Surrey · England
Bathroom Resealing in Send
Bathroom resealing for Send, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- A joint torn by a bath that flexes
- Black mould in the silicone that will not clean off
- Sealant that has split, shrunk or peeled away
Bathroom resealing for homes and businesses in Send
Kitchens need the same care as bathrooms. Worktop upstands, sink edges and splashback joints all take splashes every day, and water that gets into the back edge of a worktop can swell the board. We reseal them with a kitchen-suitable silicone, matched to the worktop where it’s on show. We work on wet rooms, shower trays & enclosures and baths, and people most often call us about cracked, shrunken or lifting silicone and water escaping at the shower enclosure.
Smaller places like Send still have plenty of bathrooms that work hard every day. Whether it’s a cottage bathroom or a newer en suite, the approach is the same: all the old material out, the joint cleaned and dried, then new sealant or grout.
Your job is guaranteed for a year, as with all our work.
- Place
- Send (GU23)
- Region
- Surrey
- Guarantee
- One year on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Surface by surface
Baths
The long joint down the side of a bath is where most leaks start, especially under a shower. It gets one smooth bead of anti-fungal silicone.
Sinks & splashbacks
Water getting under the rim of an inset sink can soak the worktop. Where the sealant around the visible edge has failed, we renew it.
Send: your questions answered
Do you work for landlords with property near Clandon station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can ring 0345 464 0079 or drop us an email with the details for a clear quote.
Is Send within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you reseal around my kitchen sink and worktop?
Yes. Worktops, sinks and splashbacks are all part of the job, in a kitchen-suitable sealant, matched to the worktop where it’s on show.
Where do you work from?
We are a Crawley-based firm, with over 20 years’ experience. We work across South East England, London and Scotland.
What colours of sealant can you use?
White and clear are the most common choices, but other colours can be used to suit tiles and worktops. Let us know your preference when you ask for a quote.
Which products do you use?
Products from Arbo and Everbuild, among others, picked for each joint. We’ll tell you what we’re using and why.
Is there any odour?
Possibly a little. It fades as the sealant cures.
Do you take out the old sealant first?
Yes, every time. New sealant will not bond properly to old, so any old material comes out before anything new goes in.
Send homes and their sealant
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Schools such as Send CofE Primary School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. Rented homes near Clandon station change hands often, and a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Send is about 3 miles south-east of Woking, in Surrey. Send gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. We cover 395 towns and villages across Surrey, from the larger towns to small villages. We also work in Crawley, around 19 miles away.
Postcode districts we cover here for bathroom resealing: GU23. We cover properties on Sandy Lane, Farm Lane and Sandfields and the roads around them. If you are just outside Send, we cover Send Marsh (1 mile east), Burntcommon (1 mile east), Sutton Green (1 mile south-west), Mayford (2 miles west) and Pyle Hill (2 miles west). Further out, we also cover Guildford (3 miles south-west), Woking (3 miles north-west), Camberley (9 miles west), Epsom (12 miles east), Farnham (13 miles south-west) and Ewell (13 miles east).
Landmarks near Send
We work in homes and buildings around St John the Baptist Catholic Comprehensive School, White Rose Lane and The New Inn. The nearest railway station is Clandon station, about 2.2 miles south-east. A little further out are Send and Ripley History Society Museum (1.8 miles east) and Woking Community Hospital (2.1 miles north-west). Open spaces near Send include Boldermere Lake and Papercourt Marshes.
For landlords and businesses
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
If you manage several properties in or around Send, jobs at different addresses can go on one quote. Send us the addresses and the work at each.
Also in Send
When something else is needed
A few problems are outside what sealant work can do:
- Movement from a bath with loose feet or no proper support
- Damage behind the tiles that needs a tiler
- A leaking waste, trap or valve
Not sure which it is? You can phone 0345 464 0079 or email us and we will tell you honestly.
Where we work in Send
- Shower trays & enclosures
- Basins & vanity units
- Kitchen worktops & upstands
- Sinks & splashbacks
- Wet rooms
- Baths
Why act early in Send
You do not need a new bathroom because the sealant looks bad. Replacing the joint is usually all it takes. If something else is wrong, we’ll tell you. Around Send, water from a failed joint in an older home can soak into timber and plaster, and that’s a much bigger job than renewing the sealant.
Combining jobs into one visit is generally more efficient than separate visits, so it’s worth mentioning everything you’d like done. You will get one clear quote for the whole job.
Why Send clients choose us
- Colour agreed with you before any work starts
- Colour picked to suit the job
- Arbo and Everbuild products
- Anti-fungal silicone where joints get wet
Take a look at our cost guide and customer reviews.
What we do, step by step
Good joint work is mostly preparation, so that is where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it normally takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. A visit to Send is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- We cover the area around the joints we are working on.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
Preparing for the visit
- Plan for the work area to be out of bounds to pets and children
- Mention any parking rules near the property
- Let us know about stairs, lifts or work at height
Ask for a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
Related advice
What we are called out for in Send
Sealant laid on a damp, dusty or greasy joint never bonds properly. Traces of soap, bath oil and old sealant stop it gripping, so a rushed job can start to lift early.
Signs it’s time to call us include:
- Failed sealant on the screen profile
- Water getting behind the bath panel
- A messy, uneven bead from a previous reseal
- Sealant that has split, shrunk or peeled away
If you live in an older home near St William of York, older homes can move a little, which is hard on rigid grout and tired sealant.
Comparing quotes
- How hidden problems are handled
- What preparation is included
- How long to leave it before use
- How the colour is chosen
Can I do it myself?
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.