Highland · Scotland

Whiteface Fire Rated Sealant

Intumescent and fire-rated sealant around gaps, frames and service penetrations for householders, landlords and businesses in Whiteface. ARBOMaster approved applicators, fully insured, with a one-year guarantee.

  • Cracked or shrunken fire-rated sealant
  • Gaps left after a refit or conversion
  • Open joints along the top of partitions

Trusted fire rated sealant in Whiteface

Landlord and commercial work in Whiteface

We regularly work with letting and managing agents. Tell us the address, the job and how access works and we will quote.

Housing providers, facilities teams and property managers book us too. Several sites can go on one quote.

How we handle fire rated sealant in Whiteface

In flats, HMOs, offices and schools, fire stopping is often disturbed by later work. One new cable or pipe can leave a gap that nobody goes back to seal. Those are the gaps we close, using a tested fire-rated product. Typical jobs include open gaps behind door architraves and ordinary sealant used where a fire-rated product was needed, on linear gaps, plasterboard & masonry and door frames.

Commercial work around smaller Scottish places tends to mean hotels, guest houses, schools and halls rather than offices. All of them have washrooms, kitchens and fire-rated joints that need looking after.

There’s a 12-month guarantee on every job, whatever its size.

Where
Whiteface (IV25)
Region
Highland
Cover
One year on every job
Price
A clear price before any work starts
Email
info@mrmastic.co.uk
Page updated
26 October 2026
The Mr Mastic team in navy uniforms in front of three Mr Mastic vans

How the visit works

There’s no need to move everything out, only the area right around the joints. We protect the rest, and the job takes a few hours for a handful of gaps, and longer for a whole building for a typical job. Around Whiteface, distance and access matter more than parking. Tell us how to find the property and how to reach the work.

  1. Access to each area is agreed so the work can run in order.
  2. We take out any damaged or unsuitable sealant.
  3. Dust and loose debris are cleaned from each gap.
  4. We apply and tool the sealant to the product’s tested detail.
  5. We record what was done and flag anything that needs a different system.

How to prepare

  • Tell us about access, such as stairs, a lift or high-level joints
  • For business premises, tell us about site rules or sign-in
  • Where the joints are inside, avoid wetting them before we arrive

Ask for a quote

Call for a quick quote, or email us if that’s easier. Tell us about the joints that need doing and we’ll explain what’s involved before giving you a price.

Get a quick quote

Read more

Should I try it myself first?

If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.

Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.

What sealant work can’t fix

Some problems need a builder, plumber or other trade rather than us:

  • Sign-off of the building, which sits with building control or your assessor
  • Large holes that need a different fire-stopping system
  • A wall that is not a fire-resisting element to begin with

If in doubt, drop us a line at info@mrmastic.co.uk and we will say what we think before you book.

Where we work in Whiteface

  • Linear gaps
  • Service penetrations
  • Flats & HMOs
  • Plasterboard & masonry
  • Pipe & cable gaps
  • Door frames

Common questions in Whiteface

Is Whiteface within the area you cover?

Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.

Is Whiteface in your area for fire rated sealant?

Yes, Whiteface is within the area we cover. We work across all of Scotland. Just drop us a line at info@mrmastic.co.uk with a few details of the job.

Can you work in occupied buildings?

Yes. Occupied flats, HMOs, offices and schools are all fine, with access planned around residents or staff. Out-of-hours work can be arranged.

Can you seal over the old sealant?

No, and we never do. It can look neat for a few weeks, but the new layer lifts away from the old one. Removing the old sealant completely is the only lasting way.

Do you do fire sealant around door frames?

Yes, if the gap is within the product’s tested range. Our work is the gap around the frame and we’ll tell you if we spot problems with the door.

What’s the difference between intumescent and fire-rated sealant?

Intumescent means it swells when heated to help seal the gap. Intumescent sealants are one kind of fire-rated sealant; the right one depends on the gap and what passes through it.

Do you hold any approvals?

Yes. We’re an ARBOMaster approved applicator, which is run for the Arbo sealant brand.

Do you carry out fire risk assessments?

No. Your fire risk assessor, designer or building control decides that. We apply fire-rated sealant to the requirements they set.

Aftercare tips

Joint life depends on how it’s used and looked after. We suggest:

  • Photograph sealed gaps before they’re covered up
  • Don’t paint over fire sealant until it has cured
  • Plan fire stopping into any work that goes through walls or floors
  • Report cracked or damaged seals as soon as you notice them

Do not add foam, filler or ordinary sealant over a fire seal. If it needs repair, use the same type of product. We can tell you which product we used.

Leave a fire-stopping gap open and smoke can move through the building much more easily. Sealing it early is a simple step to take.

Surface by surface

Linear gaps

A linear joint may need to allow for movement as well as fire. The product and depth are chosen to suit both.

Service penetrations

Service penetrations are where new gaps often appear. Old or unsuitable filler comes out before the right sealant goes in.

What affects the cost of fire rated sealant

We quote each job individually. This is what makes a difference:

  • Whether old sealant or filler has to be cut out
  • The product the joint needs
  • How easy the joints are to reach
  • Whether there’s mould to deal with

We don’t show prices on the website, because each job is priced on what it involves. Call for a quick quote.

Helping us quote

A few details help us give you an accurate quote. When you ask for a quote, tell us:

  • If it’s domestic, commercial or a hotel
  • Where the property is
  • Any access issues, like height or stairs
  • The rough size of the job

Want a quote for fire rated sealant? Please email us at info@mrmastic.co.uk with a few details. You’ll know what we plan to do, and what it will cost, before any work begins.

Commercial buildings in Whiteface

For seaside hotels, guest houses and holiday lets around Whiteface, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details, though we don’t certify buildings or do fire risk assessments.

In and around Whiteface, as anywhere, good fire rated sealant starts with a clean, dry, properly prepared joint. For jobs in and around Whiteface, choosing the right material for each joint is as important as a tidy finish.

Whiteface is about 23 miles north-west of Nairn, in Highland. Whether you are in the middle of Whiteface or further out, fire rated sealant is available for homes and businesses alike, from flats and houses to offices and hotels. Whiteface is one of 253 places in Highland we cover.

Jobs for fire rated sealant in IV25 works the same way as everywhere else we cover. With the A949 close by, Whiteface is simple for us to get to for fire rated sealant. We also cover Spinningdale (2 miles west), Edderton (3 miles south), Camore (4 miles east), Dornoch (5 miles east) and Hilton (6 miles east). Further out, we also cover Tain (6 miles south-east), Alness (13 miles south), Invergordon (13 miles south), Golspie (10 miles north-east), Brora (15 miles north-east) and Cromarty (14 miles south). If you are somewhere remote, a little more planning is needed, so let us know when you get in touch.

Around Whiteface

Well-known places in the area include Proncy Castle (4.3 miles north-east). Open spaces near Whiteface include Loch a' Ghiubhais and Struie Hill.

Map of Whiteface © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job