Greater London · England
Enfield Fire Rated Sealant
Intumescent and fire-rated sealant around gaps, frames and service penetrations in Enfield, with a one-year guarantee on every job. Ask us for a quote.
- Fire seals that have cracked with movement
- Joints picked up in a fire-stopping survey
- Gaps left after a refit or conversion
What fire rated sealant looks like in Enfield
Many London buildings have tight access and loading restrictions, and out-of-hours working is possible to arrange. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, which is often where open fire-stopping gaps are first noticed. We work to the specification you are given, installing the product to its tested details.
Community buildings like Church of St Andrew are part of the picture too: service openings in its walls need the right fire-rated sealant, as in any building. For landlords with property near Enfield Town station, new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Enfield is about 9 miles north of St Pancras, in Greater London. Homes, rented property, offices and hotels in Enfield is covered for fire rated sealant. Every job comes with our one-year guarantee. Enfield is one of 764 places in Greater London we cover for fire rated sealant. For nearby work, see our London page, about 11 miles away.
Here we cover the EN1, EN2 and N21 postcode area for fire rated sealant. Streets in the area include Lea Road, Farr Road and Cecil Road, and we cover them all. With the A110 close by, Enfield is easy for our applicators to reach. Neighbouring places we cover for fire rated sealant include Bush Hill Park (1 mile south-east), Bush Hill (1 mile south), Enfield Chase (1 mile west), Gordon Hill (1 mile north) and Forty Hill (1 mile north-east). We also work in nearby towns such as London (11 miles south), City of Westminster (10 miles south), Marylebone (10 miles south), Kensington (12 miles south-west), St Pancras (9 miles south) and Shoreditch (9 miles south).
Around Enfield
Around Enfield, our work takes us to homes and buildings near Kings Head pub, St Andrew's CofE Primary School and Enfield Town Park. There’s a railway station in Enfield itself: Enfield Town station. Nearby you will also find Museum of Enfield (within half a mile south) and St Michaels Hospital (0.7 miles north). The countryside around Enfield includes Bowyer's Water and Pole Hill.
Fire rated sealant in Enfield
Bigger jobs can be worked through in stages, flat by flat or floor by floor, with each location and product recorded. That record is useful for your files and for whoever looks at the building next. Typical jobs include gaps where walls meet ceilings or slabs and open gaps behind door architraves, across service penetrations, door frames and flats & HMOs.
London blocks of flats carry pipes and cables through walls and floors in their common parts and service risers. For managing agents and building owners in Enfield, that can mean fire-rated sealant around service openings as well as resealing in shared washrooms and kitchens.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we will put it right.
- Location
- Enfield (EN1, EN2, N21)
- Region
- Greater London
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
DIY sealant or a professional job?
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
Why it’s worth doing now in Enfield
Doing it once, properly, beats doing it twice. If the details weren’t followed, the seal may need redoing when the building is next checked. In London conversions, one flat’s bathroom is often above another flat’s ceiling, so a small leak from tired sealant can mean a neighbour’s ceiling and a lot of disruption. Dealing with it early is far simpler.
No two jobs are quite the same, so each one gets its own quote. Size, access and the product the joint needs all make a difference, and we’ll explain the quote if you ask.
What you get with us
- We never seal over old sealant
- Neat joints and a tidy finish
- Quality sealants from Arbo and Everbuild
- Anti-fungal silicone where joints get wet
Towns and villages near Enfield
Other services in Enfield
What affects the quote in Enfield
We don’t publish a price list, because jobs vary so much. What we look at:
- Whether old sealant or filler has to be cut out
- How easy the joints are to reach
- The number of rooms or windows
- Working hours on commercial sites
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.
Asking for a quote
To make quoting easier, let us know:
- How we’d reach the joints
- The address or postcode of the job
- The type of property
- The rough size of the job
To get a quote, ring 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You will have a clear quote before any work starts.
Keeping the joints in good condition
Joint life depends on how it’s used and looked after. We suggest:
- Report cracked or damaged seals as soon as you notice them
- Never patch a fire seal with standard sealant
- Tell trades working in the building that fire seals must be put back
- Keep the record of products and locations with your fire safety documents
Do not add foam, filler or ordinary sealant over a fire seal. If it needs repair, use the same type of product. We can tell you which product we used.
A flagged gap shouldn’t wait for the next assessment. Get it sealed and recorded so you can show it was dealt with.
Different surfaces, different methods
Door frames
The gap between a door frame and the wall around it needs sealing as well as the door itself. We seal that gap with a fire-rated sealant suited to the frame and wall.
Linear gaps
Gaps along the top of partitions are easy to miss above a ceiling. We work along the whole run so there are no open sections left.
How it works
The work is kept neat and contained to the joints we’re treating, so you can carry on as normal. The job normally takes anything from a few hours to several days, depending on how many gaps there are, and we explain the cure time before we leave. In Enfield, flats, stairs and shared entrances are part of the routine. If the building has a concierge, managing agent or access rules, tell us when you book.
- First we work through your list or survey, measuring each gap and checking what it’s formed in.
- Anything that isn’t fit for the job comes out, and the gap is cleaned.
- Where the tested detail needs backing or fill, we fit it.
- We apply the fire-rated or intumescent sealant to the specified depth and tool it.
- We record the locations and products used for your records.
Getting ready for the visit
- Mention any parking rules near the property
- Mention any sign-in or site rules at work premises
- Clear the area around the work
Ask for a quote
Getting a quote is simple: let us know the job and the location, and roughly how big it is. A few photos by email make the job easier to understand.
Advice
When to call us in Enfield
Gaps also open up as buildings move: cracked or debonded sealant leaves an open route through the wall. Knocks, maintenance and building work damage it further.
Keep an eye out for any of the following:
- Cracked or shrunken fire-rated sealant
- Gaps filled with a product that isn’t fire-rated
- Sealant items on a fire risk assessment action list
- Unsealed gaps around fire door frames
Schools such as Enfield Grammar School are buildings too, and service openings in fire-resisting walls need checking after any refurbishment.
Questions to ask before you book
- What insurance they hold
- What happens if they find a problem under the old sealant
- Who does the work, and how experienced they are
- Is VAT in the price?
FAQs for Enfield
Is parking a problem for a job in Enfield?
It can be, so it helps to tell us about permits, visitor bays or off-street space when you book. The visit is then planned around what’s available.
Can you do fire rated sealant in Enfield?
Yes, Enfield is within the area we cover. We work across London and the South East. You can call 0345 464 0079 or drop us an email and tell us what needs doing.
What’s the difference between intumescent and fire-rated sealant?
An intumescent material expands when it’s heated. Many fire-rated sealants work this way, but not all and which one is used depends on the job.
How do I get a quote for fire rated sealant in Enfield?
There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. You will get a clear quote before we start.
Is it messy?
Tidy work is part of the job. We protect what’s around the joints, and the area is left clean when we finish.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned.
Is the work guaranteed?
Yes, for a year. If anything is not right with the work within the year, let us know and we’ll sort it.
Is there any odour?
Possibly a little. It fades as the sealant cures.