Surrey · England
Remedial sealant & repairs in Send, Surrey
Removing failed, mouldy or leaking sealant and putting it right for homeowners, landlords and businesses in Send. Fully insured, ARBOMaster approved and guaranteed for a year.
- Repeat leaks from the same joint
- Caulk or the wrong sealant used in a wet area
- Sealant applied over old sealant that has lifted
About our remedial sealant in Send
Movement and expansion joints fail when the sealant can’t stretch. The old sealant comes out and backing goes in to control the depth, then a flexible sealant matched to the movement goes in. If you are dealing with a shower that leaks however often it’s resealed and gaps opening along the back of the worktop, we can help, whatever the surface.
Around Send, you will mostly find houses and bungalows, some older and some much newer. Sealant and grout wear out here just as they do in a big town.
You get a one-year guarantee, the same in Send as everywhere else we work.
- Location
- Send (GU23)
- Wider area
- Surrey
- Cover
- One year on every job
- Price
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
For landlords and businesses
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
We work for landlords and letting agents as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order.
Honest limits
New sealant can’t fix everything, and we will tell you before work begins. Sealant will not put right:
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
- Failed tanking or loose tiles behind the sealant
- A bath, tray or worktop that moves until it’s properly fixed
If in doubt, ring 0345 464 0079 or email us and we will say what we think before booking.
Surfaces we seal
- Mouldy bath & shower sealant
- Shrunken worktop sealant
- Leaking tray & enclosure joints
- Botched or over-sealed joints
- Failed movement joints
- Expansion joints
Do you need remedial sealant in Send?
Products get mixed up: acrylic caulk in a wet area, a general-purpose sealant on a moving joint, or an acetoxy silicone on natural stone or some metals. None of them last.
The most common problems we see are:
- Floor or wall movement joints that have failed
- Sealant that came away because the surface wasn’t prepared
- Dark patches showing through the sealant
- Kitchen joints letting water behind the worktop
If you look after a building such as Send CofE Primary School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
What your quote should include
- What happens if they find a problem under the old sealant
- What the quote includes, VAT included or not
- What guarantee comes with the work
- Which sealant they’ll use, and why
Why deal with it now?
A failed seal rarely means a new bathroom. When the fittings are sound, stripping and resealing the joints is often enough. If they’re not, we will tell you. Homes in smaller places like Send can face more weather, and failed outside joints let damp into walls. Inside, a split seal lets water into floors and panels just as it would anywhere.
Doing several joints on one visit normally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. We’ll send you a clear quote for the lot.
Why us?
- Rated 4.9 stars on Google
- Sanitary silicone with an anti-fungal additive in wet areas
- We leave the area clean and tidy
- Homes, businesses and hotels
Aftercare tips
No joint lasts for ever, but care makes a real difference. Our tips:
- Get the cause of a repeat leak found before resealing
- Report a tray that rocks or a worktop that lifts
- Run the fan after every shower
- Deal with small splits early
Where we’ve pointed out another fault, have it put right, because the new sealant cannot hold back a problem underneath.
Warning signs: sealant lifting at the ends, a second bead visible on top of the first, black mould under the silicone, or stains below a bathroom. Each one is worth getting looked at.
DIY sealant or a professional job?
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is.
Nearby places to Send
More services for Send
Remedial sealant in Send: local notes
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
If you live in an older home near St William of York, timber floors under older bathrooms flex, so joints need a sealant that moves with them. For landlords with property near Clandon station, failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Send is about 3 miles south-east of Woking, in Surrey. If you need remedial sealant in Send, it’s easy to get a quote: please ring 0345 464 0079 or email us. We are based in Crawley and cover Surrey. Send is one of 395 places in Surrey we cover for remedial sealant. We also work in Crawley, about 19 miles from Send.
Every address in GU23 is within our area for remedial sealant. Local streets include Sandy Lane, Farm Lane and Sandfields. Other places close to Send include Send Marsh (1 mile east), Burntcommon (1 mile east), Sutton Green (1 mile south-west), Mayford (2 miles west) and Pyle Hill (2 miles west). We also work in nearby towns such as Guildford (3 miles south-west), Woking (3 miles north-west), Camberley (9 miles west), Epsom (12 miles east), Farnham (13 miles south-west) and Ewell (13 miles east).
Around Send
Typical jobs here are in homes near St John the Baptist Catholic Comprehensive School, White Rose Lane and The New Inn. The closest station to Send is Clandon station, about 2.2 miles south-east of the centre. Well-known places in the area include Send and Ripley History Society Museum (1.8 miles east) and Woking Community Hospital (2.1 miles north-west). Open spaces near Send include Boldermere Lake and Papercourt Marshes.
How the visit works
When we arrive, we look over the joints with you first. We protect the surfaces around the joints before any work begins. The work generally takes a few hours, depending on how many layers have to come out. In a smaller place like Send, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- Surrounding tiles, trays and frames are protected first.
- Every layer of failed sealant is stripped out.
- We clean and degrease the joint and look for signs of movement or water.
- New sealant goes in once the joint is dry, and is tooled smooth.
- You get the cure time and our view on why the joint failed.
How to prepare
- Tell us about any water getting in
- Clear the area around the work
- Let us know about stairs, lifts or work at height
Getting a quote
Need a quote? Please call 0345 464 0079 or drop us an email and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
Advice
FAQs for Send
Can you help a landlord with a rental near Clandon station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just phone 0345 464 0079 or send us an email with the address and what needs doing, and we will give you a clear price.
Can you do remedial sealant in Send?
Yes, Send is within the area we cover. Our work covers London and the South East. You can call 0345 464 0079 or email us and let us know what needs doing, and we’ll give you a clear quote.
Will the old sealant be removed?
Always. Sealing over old sealant is the main reason resealing fails early, so we never do it.
Is it worth trying it myself?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Do you fix expansion and movement joints?
Yes. If a joint has been filled with mortar or rigid filler, we rake it out where possible, and reseal with a flexible product.
Where are you based?
Our base is in Crawley, West Sussex, and we work across South East England, London and Scotland.
Can you remove old sealant without damaging the bath?
Yes, with care. We cut and lift the old sealant with tools suited to the surface, then clean off the residue. We point out any damage that is already there.
Can I add another job to the visit?
Yes. Several rooms, windows or areas can go on one quote.