Renfrewshire · Scotland

Ferguslie Park External Mastic

External mastic in Ferguslie Park from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.

  • Panel joints letting water in
  • Moss and dirt in joints with no sealant left
  • Movement joints filled with mortar instead of sealant

Trusted external mastic in Ferguslie Park

External mastic in Ferguslie Park

A movement joint is a deliberate break that lets a wall expand and contract. The sealant in it has to stretch and squeeze for years, so once it splits or hardens, the joint stops working and water gets in. Typical jobs include rigid filler in a joint that should flex and failed sealant between panels on a façade, on concrete & block, brickwork movement joints and façade panels.

Outside joints can only be sealed when they’re dry, so work in Ferguslie Park depends on the weather, and longer journeys are planned in advance. Let us know about access to every wall and roofline.

The work is covered for a year after we finish. If there’s a problem with it, please email us at info@mrmastic.co.uk.

Mr Mastic applicators lined up beside the company vans, one holding a sealant gun
Where
Ferguslie Park (PA1, PA3, PA2)
Wider area
Renfrewshire
Guarantee
A year, on every job
Quote
A clear quote up front
Email
info@mrmastic.co.uk
Page updated
26 October 2026

What happens if it’s left?

Pointing a movement joint with mortar might seem a neat fix, but it locks the joint solid. The movement then cracks the brickwork or render nearby. A flexible sealant over backing rod is what the joint needs. In a place like Ferguslie Park, small leaks are easy to put off, but water through a failed joint keeps working away until it’s fixed.

There are no prices on our website, because each job is priced on what it involves. Call for a quick quote.

Why us?

  • We are fully insured
  • 180+ five-star Google reviews
  • Old sealant always removed completely
  • White, clear, grey or coloured to suit, where the product allows

Read what affects the cost or customer reviews.

Outside joints around Ferguslie Park

Harled (roughcast) walls are common in Scotland, and where harling meets frames, pipes and other materials, the joint needs a flexible sealant that grips a rough surface. The west of Scotland is wetter than the east, which means movement joints and outside wall joints has to cope with a lot of rain.

If you let a flat or house near Paisley St James station, failed wall and movement joints let damp in, so they’re worth checking between tenancies.

Ferguslie Park is about 1 mile north-west of Paisley, in Renfrewshire. Every kind of property in Ferguslie Park can book us for external mastic, old or new, large or small. Every job comes with our 12-month guarantee. Across Renfrewshire, we cover 21 places, and Ferguslie Park is one of them. Our Glasgow page covers work nearby (7 miles or so).

Work in PA1, PA3 and PA2 is quoted and booked the same way as anywhere else. If you need external mastic at a property on Candren Road, Killoch Lane and Killoch Road or a nearby road, we can help. With the A737 close by, Ferguslie Park is simple for us to get to for external mastic. We also cover the places around Ferguslie Park: Inkerman (1 mile north-west), Paisley (1 mile south-east), Elderslie (2 miles south-west), Charleston (2 miles south-east) and Glenburn (2 miles south-east). Within a short drive, we also cover Renfrew (3 miles north-east), Johnstone (3 miles south-west), Bishopton (4 miles north-west), Bridge of Weir (5 miles west), Craigends (3 miles west) and Kilbarchan (4 miles west).

Local landmarks in Ferguslie Park

We work in homes and buildings around Hayweighs pub and Gallows Green. Ferguslie Park’s nearest station is Paisley St James station, roughly 0.5 miles north-east of the centre. A little further out are Riccartsbar Hospital (1.1 miles south-east) and Stanely Castle (1.7 miles south). For a walk, there’s Walls Hill and Walls Loch.

Map of Ferguslie Park © OpenStreetMap contributors

How we quote for external mastic

Jobs vary more than people expect. What affects the quote:

  • How many areas need sealing
  • The number and length of the joints
  • Working hours on commercial sites
  • Whether old sealant or filler has to be cut out

Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether the work is at height. Your quote takes all of that into account.

What to tell us for a quote

You do not need to know the technical terms. Just tell us:

  • If someone has resealed it before
  • The type of property
  • Roughly how big the job is
  • Access, such as stairs, a lift or height

Every job is quoted individually. Simply send an email to info@mrmastic.co.uk and describe the job and send photos if you have them.

Looking after it afterwards

To keep the joints looking good and working properly:

  • Point out the joints to other trades
  • Deal with leaking gutters that soak the joints below
  • Check the sealant is paintable before painting near it
  • Look over the joints every year, ideally after winter

Have a quick look at the joints each spring. Splits, gaps at the edges or plants in the joint are early warning signs.

Gaps, plants or missing sealant in a joint are worth getting looked at. Earlier resealing means a smaller job and a better result.

How it works

Every visit runs the same way: we check the joints, protect the area around them, carry out the job and clear up. It generally takes a few hours to a few days, depending on the length of joint and the access. Outdoor work around Ferguslie Park depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Work indoors isn’t affected.

  1. We start by checking each joint, agreeing the ones to redo and how we will reach them.
  2. The old mastic and anything lodged in the joint is removed.
  3. We clean both faces of the joint and prime them where the product calls for it.
  4. Closed-cell backing rod is fitted to set the depth and stop three-sided bonding.
  5. A flexible exterior sealant is applied and tooled in a colour to suit the wall.

How to prepare

  • Keep children and pets away from the work area
  • For indoor joints, keep the area dry beforehand if you can
  • Let us know if you’ve seen damp or leaks

How to get a quote

Asking for a quote is easy: let us know what needs doing and where and its rough size. A few pictures by email make the job easier to understand.

Get a price

Related advice

When to call us in Ferguslie Park

A lot of failed joints come down to preparation: joint faces that were dusty or damp, unprimed where they needed it, or still carrying old sealant. The new sealant then lets go long before it should.

The problems people generally mention when they call are:

  • Water getting into walls through failed joints
  • Weeds or debris growing in open joints
  • Failed sealant between panels on a façade
  • Brick movement joints where the sealant has split

For site and facilities teams at buildings such as Castlehead High School, movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.

What your quote should include

  • How the joint is cleaned and prepared
  • What the cure time is
  • How much experience the applicator has
  • Is VAT in the price?

10 questions to ask before you book

Different surfaces, different methods

Concrete and blockwork

The face of concrete or block is often dusty, so preparation is key. We prime where the sealant needs it before the bead.

Copings and trims

Joints in copings, parapets and trims are exposed to the worst of the weather. We reseal them with an exterior sealant suited to the material.

DIY sealant or a professional job?

Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.

A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

Your questions about external mastic in Ferguslie Park

I let a flat near Paisley St James station. Can you help?

Yes, landlords and agents are among the people we work for. Just email us at info@mrmastic.co.uk with the address and what needs doing, and we will give you a clear quote.

Will you come out to Ferguslie Park?

Yes. Ferguslie Park is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland. Just mention lanes, gates or anything else about the route when you book.

Can you do several jobs on one visit?

Yes, we can. More than one area can go on one quote.

How long before the joint can be used?

Most sealants are touch-dry well before they’re fully cured. We’ll give you the cure time for the product we used before we leave.

Do you use backing rod?

Closed-cell backing rod sets the depth of the sealant and stops it sticking to the back of the joint. That way it bonds to the two sides only and can stretch.

How long does external mastic take?

Typically it takes a few hours for a handful of joints, longer for a whole elevation. Bigger jobs take longer, and we will say how long yours will take.

Are you ARBOMaster approved?

Yes. Mr Mastic is an ARBOMaster approved applicator.

Do you work at height?

That depends on how high the joints are and the ground below. Low-level joints are straightforward; for higher work, tell us about the building and we will confirm what’s needed.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job