Surrey · England
Bathroom Resealing in Burntcommon
Baths, showers and worktops in Burntcommon need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Splits where the tray meets the wall
- Lumpy, uneven sealant from a DIY attempt
- Water escaping at the shower enclosure
Honest limits
Sealant isn’t the answer to every problem, and we’d rather say so up front. It won’t solve:
- Loose or hollow tiles, or failed tanking behind them
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- A bath or tray that moves because it isn’t properly supported
If in doubt, phone 0345 464 0079 or drop us an email and we will say what we think before you book.
Where we work in Burntcommon
- Basins & vanity units
- Shower trays & enclosures
- Sinks & splashbacks
- Wet rooms
- Kitchen worktops & upstands
- Baths
How we handle bathroom resealing in Burntcommon
Across Burntcommon, the joints we reseal are the ones that fail in any home: the long edge of the bath, the base of the shower tray, the back of the basin and the line along the worktop. Each one is stripped, cleaned and dried before new silicone goes in. We work on shower trays & enclosures, kitchen worktops & upstands and baths, and the jobs we see most are water getting behind the bath panel and mouldy sealant that has gone black.
Around Burntcommon, it’s houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: everything old comes out before the new sealant or grout goes in.
Every job is covered by our one-year guarantee, wherever you are in Surrey.
- Place
- Burntcommon (GU23)
- Region
- Surrey
- Guarantee
- 12 months on all our work
- Quote
- A clear price before work begins
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
What affects the cost of bathroom resealing
You will get a clear quote before work begins. It’s based on:
- How much old sealant there is and how hard it is to remove
- How easy the joints are to reach
- The number and length of the joints
- Working hours on commercial sites
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. Your quote takes all of that into account.
What to tell us for a quote
To make quoting easier, please include:
- The rough size of the job
- What the problem is, such as mould, gaps, leaks or cracking
- The address or postcode of the job
- If it’s domestic, commercial or a hotel
Call for a quick quote, or email us if that’s easier. Describe what needs sealing and we will talk you through the work before giving you a price.
Bathrooms and kitchens in Burntcommon
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Rented homes near Clandon station change hands often, and mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets. In the older streets around St William of York, older homes can move a little, which is hard on rigid grout and tired sealant.
Burntcommon is about 3 miles south-east of Woking, in Surrey. For bathroom resealing in and around Burntcommon, it’s easy to get a quote: please phone 0345 464 0079 or email us. We’re based in Crawley and cover Surrey. Our area takes in 395 places across Surrey. For nearby work, see our Crawley page (18 miles or so).
All of GU23 is within our area for bathroom resealing, from the main roads to the quietest streets. Whether your property is on Linden Way, Beech Drive and The Copse or anywhere close by, our applicators can take on the job. Nearby, we also carry out bathroom resealing in Send Marsh (1 mile north), Send (1 mile west), West Clandon (1 mile south), Sutton Green (2 miles west) and Burpham (2 miles south-west). Within a short drive, we also cover Guildford (4 miles south-west), Woking (3 miles north-west), Camberley (10 miles west), Epsom (11 miles east), Redhill (15 miles east) and Farnham (13 miles south-west).
What’s near Burntcommon
Around Burntcommon, our work takes us to homes and buildings near Ripley Court School, The Jovial Sailor pub and St John the Baptist Catholic Comprehensive School. The nearest railway station is Clandon station, roughly 1.5 miles south. Nearby you will also find Guildford Castle (4.4 miles south-west) and Send and Ripley History Society Museum (1.2 miles north-east). Open spaces near Burntcommon include St Martha's Hill and Boldermere Lake.
Signs you need bathroom resealing in Burntcommon
Plenty of failed sealant has been laid over the top of older sealant. New silicone won’t bond to old silicone, so it peels, leaks and hides mould behind it.
The most common problems we see are:
- Mouldy sealant that has gone black
- Gaps between the worktop and the wall
- A bead that has pulled away from the tiles
- Failed sealant on the screen profile
If you look after a building such as Send CofE Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Before you book anyone
- How hidden problems are handled
- How long the guarantee is
- Are they insured?
- How long to leave it before use
Burntcommon: your questions answered
Will you come out to Burntcommon?
Yes, we do. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Is Burntcommon in your area for bathroom resealing?
Yes. Our work covers London and the South East, and Burntcommon is part of that. Just phone 0345 464 0079 or send us an email with a few details of the job.
Can you work on commercial sites?
Yes. Hotels, offices and other businesses use us, and we’re fully insured.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure your landlord agrees.
Do you reseal kitchen worktops and sinks too?
Yes, often alongside a bathroom. Where it’s needed by the sink, we use a food-safe sealant.
Does the resealing come with a guarantee?
Yes, a one-year guarantee. Looking after the joint as we suggest helps it last.
What information do you need?
Only a few details: the address or postcode, what’s wrong and any access issues. Then phone 0345 464 0079 or send us an email.
My sealant has gone black. Can you sort it?
Yes. Mould inside the bead rarely cleans out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Don’t leave water standing on kitchen joints
- Stick to a soft cloth and a mild cleaner
- Run the extractor fan during and after every shower
- Keep scourers and sharp tools away from the bead
Do not stand bottles along the bead, as they hold water against it. Squeegeeing the walls and tray after use keeps water from sitting on the joint.
A failed kitchen joint is easy to miss. Splashes run behind the back edge and soak into the worktop, and the board underneath can swell. Resealing before that happens protects the worktop.
Why act early in Burntcommon
Mould removers can fade the surface of a stained bead, but where mould is inside the silicone it generally comes back. The lasting answer is to remove the bead and start again. In a small place like Burntcommon, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part.
Why choose Mr Mastic in Burntcommon
- Anti-fungal silicone where joints get wet
- Any old sealant cut out fully, not covered over
- Trusted Arbo and Everbuild sealants
- Every job guaranteed for a year
Take a look at what affects the cost and our reviews.
Towns and villages near Burntcommon
More services for Burntcommon
What happens on the day
The work is kept neat and contained to the joints we are treating, so you can get on with your day. Expect the work to take two to three hours for a typical bath, depending on how much old sealant there is, and we explain the cure time before we leave. For a village or hamlet like Burntcommon, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We start by protecting the area and stripping out the old bead.
- We clean and degrease the joint and treat any mould.
- The joint is left to dry, and baths are filled with water first.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- Finally we tidy up and explain the cure time before we leave.
Getting ready for the visit
- Try not to wet indoor joints just before the visit
- Let us know about stairs, lifts or work at height
- For business premises, tell us about site rules or sign-in
Ask for a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
Read more
Different surfaces, different methods
Wet rooms
Wet rooms rely on sound joints at floor and wall junctions. They’re resealed with anti-fungal sanitary silicone, and our work is on the visible joints only.
Kitchen worktops & upstands
Worktop joints get wet and wiped every day. The new bead is colour-matched where it shows.