Edinburgh · Scotland
Fire-rated sealant in Stockbridge, Edinburgh
Specialist fire rated sealant for Stockbridge: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Open gaps behind door architraves
- Old fire sealant that has split or come away
- Gaps flagged on a fire risk assessment
Landlord and commercial work in Stockbridge
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a one-year guarantee.
Hotels need rooms back in use, so the work can be planned room by room. Hotel work is part of what we do, alongside homes and businesses.
How we handle fire rated sealant in Stockbridge
Deciding which gaps need fire stopping is not our role; that comes from your fire risk assessor, designer or building control. What we do is apply the right product to that specification, properly and neatly. We work on pipe & cable gaps, service penetrations and flats & HMOs, and common reasons people get in touch are gaps where walls meet ceilings or slabs and ordinary sealant used where a fire-rated product was needed.
In Scotland’s cities, hotels and student accommodation need sealant work done without emptying the building, so work in Stockbridge can be planned room by room, and out of hours where needed.
All our work comes with our one-year guarantee.
- Location
- Stockbridge (EH3, EH4, EH2)
- Wider area
- Edinburgh
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Fire rated sealant around Stockbridge
If you run a hotel, guest house or holiday let in a coastal place like Stockbridge, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Scotland has its own building regulations, the Building (Scotland) Regulations, with technical handbooks. Fire-rated sealant is installed to the manufacturer’s tested details, though we don’t certify buildings or do fire risk assessments.
For landlords with property near Edinburgh Waverley station, any gap left by new services in shared walls should be closed with a fire-rated product. Schools such as Broughton High School are buildings too, and fire-stopping around service openings should be restored whenever new services go in.
Stockbridge is about 1 mile north of Edinburgh, in Edinburgh. If you need fire rated sealant in Stockbridge, please send an email to info@mrmastic.co.uk for a quick quote. We cover Edinburgh from our Crawley base. Our Edinburgh coverage runs to 175 places, and Stockbridge is one of them.
Postcode districts we cover here for fire rated sealant: EH3, EH4 and EH2. We cover properties on Canon Lane, Circus Lane and Fettes Avenue and the roads around them. Nearby, we also carry out fire rated sealant in Silvermills (1 mile east), Comely Bank (1 mile west), Dean Village (1 mile south-west), Inverleith (1 mile north) and Warriston (1 mile north-east). We also work in nearby towns such as Queensferry (7 miles west), South Portobello (4 miles east), Southhouse (5 miles south-east), Gilmerton (5 miles south-east), Gracemount (4 miles south-east) and Greendykes (4 miles south-east).
What’s near Stockbridge
Typical jobs here are in homes near Stewart's Melville College, St Cuthbert's Church and Hamilton's Bar & Kitchen, among other places. You will also find London Street Primary School (0.9 miles east), Stockbridge public library (under half a mile east) and King George V Park (0.5 miles east). The nearest railway station is Edinburgh Waverley station, about 0.9 miles south-east of the centre. Nearby you’ll also find Palestine Museum (0.5 miles east) and Waverley Mall (0.8 miles south-east). Green spaces nearby include The New Leaf Co-op and Salisbury Crags.
Common questions in Stockbridge
Are the rules for fire-rated sealant different in Scotland?
Building work in Scotland comes under the Building (Scotland) Regulations and their technical handbooks. Whatever the rules, fire-rated sealant has to be installed to the manufacturer’s tested details, and that is how we fit it. We don’t certify buildings or carry out fire risk assessments, so your fire risk assessor or building control will advise on what’s needed.
Do you work for hotels and guest houses in Stockbridge?
Yes, hospitality work, including hotels, is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Do I need to be at home?
We need access to the joints, so we’ll agree that with you when we book. Indoors, that generally means someone at home.
Do you certify the fire stopping?
We don’t certify fire stopping or quote ratings. We apply the specified product to the manufacturer’s details and list the locations and products for you.
How long does the job take?
Most jobs take from a few hours to a few days, depending on the number of gaps and the access, including the preparation. Your quote will say how long we expect yours to take.
Can you quote for more than one area?
Yes, and it often makes sense. Doing several areas at once is normally more efficient.
Do you do fire sealant around door frames?
Yes. We seal the gap between the frame and the wall with a suitable fire-rated product following the tested details. The door leaf and its hardware need a door specialist.
Can ordinary silicone be used in a fire-stopping gap?
No. Ordinary silicone, caulk or foam is not tested as fire stopping. If it’s been used, we remove it and use the right product.
What we are called out for in Stockbridge
Gaps around door frames are easily missed. The architrave hides the gap between frame and wall, so it’s easy to leave unsealed when doors are changed.
Look out for these signs:
- Joints picked up in a fire-stopping survey
- Unsealed gaps where pipes and cables go through a wall
- Ordinary sealant used where a fire-rated product was needed
- Damaged fire sealant left by other trades
For buildings such as Stockbridge Church, gaps around pipes and cables are worth checking after any building work there.
Comparing quotes
- How much experience the applicator has
- How the surfaces are prepared before sealing
- What happens if the job turns out different
- Which sealant they’ll use, and why
Honest limits
To be straight with you, some problems need a different trade:
- Certifying a building or signing off its fire safety
- Fire doors that need new seals, closers or hardware
- Big openings where sealant alone is not the tested solution
If in doubt, drop us a line at info@mrmastic.co.uk and we will say what we think before you book.
Where we work in Stockbridge
- Flats & HMOs
- Plasterboard & masonry
- Linear gaps
- Service penetrations
- Door frames
- Pipe & cable gaps
Looking after it afterwards
Looking after new joints is easy:
- Store the list of sealed gaps with your building paperwork
- Do not fill fire-stopping gaps with ordinary foam or silicone
- Take photos of fire stopping before ceilings or boxing go back
- Include hidden areas like risers in routine checks
Any fire seal that’s cut or drilled needs resealing to its tested detail. New services through a sealed wall should include fire stopping in the plan.
It’s easiest to seal gaps while they’re few and easy to reach. Leave them and each new job adds another hole and the job gets bigger.
Also near Stockbridge
Also in Stockbridge
Surface by surface
Plasterboard walls
We check that the board around the gap is sound. Loose material is removed so the sealant has a firm edge.
Masonry and concrete
For masonry and concrete, we use a product tested in that substrate. The gap is cleaned of dust first so the sealant bonds.
What happens on the day
You don’t need to clear the whole room or building, only the area right around the joints. We protect the rest, and the job takes a few hours for a handful of gaps, and longer for a whole building in most cases. In a city area like Stockbridge, parking may be by permit or pay-and-display, so tell us what’s nearby. If you are in a flat, let us know how we get in at the street door.
- Access to each area is agreed so the work can run in order.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- The fire-rated or intumescent sealant is applied and tooled to the tested detail.
- We record what was done and flag anything that needs a different system.
Before we arrive
- Tell us about any previous sealing or DIY attempts
- Where the joints are inside, avoid wetting them before we arrive
- Plan for the work area to be out of bounds to pets and children
Getting a quote
Getting a quote is simple: tell us what needs doing and where and its rough size. A few photos by email make the job easier to understand, and we’ll take it from there.
Read more
What affects the quote in Stockbridge
The price is agreed before any work begins. It’s based on:
- Whether the work is at height
- Working hours on commercial sites
- Whether there’s mould to deal with
- How many rooms, windows or areas are involved
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all make a difference.
What we need to know
Photos by email are helpful but not essential. Please mention:
- The address or postcode of the job
- Whether it’s a home or a business
- The problem you’ve noticed
- Pictures of the joints, sent by email
Want a quote for fire rated sealant? Please send an email to info@mrmastic.co.uk and tell us about the job. We will explain what we’d do and send you a clear quote before any work starts.