Surrey · England
Fire Rated Sealant in Send
Intumescent and fire-rated sealant around gaps, frames and service penetrations in Send, with a one-year guarantee on every job. Ask us for a quote.
- Gaps flagged on a fire risk assessment
- Gaps where walls meet ceilings or slabs
- Gaps around pipes and cables through fire-resisting walls
How we handle fire rated sealant in Send
Bigger jobs can be worked through in stages, flat by flat or floor by floor. It gives you a list to keep with the building’s fire safety documents. Common call-outs are for linear gaps at the head of walls and open gaps behind door architraves, across pipe & cable gaps, service penetrations and plasterboard & masonry.
Commercial work around a smaller place like Send normally means a pub, a shop, a school or small business units rather than office blocks. The work is the same as in a big building, just on a smaller scale.
You are covered for a year from the day we finish. If there’s a problem with it, please phone 0345 464 0079 or email us.
- Place
- Send (GU23)
- Wider area
- Surrey
- Cover
- One year on every job
- Quotes
- A clear price before we start
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Fire rated sealant around Send
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details.
If you let a flat or house near Clandon station, any gap left by new services in shared walls should be closed with a fire-rated product. For site and facilities teams at buildings such as Send CofE Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices. Community buildings like St William of York are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Send is about 3 miles south-east of Woking, in Surrey. For fire rated sealant in and around Send, it’s easy to get a quote: please ring 0345 464 0079 or send us an email. We are based in Crawley and cover Surrey, Send included. Send is one of 395 towns and villages in Surrey where we work for fire rated sealant. Crawley is on our list too, about 19 miles from Send.
We cover every part of the GU23 postcode area for fire rated sealant and the streets around it. Fire rated sealant is available to properties on Sandy Lane, Farm Lane and Sandfields. If you are just outside Send, we cover Send Marsh (1 mile east), Burntcommon (1 mile east), Sutton Green (1 mile south-west), Mayford (2 miles west) and Pyle Hill (2 miles west). Within a short drive, we also cover Guildford (3 miles south-west), Woking (3 miles north-west), Camberley (9 miles west), Epsom (12 miles east), Farnham (13 miles south-west) and Ewell (13 miles east).
Near you in Send
We work in homes and buildings around St John the Baptist Catholic Comprehensive School, White Rose Lane and The New Inn, among other places. The closest station to Send is Clandon station, about 2.2 miles south-east of the centre. Nearby you’ll also find Send and Ripley History Society Museum (1.8 miles east) and Woking Community Hospital (2.1 miles north-west). For a walk, there’s Boldermere Lake and Papercourt Marshes.
What we do, step by step
Before we leave, we go over the finished joints with you. The visit itself usually takes from a few hours to a few days, depending on the number of gaps and the access, depending on the size of the job. Parking around Send is usually easier than in a town centre, but mention any lanes, gates or long drives. For outside work, side access and the height of the joints help us plan.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Anything that isn’t fit for the job comes out, and the gap is cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- Finally, we list where we worked and what we used, for your records.
Preparing for the visit
- Tell us if parking is tricky
- Tell us about any water getting in
- Where the joints are inside, avoid wetting them before we arrive
Get a quote
Need a quote? Please ring 0345 464 0079 or drop us an email and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
Related advice
What we cannot put right
A few problems are outside what sealant work can do:
- Fire doors that need new seals, closers or hardware
- Sign-off of the building, which sits with building control or your assessor
- A wall that isn’t a fire-resisting element to begin with
If in doubt, phone 0345 464 0079 or send us an email and we’ll say what we think before you book.
Joints and surfaces we work on
- Linear gaps
- Plasterboard & masonry
- Flats & HMOs
- Service penetrations
- Pipe & cable gaps
- Door frames
What affects the quote in Send
Call for a quick quote. What matters most is:
- How easy the joints are to reach
- Whether old sealant or filler has to be cut out
- Which sealant suits the joint
- The number and length of the joints
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
What to tell us for a quote
There’s no need for technical detail. It helps if you can tell us:
- What the problem is, such as mould, gaps, leaks or cracking
- If it’s domestic, commercial or a hotel
- Any previous sealing or DIY work
- Any access issues, like height or stairs
Every job is quoted individually. Simply phone 0345 464 0079 or email us and describe the job and send pictures if you have them.
How to look after the new joints
To keep the joints looking good and working properly:
- Do not fill fire-stopping gaps with ordinary foam or silicone
- Check whether a sealant can be painted before decorating over it
- Plan fire stopping into any work that goes through walls or floors
- Keep pictures of seals that will be hidden
Any fire seal that’s cut or drilled needs resealing to its tested detail. If you need new services through a sealed wall, plan the fire stopping as part of the job.
An open gap is not only a fire issue: they also let noise, draughts and sometimes pests through. Sealing them early helps on every front.
FAQs for Send
Can you help a landlord with a rental near Clandon station?
Yes, rental work is part of what we do. Just call 0345 464 0079 or send us an email and tell us about the property, and we’ll send you a clear quote.
Will you come out to Send?
Yes, Send is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
How do I get a quote for fire rated sealant in Send?
Every job is different, so each one gets its own quote. For a quick quote, call 0345 464 0079 or drop us an email with a short description of the job.
Do you carry out fire risk assessments?
No. Your fire risk assessor, designer or building control decides that. We apply fire-rated sealant to the requirements they set.
Do I need to be at home?
That depends on where the joints are. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.
What does intumescent mean?
Intumescent describes a material that swells in heat. Many fire-rated sealants work this way, but not all.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
What fire rating will the seal have?
That isn’t something we state or certify. Your specification sets the requirement, and we fit a product whose tested details meet it, recording the locations and products.
Leave it or put it right?
A quick fill with any sealant to hand isn’t fire stopping. Fire-rated products are tested in set gap sizes, depths and substrates, so both the product and the method matter. Around Send, water from a failed joint in an older home can soak into timber and plaster, and that is a much bigger job than renewing the sealant.
No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all make a difference.
Why Send clients choose us
- Fully insured
- Anti-fungal sanitary silicone in wet areas
- An ARBOMaster approved applicator
- We leave the area clean and tidy
Read how sealant jobs are priced and our reviews.
DIY versus a professional finish
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
Nearby places to Send
Also in Send
For landlords and businesses
For anyone letting property in or around Send, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs, and photos by email help.
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.