Surrey · England
Glazing Silicone in Send
Glazing joints in Send need attention? We remove the old material, prepare the joints and seal them properly.
- Failed joints on frameless glass
- Water running down inside the glass
- Failed sealant around rooflight glass
Glazing silicone for homes and businesses in Send
We renew glazing silicone on conservatories, rooflights and glass panels, as well as frameless shower screens and glass balustrade bases. Each joint is cut out, cleaned and resealed. If you are dealing with failed joints on frameless glass and split or lifting silicone on glass, we can put it right, on glass balustrade bases, conservatory frames and shower screens alike.
In a smaller place like Send, some walls face open ground and catch the full force of the weather. The mastic around frames on those walls tends to age faster.
There’s a 12-month guarantee on every job, whatever its size.
- Location
- Send (GU23)
- Region
- Surrey
- Guarantee
- One year on every job
- Price
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Why act early in Send
A quick bead over the old sealant might stop a drip for a while, but silicone doesn’t stick to silicone and water soon finds its way back. Cutting out and resealing properly lasts. Homes in smaller places like Send can face more weather, and failed outside joints let damp into walls. Indoors, a failed seal lets water into floors and panels as it would anywhere.
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.
Why book with us
- Any old sealant cut out fully, not covered over
- Quality sealants from Arbo and Everbuild
- A 12-month guarantee on all work
- Sealant colour chosen to suit
What we do, step by step
The work is kept neat and contained to the area we’re working on, so you can get on with your day. The job usually takes a few hours, depending on how many joints need doing, and we tell you how long to leave it before we go. In a smaller place like Send, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- We find where water is getting in and check whether it’s a sealant joint.
- We cut out the failed silicone, taking care of the glass and frame.
- Surfaces are cleaned with a solvent suited to glass and the frame.
- New glazing silicone goes in and is tooled to a neat finish.
- We check the joints and, where safe, run water over them.
Preparing for the visit
- Tell us about any previous sealing or DIY attempts
- Tell us about any water getting in
- Clear items away from the joints we’re working on
Ask for a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved and give you a clear price.
Advice
Landlords, agents and businesses in Send
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance.
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
Windows and doors in Send
London and the South East are among the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast. Historic houses like Clandon Park (about 2.9 miles south) are a reminder that the area around Send has older buildings as well as new. Where a home is older, older frames set in brick or stone need a sealant that suits them, and sometimes that is traditional sand mastic.
For an older house near a landmark such as St William of York, replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint. For landlords with property near Clandon station, a shower screen or conservatory joint that leaks is easier to reseal while the property is empty.
Send is about 3 miles south-east of Woking, in Surrey. If you need glazing silicone in Send, please ring 0345 464 0079 or send us an email for a quick quote. We’re based in Crawley and cover Surrey. Send is one of 395 towns and villages in Surrey where we work for glazing silicone. Our Crawley page covers work nearby.
All of GU23 is within our area for glazing silicone. You will find streets such as Sandy Lane, Farm Lane and Sandfields, all of which we cover. We also cover Send Marsh (1 mile east), Burntcommon (1 mile east), Sutton Green (1 mile south-west), Mayford (2 miles west) and Pyle Hill (2 miles west). We also work in nearby towns such as Guildford (3 miles south-west), Woking (3 miles north-west), Camberley (9 miles west), Epsom (12 miles east), Farnham (13 miles south-west) and Ewell (13 miles east).
Around Send
In Send, that means homes and buildings near St John the Baptist Catholic Comprehensive School, White Rose Lane and The New Inn and the streets around them. The closest station to Send is Clandon station, about 2.2 miles south-east. Nearby you’ll also find Send and Ripley History Society Museum (1.8 miles east) and Woking Community Hospital (2.1 miles north-west). Open spaces near Send include Boldermere Lake and Papercourt Marshes.
How the job changes by surface
Glass-to-glass joints
Frameless glass corners and panels are joined with silicone. We reseal with a suitable glazing silicone.
Glass-to-frame joints
Silicone at the glass edge seals it into the frame. When it splits, water can get into the frame.
More services for Send
Keeping the joints in good condition
After the cure time, these simple habits help:
- Don’t use a blade near the sealant
- Keep harsh solvents off the silicone
- Act on drips or damp patches early
- Run a squeegee over the glass when you are done
Use mild cleaners on and around the silicone. Harsh solvents may damage the bead.
Drips or damp near a glazing joint shouldn’t be ignored. It may be sealant, or something else, and we will tell you which.
Do you need glazing silicone in Send?
Shower screen silicone gets wet every day. Mould gets into it and the joint starts to lift.
Signs it’s time to call us include:
- Water getting into a conservatory at the joints
- Silicone pulling away from the glass
- Leaks from the base of a shower screen
- Glass-to-glass joints that have split
Managing a site like Send CofE Primary School? Then its window and door frames need their mastic kept sound, just like a home’s.
Comparing quotes
- Whether they seal over old material or remove it
- How the joint is cleaned and prepared
- How much experience the applicator has
- The length of the guarantee
FAQs for Send
Is Send within the area you cover?
Yes. Send is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you help a landlord with a rental near Clandon station?
Yes, we work for landlords and letting agents. Just call 0345 464 0079 or drop us an email and tell us about the property, and we will give you a clear price.
Do you replace glass?
No, our work is the silicone. Glass and sealed units need a glazier.
Are you an approved applicator?
Yes. We’re an ARBOMaster approved applicator, which is run for the Arbo sealant brand.
How long should I leave it?
Many sealants skin over quickly but take longer to cure fully. We’ll give you the cure time for the product we used before we leave.
Where are you based?
Our base is Crawley. Our area covers South East England, London and Scotland.
Will you leave a mess?
Very little: the area around the joints is protected first, and we tidy up before we go.
Is it enough to run a bead over the old sealant?
Many leaks we see come from exactly that. We remove the old silicone, clean the joint and reseal.
Quotes for glazing silicone in Send
There’s no set price list, because no two jobs are the same. What we look at:
- The number of rooms or windows
- Any working-time requirements on site
- How easy the joints are to reach
- How much old sealant there is and how hard it is to remove
No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part, and we will explain the quote if you ask.
Helping us quote
Before you ask for a quote, have a think about:
- Where the property is
- The problem you’ve noticed
- If someone has resealed it before
- The rough size of the job
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and add photos by email if you can.