Highland · Scotland
Golspie External Mastic
Specialist external mastic for Golspie: careful preparation, the right product and tidy work. Call for a quick quote.
- Plants rooting in failed movement joints
- Joints with sealant missing in places
- Weathered mastic that no longer stretches
How we handle external mastic in Golspie
Joints in render and cladding are easy to overlook until a damp patch appears. We inspect them, agree which need doing and reseal with a weatherproof, flexible sealant. We work on brickwork movement joints, render & cladding joints and façade panels, and common reasons people get in touch are sealant pulling away from one side of the joint and joints with sealant missing in places.
Across smaller places in Scotland, stone and harled cottages, farm buildings and newer houses often stand exposed to wind and rain. Gutter joints and wall joints take a battering.
Big or small, you get the same 12-month guarantee.
- Place
- Golspie (KW10)
- Region
- Highland
- Cover
- 12 months on all our work
- Quote
- A clear price before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Do you need external mastic in Golspie?
Joints sealed without backing rod, or far too deep, rarely last. Sealant bonded to three sides has nowhere to go and rips as the joint opens.
Look out for these signs:
- Old sealant gone brittle and cracked
- Joints pointed up with cement by mistake
- Weeds or debris growing in open joints
- Leaking joints around cladding and façade panels
If you look after a building such as Golspie High School, its movement joints, gutters and trims need looking after like any other building’s.
What your quote should include
- What the quote includes, VAT included or not
- Who does the work, and how experienced they are
- What insurance they hold
- How long the guarantee is
Questions from Golspie
Does the coastal weather in Golspie affect outside sealant?
Near the sea, outside joints face more wind, rain and salt than they would inland, so preparation and the right sealant matter all the more. It’s worth checking the walls that face the sea first.
Is Golspie within the area you cover?
Yes, Golspie is covered. Our work covers the whole of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.
Should I point up the gap in my brickwork?
No. A mortar-filled joint can’t move, so the wall cracks somewhere else instead. Use a flexible sealant with backing rod.
Can you seal joints between two different materials?
Yes. Different materials move at different rates, so a flexible sealant is needed where they meet. The sealant is matched to both sides.
Is there any odour?
There can be a smell while the sealant cures, but it fades. Ventilation helps.
How long will you be here?
It depends on the size of the job, but most jobs take a few hours for a handful of joints, longer for a whole elevation. We will tell you when we quote.
Can new sealant go over the old?
No, because it fails. The old sealant always comes out first, so the new joint bonds to clean surfaces.
What information do you need?
A short description and the location, with photos by email if possible. If we need more, we will ask.
Keeping the joints in good condition
To keep the joints looking good and working properly:
- Keep soil, plants and ivy away from the joints
- Avoid pressure-washing directly into sealant joints
- Act on the first splits you see
- Leave the joints unpainted unless we’ve said otherwise
Look over the joints once a year, ideally after winter. Watch for splits, edges coming away or growth in the joint.
If you can see gaps, plants or bare sections in a joint, have it checked. Earlier resealing means a smaller job and a better result.
What happens on the day
We bring everything the job needs with us. After a quick look at the joints together, we protect the area and start. Most jobs take a few hours to a few days, depending on the length of joint and the access. For a place like Golspie, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- First, the joints are inspected and the access agreed.
- Every bit of old sealant and any mortar or debris is cut out.
- The faces are brushed clean and primed where the product requires it.
- We fit closed-cell backing rod to control the depth.
- The exterior sealant is applied, tooled and checked along its length.
How to prepare
- Let us know about stairs, lifts or work at height
- Tell us about any water getting in
- Keep children and pets away from the work area
How to get a quote
Asking for a quote is easy: let us know the job and the location and its rough size. A few photos by email make the job easier to understand.
Related advice
Outside joints around Golspie
Golspie is within about 1 mile of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That is hard on movement joints and outside wall joints, especially on the side facing the sea. Under the Repairing Standard, private landlords in Scotland have to keep homes wind and watertight, and failed outside joints work against that.
Rented homes near Golspie station change hands often, and split movement joints are easy to miss on a rental until damp shows inside.
Golspie is about 27 miles north of Nairn, in Highland. Homes, rented property, offices and hotels in Golspie is covered for external mastic, old or new, large or small. Every job comes with our 12-month guarantee. Golspie is one of 253 places in Highland we cover for external mastic.
All of KW10 is within our area for external mastic, from the main roads to the quietest streets. That includes homes and businesses on Main Street, Station Road and East Millicent Avenue and the roads around them. Close by, we work in Littleferry (3 miles south-west), Skelbo Muir (4 miles south-west), Embo (5 miles south), Brora (5 miles north-east) and Hilton (5 miles south). We also work in nearby towns such as Tain (12 miles south), Dornoch (7 miles south) and Balintore (15 miles south). If you are somewhere remote, a little more planning is needed, so mention it when you ask for a quote.
What’s near Golspie
Golspie has its own railway station: Golspie station. Well-known places in the area include Dunrobin Castle (1.3 miles north-east) and Dunrobin Castle Museum (1.4 miles north-east). Green spaces nearby include Loch Fleet National Nature Reserve and Ben Bhraggie.
Work for landlords, hotels and businesses
For anyone letting property in or around Golspie, several properties can go on one quote. Send us the addresses and the work at each, and pictures by email help.
Letting agents and landlords in Golspie can book us as well as householders. Sealant work between tenants keeps a property looking cared for before the next move-in.
Should I try it myself first?
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
What the job involves on each surface
Brickwork movement joints
Brick movement joints are often mistaken for a missing mortar line. Where one has been mortared, we cut it out and reseal it with sealant where it can be done safely.
Concrete and blockwork
Wide joints in concrete need the depth controlling carefully. We size the backing rod to the gap and keep the sealant to the right depth.
Also near Golspie
What else we do in Golspie
What affects the quote in Golspie
You’ll get a clear quote before work begins. It’s based on:
- Whether there’s mould to deal with
- The number of rooms or windows
- When we can work, for business premises
- The amount of work
We do not show prices on the website, because the cost depends so much on the job itself. Call for a quick quote.
Asking for a quote
Photos help, but a description is a good start. Please mention:
- What the problem is, such as mould, gaps, leaks or cracking
- Pictures of the joints, sent by email
- How we’d reach the joints
- If someone has resealed it before
Need a quote? Please email us at info@mrmastic.co.uk with a few details. We’ll explain what we’d do and send you a clear quote before any work starts.