Perth and Kinross · Scotland
Fire-rated sealant in Woodside, Perth and Kinross
Intumescent and fire-rated sealant around gaps, frames and service penetrations for Woodside, backed by a 12-month guarantee. Ask us for a quote.
- Unsealed gaps around fire door frames
- Unsealed gaps where pipes and cables go through a wall
- Gaps flagged on a fire risk assessment
The process
You do not need to clear the whole room or building before we come, only the area right around the joints. We protect the rest, and the job takes from a few hours to a few days, depending on the number of gaps and the access in most cases. For a place like Woodside, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- Access to each area is agreed so the work can run in order.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- We record what was done and flag anything that needs a different system.
How to prepare
- Let us know about earlier repairs to the joints
- Let us know about stairs, lifts or work at height
- For indoor joints, keep the area dry beforehand if you can
How to get a quote
For a quote, email us at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You’ll have a clear quote before we start.
Advice
About our fire rated sealant in Woodside
Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. We apply intumescent and fire-rated sealants to the manufacturer’s tested details for each gap, with a record of the products and locations if you need one. If you have standard silicone or caulk in a fire-stopping gap and open gaps behind door architraves, we can put it right, whatever the surface.
Work in a place like Woodside is planned ahead, journey included, so the job can fit around guests, residents or opening hours where possible.
The work is covered for a year after we finish. If there’s a problem with it, please drop us a line at info@mrmastic.co.uk.
- Place
- Woodside (PH13)
- Region
- Perth and Kinross
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
What we cannot put right
A few problems are outside what sealant work can do:
- Walls or floors that weren’t built to resist fire
- Big openings where sealant alone isn’t the tested solution
- Deciding what fire stopping a building needs
If in doubt, drop us a line at info@mrmastic.co.uk and we will say what we think before you book.
What we seal
- Flats & HMOs
- Service penetrations
- Linear gaps
- Door frames
- Plasterboard & masonry
- Pipe & cable gaps
When to call us in Woodside
Door frames are a common weak spot. The gap between the frame and the wall is hidden behind the architrave, so it can be left open when a door is replaced.
Any of these means the joints need attention:
- New service routes left unsealed after building work
- Damaged fire sealant left by other trades
- Gaps filled with a product that is not fire-rated
- Unsealed gaps where pipes and cables go through a wall
For jobs in and around Woodside, choosing the right material for each joint is as important as a tidy finish.
What to look for in a quote
- How long the guarantee is
- Who does the work, and how experienced they are
- What product goes in the joint
- Is the old sealant removed completely?
Your questions about fire rated sealant in Woodside
Do you cover smaller places like Woodside?
Yes. Woodside is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Just mention lanes, gates or anything else about the route when you book.
How do Scotland’s building regulations apply to fire-rated sealant in Woodside?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant has to go in to the product’s tested details, and we follow them. We do not certify buildings or do fire risk assessments; your assessor or building control can tell you what’s required.
Can you fill the gap behind a fire door frame?
Yes, where the gap suits a sealant detail. Our work is the gap around the frame.
Do you hold any approvals?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Can new sealant go over the old?
No. Fresh sealant doesn’t stick to old sealant, and it traps any mould or water underneath. We remove it all first.
Will there be a smell?
There can be a smell while the sealant cures, which fades as it sets. Opening a window helps.
Which products do you use?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice, and we’ll tell you what we’re using.
Where are you based?
Our base is Crawley, with over 20 years’ experience. We work across South East England, London and Scotland.
Landlords, agents and businesses in Woodside
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can be quoted together.
Surface by surface
Door frames
We deal with the gap around the frame, not the door. Doors, seals and closers are for a door specialist and we will mention anything we notice.
Flats and HMOs
In flats and HMOs, the walls and floors between homes and common areas need sealing where services pass through. We work through the gaps on your assessment, flat by flat if needed.
Fire rated sealant around Woodside
In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details; we do not certify buildings or carry out fire risk assessments.
In and around Woodside, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint.
Woodside is about 5 miles south of Blairgowrie and Rattray, in Perth and Kinross. Whether you are in the middle of Woodside or further out, we cover fire rated sealant for every kind of property, from flats and houses to offices and hotels. Woodside is one of 107 places in Perth and Kinross we cover. Dundee is on our list too, about 13 miles from Woodside.
We work across PH13 for fire rated sealant and the streets around it. Local streets include Station Road, Church Road and Main Road. Other places close to Woodside include Burrelton (1 mile south-west), Markethill (2 miles north-east), Coupar Angus (2 miles north-east), Meikleour (3 miles north-west) and Kinrossie (3 miles south). Within a short drive, we also cover Perth (10 miles south-west), Blairgowrie and Rattray (5 miles north), Letham (11 miles south-west), Scone (8 miles south-west), Tulloch (10 miles south-west) and Alyth (7 miles north).
Landmarks near Woodside
Nearby you’ll also find Kinclaven Castle (2.8 miles west) and Blairgowrie Community Hospital (4.7 miles north-west). For a walk, there’s Stormont Loch and Gask Hill.
Places near Woodside
Also in Woodside
Quotes for fire rated sealant in Woodside
Your quote is based on your job. We take into account:
- Whether there’s mould to deal with
- The number and length of the joints
- Whether old sealant or filler has to be cut out
- How easy the joints are to reach
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you are unsure, drop us a line at info@mrmastic.co.uk for an honest opinion and a quote.
Asking for a quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- How we’d reach the joints
- If it’s domestic, commercial or a hotel
- Pictures of the joints, sent by email
- What the problem is, such as mould, gaps, leaks or cracking
Call for a quick quote, or email us if that’s easier. Describe what needs sealing and we’ll talk you through the work and give you a clear quote.
Can I do it myself?
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.