new sealant goes on in white, brown, anthracite grey, black or clear to suit.
- Every joint is tooled smooth and checked before we leave.
How to prepare
- Plan for the work area to be out of bounds to pets and children
- Mention any parking rules near the property
- For indoor joints, keep the area dry beforehand if you can
Ask for a quote
Every job is quoted individually. Simply phone 0345 464 0079 or email us and describe the job and send photos if you have them.
Advice
What else we do in Pinewood Village
What the job involves on each surface
Patio & French doors
Door frames take knocks and movement every time the doors are used. A flexible sealant copes with that.
Timber windows & doors
Soft or rotten wood cannot be sealed successfully. We will point out any rot we find, as a joiner will need to deal with it.
How we quote for window mastic
There’s no set price list, because no two jobs are the same. What we look at:
- When we can work, for business premises
- The amount of work
- Any mould that needs treating
- Whether the work is at height
Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part, and we’ll explain the quote if you ask.
Helping us quote
To make quoting easier, please include:
- A few photos by email, if you can
- What the problem is, such as mould, gaps, leaks or cracking
- If it’s domestic, commercial or a hotel
- Access, such as stairs, a lift or height
Call for a quick quote, or email us if that’s easier. Describe what needs sealing and we will explain what’s involved before giving you a price.
Can I do it myself?
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.