Surrey · England

Send Floor Joint Sealing

Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for householders, landlords and businesses in Send. Fully insured, ARBOMaster approved and guaranteed for a year.

  • Grout cracking in a straight line across a floor
  • Floor edges that trap water and grime
  • Gaps between floors and kitchen plinths

Floor joint sealing in Send

What floor joint sealing looks like in Send

Across Surrey, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. The joint at the skirting or threshold has to allow for that.

Managing a site like Send CofE Primary School? Then entrance and corridor floor joints take a lot of traffic. Rented homes near Clandon station change hands often, and a tidy floor and skirting joint helps a rental look ready for the next tenant.

Send is about 3 miles south-east of Woking, in Surrey. Homes, rented property, offices and hotels in Send can book us for floor joint sealing. Every job comes with our 12-month guarantee. Across Surrey, we cover 395 places, Send among them. Crawley is on our list too, about 19 miles from Send.

Jobs for floor joint sealing in GU23 is quoted and booked the same way as anywhere else. Whether your property is on Sandy Lane, Farm Lane and Sandfields or a nearby road, we can help. Other places close to Send include Send Marsh (1 mile east), Burntcommon (1 mile east), Sutton Green (1 mile south-west), Mayford (2 miles west) and Pyle Hill (2 miles west). Within a short drive, we also cover Guildford (3 miles south-west), Woking (3 miles north-west), Camberley (9 miles west), Epsom (12 miles east), Farnham (13 miles south-west) and Ewell (13 miles east).

Local landmarks in Send

Locally, jobs take us to homes and businesses close to St John the Baptist Catholic Comprehensive School, White Rose Lane and The New Inn. Send’s nearest station is Clandon station, about 2.2 miles south-east. Well-known places in the area include Send and Ripley History Society Museum (1.8 miles east) and Woking Community Hospital (2.1 miles north-west). For a walk, there’s Boldermere Lake and Papercourt Marshes.

Map of Send © OpenStreetMap contributors

Floor joint sealing in Send

Thresholds are where two floors, or a floor and a door, meet. We seal them with a flexible sealant suited to the floor finishes either side in a colour to suit. We work on wet room & bathroom floors, skirting boards and commercial floors, and the jobs we see most are tiled floors with no room to move and rigid edge joints in tiled floors.

Where new homes go up in smaller places like Send, it’s often a small development or a single plot. Each still needs its sealant and floor joints finished properly from day one.

Big or small, it’s backed by our one-year guarantee in Send and across Surrey.

Where
Send (GU23)
Wider area
Surrey
Guarantee
12 months on all our work
Price
Quoted before any work starts
Call
0345 464 0079
Page updated
26 October 2026
Mr Mastic applicators lined up beside the company vans, one holding a sealant gun

What we do, step by step

We work through the job in order: protection first, then preparation, sealing and a tidy-up. For most jobs that takes a few hours, depending on the length of joint. For a job in Send, we agree the time, the access and parking before the day. Outdoor jobs depend on a dry day, since sealant needs a dry surface.

  1. The room is cleared along the joints so we can reach them.
  2. We take out the cracked caulk, grout or old sealant.
  3. Edges are cleaned and dried.
  4. We apply a flexible sealant suited to the floor and tooled.
  5. We check the joints and explain the aftercare.

How to prepare

  • Let us know about parking restrictions
  • Clear the area around the work
  • Tell us about any previous sealing or DIY attempts

How to get a quote

For a quick quote, get us on the phone, or email us if that is easier. Describe what needs sealing and we will talk you through the work.

Get a quick quote

Advice

Do you need floor joint sealing in Send?

New floors settle once they’re in use. Gaps at the edges appear in the first year or so, and rigid fillers crack.

Most people get in touch when they notice something like this:

  • Gaps opening between the floor and skirting
  • Cracked grout where a tiled floor needs a movement joint
  • Concrete floor joints that have broken down
  • Rigid edge joints in tiled floors

If you look after a church, hall or community building such as St William of York, joints in its floors, skirtings and thresholds need resealing as they wear.

What your quote should include

  • Which sealant they’ll use, and why
  • What the cure time is
  • What guarantee comes with the work
  • Whether they seal over old material or remove it

Our hiring checklist

Looking after it afterwards

No joint lasts for ever, but care makes a real difference. A few tips:

  • Keep dirt out of the joints
  • Don’t paint over silicone
  • Keep floor cleaning water to a minimum at the edges
  • Mark off resealed joints in warehouses

Avoid flooding the floor when you clean. Less water at the edges helps the joints last.

Sealing a gap while it’s small is a quick job. Left alone, they collect dirt and widen.

Your questions about floor joint sealing in Send

Can you do floor joint sealing in Send?

Yes, Send is within the area we cover. Our work covers London and the South East. You can ring 0345 464 0079 or send us an email and tell us what needs doing.

Do you work for landlords with property near Clandon station?

Yes. We work for letting agents and landlords as well as homeowners, and several properties can go on one quote. You can phone 0345 464 0079 or send us an email with the details for a clear quote.

Do you seal floor joints in bathrooms and kitchens?

Yes. Floor edges in bathrooms and kitchens get wet at every clean, so we seal them with silicone suited to wet areas.

Do you remove the old sealant?

Yes, always, and completely. New sealant won’t bond properly to old, so the joint is cleaned back first.

How long does floor joint sealing take?

Most jobs take a morning or an afternoon for most homes, including the preparation. Your quote will say how long we expect yours to take.

Is it messy?

Very little: the area around the joints is protected first, and we tidy up before we go.

Can I do it myself?

You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.

Can you match the sealant colour?

We will suggest a colour to suit the surroundings, from white and clear to greys and other shades. The choice depends on the product the joint needs.

Surface by surface

Skirting boards

On painted skirting, we can use a flexible sealant that takes paint. Where water is involved, silicone is the better choice.

Tiled floors

When grout cracks along a straight line, the floor is telling you it needs to move. We rake out that line and seal it if it’s in the right place.

Leave it or put it right?

Dirt builds up in open joints and makes the floor look worn. Sealed joints are easier to keep clean. Around Send, water from a failed joint in an older home can soak into timber and plaster, and that’s a much bigger job than renewing the sealant.

Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference, and we will explain the quote if you ask.

Why us?

  • Old sealant always removed completely
  • Homes, businesses and hotels
  • Colour picked to suit the job
  • A choice of colours where the product allows

See what affects the cost or what customers say.

Landlords, agents and businesses in Send

Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.

Housing providers, facilities teams and property managers book us too. We can quote a run of properties together.

DIY sealant or a professional job?

Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.

The biggest DIY mistake is sealing over old sealant. New silicone will not bond to old, so it lifts and traps water and mould underneath. Everything old must be removed first.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job