Hampshire · England
Standford Glazing Silicone
Professional glazing silicone in and around Standford, with old sealant always removed completely.
- Black or yellowed silicone on glass joints
- Silicone pulling away from the glass
- Failed joints on frameless glass
About our glazing silicone in Standford
Cracked, stained or lifting silicone on glass looks poor and can leak. It comes off cleanly, without marking the glass before the new bead goes in. We work on conservatory frames, glass balustrade bases and rooflights, and people most often call us about conservatory leaks at frame and glazing joints and sealant that was laid over old silicone and failed.
Outdoor sealant needs dry, clean surfaces, so work on frames around Standford is planned for dry weather. Tell us about access to every side of the house, including upper-floor windows.
Your job is guaranteed for a year, as with all our work.
- Place
- Standford (GU35)
- Region
- Hampshire
- Cover
- One year on every job
- Quote
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Why deal with it now?
Fixing a leaking screen early protects what’s underneath. A small leak can reach the floor below before it shows. Where a wall is exposed, as many are in small places like Standford, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part.
What you get with us
- A choice of colours where the product allows
- Any old sealant cut out fully, not covered over
- Over 20 years’ experience
- Approved under the ARBOMaster scheme
See what affects the cost and our reviews.
Other services in Standford
What affects the cost of glazing silicone
There’s no set price list, because no two jobs are the same. What we look at:
- Access and height
- How much old sealant there is and how hard it is to remove
- Any working-time requirements on site
- The amount of work
Combining jobs into one visit is generally more efficient than separate visits, so tell us about everything that needs sealing. We’ll send you a clear quote for the lot.
What to tell us for a quote
When you contact us, it’s useful to know:
- Pictures of the joints, sent by email
- Whether it has been sealed before
- How many joints, rooms or windows are involved
- Access, such as stairs, a lift or height
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved and send you a clear quote.
What sealant work can’t fix
We’d rather tell you now than do work that will not last, so here’s what sealant can’t put right:
- Leaks from the roof covering or flashing (a roofer’s job)
- A roof that has moved or dropped
- A broken pane or roof panel
If you are not sure, just call 0345 464 0079 or email us and we will give you a straight answer.
What we seal
- Shower screens
- Glass-to-frame joints
- Conservatory frames
- Glass balustrade bases
- Glass-to-glass joints
- Rooflights
FAQs for Standford
Do you work for landlords with property near Liphook station?
Yes, landlords and agents are among the people we work for. You can ring 0345 464 0079 or send us an email with the details for a clear quote.
Is Standford in your area for glazing silicone?
Yes, Standford is within the area we cover. We work across London and the South East. You can phone 0345 464 0079 or email us and let us know what needs doing.
Are you an approved applicator?
Yes. We hold ARBOMaster approved applicator status.
Why not top up the existing silicone?
New silicone won’t bond to old silicone, so a top-up soon lets water through. The old bead always comes out first.
Where is Mr Mastic based?
Our base is in Crawley, and we work across South East England, London and Scotland.
How long does the job take?
As a guide, most jobs take a few hours, depending on how many joints need doing. Bigger jobs take longer, and we’ll say how long yours will take.
Is the work guaranteed?
Every job comes with our 12-month guarantee.
Is it possible to redo the silicone on a shower screen?
Yes. We cut out the old silicone and reseal the glass-to-wall and glass-to-tray joints.
Standford homes and the weather
The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
If you let a flat or house near Liphook station, leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies. For site and facilities teams at buildings such as Weyford Nursery and Primary School, larger buildings have plenty of frames, and the mastic around each one ages.
Standford is about 7 miles south-east of Alton, in Hampshire. From the centre of Standford to the outskirts, glazing silicone is available for homes and businesses alike. We cover 683 towns and villages across Hampshire, from the larger towns to small villages. We also work in Portsmouth, around 23 miles away.
Postcode districts we cover here for glazing silicone: GU35. Streets in the area include Robin Hood Gardens, Standford Lane and Tulls Lane, and we cover them all. Nearby, we also carry out glazing silicone in Hollywater (1 mile south-west), Deadwater (1 mile north-west), Lindford (1 mile north-west), Headley (1 mile north-east) and Bordon (1 mile north-west). Larger places within reach include Farnborough (13 miles north), Fleet (12 miles north), Aldershot (10 miles north), Alton (7 miles north-west), Petersfield (8 miles south-west) and Hook (13 miles north-west).
What’s near Standford
Locally, jobs take us to homes and businesses close to Mill Chase Academy, among other places. Standford’s nearest station is Liphook station, about 2.9 miles south-east. Other landmarks nearby include Chase Community Hospital (1.1 miles west). The countryside around Standford includes Wheeler's Down and Deadwater Valley.
Signs you need glazing silicone in Standford
Using a sealant not made for glass causes many failures. Not every silicone sticks properly to glass, and acetoxy types can attack some frame materials.
Signs it’s time to call us include:
- Mouldy sealant around glass panels
- Conservatory leaks at frame and glazing joints
- Leaks from the base of a shower screen
- Silicone pulling away from the glass
If you live in an older home near St Mark's Sacred Church, replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint.
Before you book anyone
- What happens if the job turns out different
- How the joint is cleaned and prepared
- What insurance they hold
- The length of the guarantee
What we do, step by step
We work through the job in order: protection first, then preparation, sealing and a tidy-up. Typically it takes anything from an hour or two to most of a day, depending on the size of the job, and the area is left clean. In a small place like Standford, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First, we check where the water gets in.
- We remove the old sealant carefully.
- We clean the glass and frame so the new silicone bonds.
- A neutral-cure glazing silicone is applied and tooled.
- Each joint is checked and, where possible, water-tested.
How to prepare
- Keep children and pets away from the work area
- Clear the area around the work
- Mention any tricky access
Get a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints.
Read more
Can I do it myself?
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
If you’ve already had a go yourself, that’s fine. We cut it out and start again.
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Keep conservatory gutters clear of leaves
- Use a gentle glass cleaner and a soft cloth
- Use gentle products around the joints
- Avoid scraping close to the bead
Follow the cure time we give you before the joints get wet. After that, clean glass with a mild cleaner.
A small conservatory leak soon spreads. Water runs along frames and down walls, so get it looked at when you first see it.