Perth and Kinross · Scotland
Meikleour Fire Rated Sealant
Fire rated sealant for Meikleour, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Gaps around pipes and cables through fire-resisting walls
- Linear gaps at the head of walls
- Old fire sealant that has split or come away
Fire rated sealant in Meikleour
Bigger jobs can be worked through in stages, flat by flat or floor by floor, with each location and product recorded. That record is useful for your files and for whoever looks at the building next. Typical jobs include old fire sealant that has split or come away and gaps where walls meet ceilings or slabs, across linear gaps, service penetrations and pipe & cable gaps.
Work in a place like Meikleour is planned ahead, journey included, so the job can fit around guests, residents or opening hours where possible.
A 12-month guarantee comes as standard.
- Location
- Meikleour (PH2)
- Wider area
- Perth and Kinross
- Guarantee
- 12 months on all our work
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
How to look after the new joints
No joint lasts for ever, but care makes a real difference. Our tips:
- Plan fire stopping into any work that goes through walls or floors
- Check whether a sealant can be painted before decorating over it
- Don’t fill fire-stopping gaps with ordinary foam or silicone
- Check risers, ceiling voids and cupboards during building checks
Don’t add foam, filler or ordinary sealant over a fire seal. Repairs should use a matching fire-rated product. We can tell you which product we used.
A flagged gap shouldn’t wait for the next assessment. Have it sealed, then keep the record so you can show it was dealt with.
Places near Meikleour
More services for Meikleour
Honest limits
A few problems are outside what sealant work can do:
- Construction that doesn’t provide fire resistance on its own
- Fire doors that need new seals, closers or hardware
- Large holes that need a different fire-stopping system
Not sure which it is? You can send an email to info@mrmastic.co.uk and we will tell you honestly before booking.
Joints and surfaces we work on
- Door frames
- Pipe & cable gaps
- Flats & HMOs
- Linear gaps
- Service penetrations
- Plasterboard & masonry
Meikleour questions
Will you come out to Meikleour?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Do you cover Meikleour for fire rated sealant?
Yes. We work across all of Scotland, and Meikleour is part of that. You can email us at info@mrmastic.co.uk and tell us what needs doing, and we will send you a clear quote.
Can you quote for more than one area?
Yes, and it often makes sense. Combining jobs makes good use of the visit.
What should I tell you?
Tell us what needs doing and where, with photos by email if possible. If we need more, we’ll ask.
Can tenants book the work?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Do I have to be there?
That depends on where the joints are. Inside work needs someone to give us access, and for outside work we’ll agree access with you when we book.
Is the work guaranteed?
Yes. Each job is guaranteed for twelve months, wherever you are.
What’s the difference between intumescent and fire-rated sealant?
Intumescent describes a material that swells in heat. Intumescent sealants are a type of fire-rated sealant.
Fire rated sealant in Meikleour: local notes
In Scotland, building work comes under the Building (Scotland) Regulations and their technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we don’t certify buildings or do fire risk assessments.
Around Meikleour, as everywhere, fire rated sealant is only as good as the preparation behind it.
Meikleour is about 4 miles south of Blairgowrie and Rattray, in Perth and Kinross. We carry out fire rated sealant for homes and businesses in Meikleour and nearby. Meikleour is one of 107 towns and villages in Perth and Kinross where we work for fire rated sealant. There’s also a page for Dundee, about 16 miles away.
Here we cover the PH2 postcode area for fire rated sealant. We cover properties on Mercer Green, Old Military Road and Carsie Road and the roads around them. Close by, we work in Carsie (2 miles north-east), Burrelton (3 miles south-east), Woodside (3 miles south-east), Spittalfield (3 miles west) and Kinloch (3 miles north). Further out, we also cover Perth (10 miles south), Blairgowrie and Rattray (4 miles north), Letham (10 miles south-west), Scone (8 miles south), Tulloch (10 miles south-west) and Alyth (8 miles north-east).
Near you in Meikleour
In Meikleour, that means homes and buildings near Meikleour Hotel. A little further out are Kinclaven Castle (1.1 miles south) and Blairgowrie Community Hospital (3.3 miles north). Not far away are Fingask Loch.
How the job changes by surface
Linear gaps
Gaps along the top of partitions are easy to miss above a ceiling. We work along the whole run.
Service penetrations
New gaps tend to show up where services have been added. We clean out what’s there and reseal to the right depth with backing where the detail needs it.
Do you need fire rated sealant in Meikleour?
Door frames are a common weak spot. The gap between the frame and the wall is hidden behind the architrave, so it can be left open when a door is replaced.
If you can see any of these, it’s time to have the joints looked at:
- Holes left by a change of layout
- Damaged fire sealant left by other trades
- Joints picked up in a fire-stopping survey
- Gaps around pipes and cables through fire-resisting walls
If you look after a church, hall or community building such as Kinclaven Church, older buildings that have had new heating or wiring often have service gaps worth checking.
Comparing quotes
- Which sealant they’ll use, and why
- Whether VAT is included
- What the cure time is
- Whether all the old sealant comes out first
What happens on the day
We bring everything the job needs with us, so you don’t need to buy or prepare anything. Once we have agreed what’s being done, the area is protected and the work begins. It normally takes anything from a few hours to several days, depending on how many gaps there are. Outside jobs in Meikleour need a dry day, because sealant will not bond to a wet joint, so an outdoor job can move if the forecast changes. Indoor work goes ahead whatever the weather.
- Before starting, we go through the specification or action list with you.
- We measure every gap and note what it’s in and what passes through.
- Any non-fire-rated filler is removed and the gap cleaned.
- The specified fire-rated sealant goes in over any backing its detail requires.
- Every location is recorded with the product used for your records.
How to prepare
- Keep pets and children clear of the area while we work
- Mention any leaks or damp you’ve noticed
- For indoor joints, keep the area dry beforehand if you can
Getting a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll explain how we’d tackle it. Whenever you’re ready, send an email to info@mrmastic.co.uk.
Read more
DIY sealant or a professional job?
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
Quotes for fire rated sealant in Meikleour
Some jobs are bigger than they look, and some smaller. The main factors:
- Any mould that needs treating
- The type of sealant required
- Any working-time requirements on site
- How easy the joints are to reach
Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. You will know the price before we begin.
What we need to know
You do not need to know the technical terms. It helps if you can tell us:
- The rough size of the job
- Where the property is
- The type of property
- Photos by email, if that is easy
If you are in Meikleour and need fire rated sealant, send an email to info@mrmastic.co.uk. Tell us what the problem is and where, and you will get a clear quote before work begins.