Highland · Scotland
Golspie Fire Rated Sealant
Professional fire rated sealant in and around Golspie, with every bit of old sealant taken out first and a 12-month guarantee.
- Unsealed gaps around fire door frames
- Open holes round services passing through fire walls
- Linear gaps at the head of walls
Fire rated sealant for homes and businesses in Golspie
Where services or frames pass through a fire-resisting wall or floor, the gap around them needs a fire-rated seal. Each gap is sealed to the product maker’s tested detail for its size and substrate, with a record of the products and locations if you need one. If you are dealing with gaps left after a refit or conversion and damaged fire sealant left by other trades, we can help.
For a place like Golspie, the journey and timings are planned in advance, so the job can fit around guests, residents or opening hours where possible.
Each job carries a 12-month guarantee, whatever its size.
- Place
- Golspie (KW10)
- Wider area
- Highland
- Guarantee
- One year on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Landlord and commercial work in Golspie
We also work for property managers and facilities teams in Golspie and across Highland. We can quote a run of properties together, and we are fully insured.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we’ll quote.
What happens if it’s left?
Leaving a gap until a refurbishment comes round can mean years with it open. On its own, sealing it now is a small job that does not depend on other work. In an older home around Golspie, damp from a failed joint can get into timber and plaster.
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, along with when we can work on site. Call for a quick quote and we’ll go through it with you.
Why us?
- An ARBOMaster approved applicator
- Quality sealants from Arbo and Everbuild
- Over 20 years’ experience
- 180+ five-star Google reviews
See what affects the cost and customer reviews.
What we do, step by step
Most of a good job is in the preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. All told, the work takes anything from a few hours to several days, depending on how many gaps there are. Around Golspie, distance and access matter more than parking. Let us know how to find you and how to reach the joints, and the visit is planned around that.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Any non-fire-rated filler is removed and the faces cleaned.
- We fit backing where needed and apply the fire-rated sealant to depth.
- Every location is recorded with the product used for your records.
Getting ready for the visit
- Mention if the joints have been sealed before
- Mention any tricky access
- Keep children and pets away from the work area
Ask for a quote
We don’t publish a price list, as no two jobs are quite the same. Instead, we send you a clear quote for your job. To arrange one, email us at info@mrmastic.co.uk.
Related advice
When something else is needed
We’d rather tell you now than do work that will not last, so here’s what sealant can’t put right:
- Large holes that need a different fire-stopping system
- Doors that aren’t fire doors in the first place
- Certifying a building or signing off its fire safety
If you’re not sure, just drop us a line at info@mrmastic.co.uk and we will give you a straight answer before you book.
Where we work in Golspie
- Service penetrations
- Door frames
- Linear gaps
- Flats & HMOs
- Plasterboard & masonry
- Pipe & cable gaps
Nearby places to Golspie
Other services in Golspie
What fire rated sealant looks like in Golspie
For seaside hotels, guest houses and holiday lets around Golspie, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. We install fire-rated sealant to the product’s tested details, though we do not certify buildings or do fire risk assessments.
For landlords with property near Golspie station, any gap left by new services in shared walls should be closed with a fire-rated product.
Golspie is about 27 miles north of Nairn, in Highland. We carry out fire rated sealant for householders, landlords and businesses in Golspie and nearby, as part of our work across Highland. We cover 253 towns and villages across Highland, from the larger towns to small villages.
Our applicators cover all of the KW10 postcode area for fire rated sealant and the streets around it. You’ll find streets such as Main Street, Station Road and East Millicent Avenue, and we cover them all. If you are just outside Golspie, we cover Littleferry (3 miles south-west), Skelbo Muir (4 miles south-west), Embo (5 miles south), Brora (5 miles north-east) and Hilton (5 miles south). Within a short drive, we also cover Tain (12 miles south), Dornoch (7 miles south) and Balintore (15 miles south). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
Around Golspie
Golspie has its own railway station: Golspie station. Well-known places in the area include Dunrobin Castle (1.3 miles north-east) and Dunrobin Castle Museum (1.4 miles north-east). Open spaces near Golspie include Loch Fleet National Nature Reserve and Ben Bhraggie.
What we are called out for in Golspie
Door frames are a common weak spot. The gap between the frame and the wall is hidden behind the architrave, so it can be left open when a door is replaced.
People generally contact us after spotting one of these:
- Cracked or shrunken fire-rated sealant
- Standard silicone or caulk in a fire-stopping gap
- Open joints along the top of partitions
- Joints picked up in a fire-stopping survey
Managing a site like Golspie High School? Then service openings in fire-resisting walls need checking after any refurbishment.
Comparing quotes
- Which sealant they’ll use, and why
- What the cure time is
- What preparation is included
- How long the guarantee is
Golspie: your questions answered
I let a flat near Golspie station. Can you help?
Yes, rental work is part of what we do. You can drop us a line at info@mrmastic.co.uk with the address and a few details, and we’ll give you a fixed price before we start.
How do Scotland’s building regulations apply to fire-rated sealant in Golspie?
Scotland has its own building regulations, the Building (Scotland) Regulations, with their own technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that is how we fit it. We don’t certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
What sealant do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
Do you carry out fire risk assessments?
No. We follow the requirements from your assessor, designer or building control, and apply each product to its tested details.
How long will you be here?
It depends on the size of the job, but most jobs take from a few hours to a few days, depending on the number of gaps and the access. We’ll tell you when we quote.
Do you certify the fire stopping?
Ratings and certificates aren’t something we issue. What’s required is set by your assessor or designer, and the product’s tested details show what it achieves; we install to those details and record what we did.
Is there a guarantee?
Yes. Every job comes with a one-year guarantee.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned before resealing.
DIY versus a professional finish
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
What affects the quote in Golspie
We quote each job individually. These are the things that affect it:
- Access and height
- Any working-time requirements on site
- The number and length of the joints
- Whether old sealant or filler has to be cut out
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all play a part, and we’ll explain the quote if you ask.
Asking for a quote
Photos by email are helpful but not essential. Please mention:
- Access, such as stairs, a lift or height
- What the problem is, such as mould, gaps, leaks or cracking
- The type of property
- Photos by email, if that’s easy
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we’ll talk you through the work before giving you a price.