Perth and Kinross · Scotland
Fire-rated sealant in Burrelton, Perth and Kinross
Professional fire rated sealant in and around Burrelton, with old sealant always removed completely and a 12-month guarantee.
- Linear gaps at the head of walls
- Door frames with gaps between frame and wall
- Cracked or shrunken fire-rated sealant
How we handle fire rated sealant in Burrelton
Fire-rated sealant closes the gaps around pipes, cables and frames where they pass through a fire-resisting wall or floor. Each gap is sealed to the product maker’s tested detail for its size and substrate, with a record of the products and locations if you need one. Typical jobs include seals cut through by electricians, plumbers or data installers and new service routes left unsealed after building work, on door frames, service penetrations and plasterboard & masonry.
Work in a place like Burrelton is planned ahead, journey included, so the job can fit around guests, residents or opening hours where possible.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Place
- Burrelton (PH13)
- Wider area
- Perth and Kinross
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Different surfaces, different methods
Plasterboard walls
Service holes in plasterboard are often rough and oversized. Gaps that are too big for sealant alone need a different detail.
Masonry and concrete
For masonry and concrete, we use a product tested in that substrate. We clean out dust and debris before sealing.
Aftercare tips
Good habits help new joints last longer. Our tips:
- Flag any open gap you spot round a pipe or cable
- Include fire stopping when you schedule refits
- Keep the record of products and locations with your fire safety documents
- Tell trades working in the building that fire seals must be put back
Do not add foam, filler or ordinary sealant over a fire seal. Repairs should use a matching fire-rated product. We can tell you which product we used.
If a fire risk assessment has flagged a gap, do not leave it for the next one. Get it sealed and recorded.
What we do, step by step
We keep the work tidy and contained to the area we are working on, so you can carry on as normal. The job normally takes from a few hours to a few days, depending on the number of gaps and the access. Outdoor work around Burrelton depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.
- We plan the order of work and access, floor by floor or flat by flat.
- Old, damaged or unsuitable sealant is removed.
- Gaps are cleaned of dust and loose material.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- Locations and products are written up and any gaps unsuitable for sealant are flagged.
How to prepare
- For business premises, tell us about site rules or sign-in
- Tell us about any previous sealing or DIY attempts
- Plan for the work area to be out of bounds to pets and children
Getting a quote
If you’re in Burrelton and need fire rated sealant, email us at info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.
Related advice
Can I do it myself?
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
Honest limits
We’d rather tell you now than do work that won’t last, so these are the limits:
- Issuing a fire rating or certificate for a building
- Problems with the door itself rather than the gap around the frame
- A wall that isn’t a fire-resisting element to begin with
If in doubt, drop us a line at info@mrmastic.co.uk and we will say what we think.
Joints and surfaces we work on
- Flats & HMOs
- Plasterboard & masonry
- Door frames
- Linear gaps
- Pipe & cable gaps
- Service penetrations
Burrelton: your questions answered
Is Burrelton in your area for fire rated sealant?
Yes. Our work covers the whole of Scotland, and Burrelton is part of that. You can email us at info@mrmastic.co.uk and tell us what needs doing, and we’ll give you a clear quote.
Will you come out to Burrelton?
Yes. Burrelton is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Do you hold any approvals?
Yes. Mr Mastic is an ARBOMaster approved applicator and we’re fully insured too.
Will it make a mess?
We keep the work tidy. We protect what’s around the joints, and the area is left clean when we finish.
Can you tell me how many minutes the seal will last?
Ratings and certificates are not something we issue. What’s required is set by your assessor or designer, and the product’s tested details show what it achieves.
Which products do you use?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We’ll tell you what we are using and why.
Can new sealant go over the old?
No, it will not last. It can look neat for a few weeks, but the new layer lifts away from the old one. The old sealant has to come out completely.
Do you take on fire stopping in schools and offices?
Yes. We work in flats, HMOs, schools, offices and other commercial buildings, including occupied ones. We agree access and the order of work with you first.
What affects the cost of fire rated sealant
Every job gets its own quote. This is what makes a difference:
- The product the joint needs
- The number and length of the joints
- Any working-time requirements on site
- The number of rooms or windows
What it costs depends on the amount of work, how hard the old material is to remove and access to the work. You’ll have a clear quote before any work starts, so you know where you stand.
What we need to know
When you call or email, it’s useful to know:
- What the problem is, such as mould, gaps, leaks or cracking
- If it’s domestic, commercial or a hotel
- Access, such as stairs, a lift or height
- Roughly how big the job is
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. When it suits you, drop us a line at info@mrmastic.co.uk.
Work for landlords, hotels and businesses
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. We can quote for more than one property at once.
In hotels, rooms out of use cost money, so we plan the work room by room. Hotel work is part of what we do, alongside homes and businesses.
Fire rated sealant in Burrelton: local notes
In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we don’t certify buildings or do fire risk assessments.
Around Burrelton, as everywhere, fire rated sealant is only as good as the preparation behind it. For jobs in and around Burrelton, choosing the right material for each joint is as important as a tidy finish.
Burrelton is about 5 miles south of Blairgowrie and Rattray, in Perth and Kinross. Every kind of property in Burrelton is covered for fire rated sealant, old or new, large or small. Every job comes with our 12-month guarantee. We cover 107 towns and villages across Perth and Kinross. There’s also a page for Dundee, roughly 13 miles from Burrelton.
Postcode districts we cover here for fire rated sealant: PH13. Whether your property is on High Street, South Street and Scott Street or a nearby road, we can help. Close by, we work in Woodside (1 mile north-east), Markethill (2 miles north-east), Coupar Angus (2 miles north-east), Meikleour (3 miles north-west) and Kinrossie (3 miles south). We also work in nearby towns such as Perth (10 miles south-west), Blairgowrie and Rattray (5 miles north), Letham (11 miles south-west), Scone (8 miles south-west), Tulloch (10 miles south-west) and Alyth (8 miles north).
Around Burrelton
Other landmarks nearby include Blairgowrie Community Hospital (4.9 miles north) and Castle Hill (2.6 miles west). For a walk, there’s Gask Hill and Stormont Loch.