Greater London · England
Enfield Chase Fire Rated Sealant
Intumescent and fire-rated sealant around gaps, frames and service penetrations in Enfield Chase, with a one-year guarantee on every job. Ask us for a quote.
- Open holes round services passing through fire walls
- Cracked or shrunken fire-rated sealant
- Standard silicone or caulk in a fire-stopping gap
How we handle fire rated sealant in Enfield Chase
We do not assess buildings or decide what fire stopping is needed; your assessor, designer or building control sets that out. Our part is applying the specified sealant carefully, to the right depth and with the right backing. We work on flats & HMOs, service penetrations and pipe & cable gaps, and the jobs we see most are door frames with gaps between frame and wall and new service routes left unsealed after building work.
Across London, offices, shops, hotels, student halls and blocks of flats all need sealant work from time to time, from washroom silicone to fire-rated sealant around pipes and cables passing through walls. Out-of-hours working can be arranged where a building in Enfield Chase can’t close.
We stand behind the work with a one-year guarantee, so you’re covered after we’ve gone.
- Location
- Enfield Chase (EN2, N21, EN1)
- Wider area
- Greater London
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Aftercare tips
Simple care keeps the joints in good condition. We recommend:
- Photograph sealed gaps before they’re covered up
- Never patch a fire seal with standard sealant
- Include hidden areas like risers in routine checks
- Do not paint over fire sealant until it has cured
Don’t drill through or remove a fire seal without putting it back properly. If you need new services through a sealed wall, plan the fire stopping as part of the job.
Leave a fire-stopping gap open and smoke can move through the building much more easily. Closing it is normally a straightforward job.
What sealant work cannot fix
New sealant cannot fix everything, and we’ll tell you before we start. It won’t solve:
- Large holes that need a different fire-stopping system
- Sign-off of the building, which sits with building control or your assessor
- Construction that doesn’t provide fire resistance on its own
If in doubt, phone 0345 464 0079 or send us an email and we’ll say what we think.
Surfaces we seal
- Door frames
- Plasterboard & masonry
- Linear gaps
- Pipe & cable gaps
- Flats & HMOs
- Service penetrations
Fire rated sealant in Enfield Chase: local notes
Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you are given, installing the product to its tested details. Commercial buildings in London often have strict access rules and limited loading, and out-of-hours working is possible to arrange.
For site and facilities teams at buildings such as Chase Side Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices. As a London address, Enfield Chase can be tricky for parking: tell us about permits, visitor bays or off-street space when you book.
Enfield Chase is about 3 miles north-west of Edmonton, in Greater London. Every kind of property in Enfield Chase can book us for fire rated sealant. Every job comes with our 12-month guarantee. 764 places in Greater London are on our list, large and small. There’s also a page for London, about 11 miles away.
Work in EN2, N21 and EN1 works the same way as everywhere else we cover. Whether your property is on Monks Road, Audley Road and Nunn's Road or anywhere close by, we can help. With the A1005 close by, Enfield Chase is easy for our applicators to reach. We also cover the places around Enfield Chase: Enfield (1 mile east), Gordon Hill (1 mile north-east), Bush Hill (1 mile south-east), Clay Hill (1 mile north-east) and Bush Hill Park (1 mile south-east). We also work in nearby towns such as London (11 miles south), City of Westminster (10 miles south), Marylebone (10 miles south), Kensington (12 miles south-west), St Pancras (9 miles south) and Shoreditch (9 miles south).
Landmarks near Enfield Chase
In Enfield Chase, that means homes and buildings near Enfield County School for Girls, The Old Wheatsheaf pub and Enfield Town Park and the streets around them. Enfield Chase has its own railway station: Enfield Chase station. A little further out are Edmonton Green Shopping Centre (2.8 miles south-east) and Museum of Enfield (0.8 miles south-east). The countryside around Enfield Chase includes Pole Hill and Oakleigh Park Rail Cutting.
Leave it or put it right?
If an assessor has flagged gaps, it makes sense to close them before the next review. Getting them done and written up means you can show the action was taken. In London conversions, one flat’s bathroom is often above another flat’s ceiling, so a small leak from tired sealant can mean a neighbour’s ceiling and a lot of disruption. Dealing with it early is far simpler.
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all play a part.
Why book with us
- Every job guaranteed for a year
- Rated 4.9 stars on Google
- Anti-fungal sanitary silicone in wet areas
- Domestic, commercial and hotel work
Take a look at our cost guide or what customers say.
Should I try it myself first?
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
Signs you need fire rated sealant in Enfield Chase
Many open fire-stopping gaps are made after the building is finished. New cables, pipes and data runs go through walls and ceilings and the hole they leave does not always get resealed.
Common reasons people contact us are:
- Door frames with gaps between frame and wall
- Sealant items on a fire risk assessment action list
- Fire seals that have cracked with movement
- Holes left by a change of layout
Community buildings like Church of St Mary Magdalene are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
What to look for in a quote
- Whether the sealant suits the joint
- How the colour is chosen
- How the joint is cleaned and prepared
- Is the old sealant removed completely?
FAQs for Enfield Chase
Do you work for landlords with property near Enfield Chase station?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or drop us an email and tell us about the property, and we’ll give you a clear price.
Can you do fire rated sealant in Enfield Chase?
Yes. Our work covers London and the South East, and Enfield Chase is part of that. Just ring 0345 464 0079 or send us an email with a few details of the job.
Are you ARBOMaster approved?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Do you certify the fire stopping?
We do not issue ratings or certificates ourselves. What’s required is set by your assessor or designer, and the product’s tested details show what it achieves; we install to those details and record what we did.
Can new sealant go over the old?
No, because it fails. The old sealant always comes out first, so the new sealant bonds properly.
Will you leave a mess?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
Do you work in flats, HMOs and commercial buildings?
Yes, in flats, HMOs, schools, offices and other buildings, occupied or empty. Tell us how the building is used and we will plan around it.
Will we have a record of what was sealed?
Yes. We note each location and the product that went in, so you have it on file.
Places near Enfield Chase
Also in Enfield Chase
What affects the quote in Enfield Chase
Some jobs are bigger than they look, and some smaller. The main factors:
- How many rooms, windows or areas are involved
- Mould in or behind the old joints
- The product the joint needs
- Access and height
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, plus any working-time requirements on site. Call for a quick quote and we will go through it with you.
What we need to know
Photos help, but a description is a good start. Please mention:
- If someone has resealed it before
- Whether it’s a home or a business
- How we’d reach the joints
- How many joints, rooms or windows are involved
For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we will explain what’s involved.
How the visit works
Good joint work is mostly preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. In total, it generally takes anything from a few hours to several days, depending on how many gaps there are. In a London area like Enfield Chase, the main things to plan are parking and access: let us know about parking, the floor we will be working on and any lift or shared entrance.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Old or unsuitable sealant is cut out and the gap cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- The sealant goes in to the depth its detail sets, then it’s tooled off.
- Finally, we list where we worked and what we used, for your records.
Before we arrive
- Mention any sign-in or site rules at work premises
- Keep children and pets away from the work area
- Let us know about stairs, lifts or work at height
Get a quote
Want a quote for fire rated sealant? Please phone 0345 464 0079 or send us an email with a few details. You will know what we plan to do, and what it will cost, before any work begins.