Kent · England
Bathroom Resealing in Wickhambreaux
Bath, shower, basin, wet room, worktop and sink resealing in Wickhambreaux, with a 12-month guarantee on every job. Call for a quick quote.
- Lumpy, uneven sealant from a DIY attempt
- Sealant that has split, shrunk or peeled away
- Shrunken sealant along the back of a worktop
How we quote for bathroom resealing
We quote each job individually. This is what makes a difference:
- Working hours on commercial sites
- Whether old sealant or filler has to be cut out
- Mould in or behind the old joints
- The number and length of the joints
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote.
What we need to know
What to tell us when you ask for a quote:
- Where the property is
- If it’s domestic, commercial or a hotel
- A few photos by email, if you can
- The problem you’ve noticed
Every job is quoted individually, so the first step is telling us about yours. Just phone 0345 464 0079 or send us an email with the details, and pictures are welcome.
How we handle bathroom resealing in Wickhambreaux
Sealant that’s mouldy, cracked or peeling is worth sorting before it lets water through. A photo of the joints helps when you ring 0345 464 0079 or email us, and you’ll get a clear quote for bathroom resealing in Wickhambreaux. We work on shower trays & enclosures, sinks & splashbacks and basins & vanity units, and people most often call us about mouldy sealant that has gone black and water getting behind the bath panel.
Homes around Wickhambreaux are mostly houses and cottages rather than flats, some with bathrooms tucked into older rooms or extensions. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
Big or small, it’s backed by our 12-month guarantee in Wickhambreaux and across Kent.
- Location
- Wickhambreaux (CT3)
- Wider area
- Kent
- Guarantee
- 12 months on all our work
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Nearby places to Wickhambreaux
More services for Wickhambreaux
Why deal with it now?
Running new silicone over the old joint can look tidy for a few weeks, but it can’t stick to what’s underneath. Water creeps under it and mould follows, and the next reseal means two layers to cut out. Where a wall is exposed, as many are in small places like Wickhambreaux, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
A failed joint rarely gets cheaper to fix by waiting. If you’re unsure, ring 0345 464 0079 or drop us an email for an honest opinion and a quote.
Why choose Mr Mastic in Wickhambreaux
- We leave the area clean and tidy
- White, clear, grey or coloured to suit, where the product allows
- Approved under the ARBOMaster scheme
- 12-month guarantee on every job
Take a look at how sealant jobs are priced and customer reviews.
Your questions about bathroom resealing in Wickhambreaux
Do you work in hotels near Wickhambreaux?
Yes. Hotel and guest-house work is part of what we do. Work can be planned room by room, and out-of-hours working can be arranged.
Do you work for landlords with property near Bekesbourne station?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or email us and tell us about the property, and we will give you a clear quote.
Do you do kitchens as well as bathrooms?
Yes. We reseal worktop upstands, sinks and splashbacks, with a sealant suited to kitchens, colour-matched where it shows.
Will it make a mess?
Not at all. The area is protected while we work and cleaned up afterwards.
Do you take out the old sealant first?
Yes, every time. New sealant won’t bond properly to old, so any old material comes out before anything new goes in.
What does bathroom resealing cost?
We don’t publish prices, because the cost depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.
Is it worth trying it myself?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. If it doesn’t work out, we can redo it.
Can new silicone go straight over the old?
No, never. Sealing over the top looks fine for a few weeks, then lifts, because silicone doesn’t bond to silicone. We remove the old bead completely before resealing.
Keeping the joints in good condition
So the new joints stay in good condition:
- Keep scourers and sharp tools away from the bead
- Do not let bottles sit on the bead
- Open a window or run the fan so the room dries
- Use gentle cleaners on the silicone
Don’t stand bottles along the bead, as they hold water against it. A quick squeegee after showering keeps water from sitting on the joint.
Watch for the early signs: a corner lifting, a gap behind the bead, a dark line under the silicone or a damp patch on the ceiling below. Any of these means the joint needs attention.
Wickhambreaux homes and their sealant
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings. Wickhambreaux has hotels and guest accommodation nearby. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room.
Rented homes near Bekesbourne station change hands often, and a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. For site and facilities teams at buildings such as Wickhambreaux Church of England Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Wickhambreaux is about 4 miles east of Canterbury, in Kent. Wickhambreaux gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Wickhambreaux is one of 922 places in Kent where we work. We also work in Chelmsford, around 43 miles away.
Every address in CT3 is within our area for bathroom resealing, from the main roads to the quietest streets. Streets in the area include The Street, Wickham Court Lane and Seaton Road. Neighbouring places we cover for bathroom resealing include Seaton (1 mile east), Ickham (1 mile south), Littlebourne (1 mile south-west), Bramling (1 mile south) and Bekesbourne (2 miles south-west). We also work in nearby towns such as Canterbury (4 miles west), Margate (11 miles north-east), Dover (11 miles south-east), Folkestone (14 miles south), Ramsgate (10 miles east) and Broadstairs (12 miles north-east).
Near you in Wickhambreaux
We work in homes and buildings around The Rose Inn and Spires Academy. The closest station to Wickhambreaux is Bekesbourne station, about 2.6 miles south-west. Other landmarks nearby include Canterbury Castle (4.8 miles west) and St Martins Hospital (3.4 miles west).
When to call us in Wickhambreaux
Silicone needs a clean, dry surface without any grease to stick to. Traces of soap, bath oil and old sealant stop it gripping, and a joint that looked fine soon begins to come away.
Most people get in touch after spotting one of these:
- Water getting behind the bath panel
- Gaps where the bath or tray has moved
- Two layers of silicone, both failing
- Leaking joints on a shower screen
For an older house near a landmark such as Church of St Andrew, older homes can move a little, which is hard on rigid grout and tired sealant.
What your quote should include
- How long to leave it before use
- Is VAT in the price?
- Whether you can choose the colour
- What product goes in the joint
For landlords and businesses
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.
How it works
Good joint work is mostly preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it usually takes a morning or an afternoon for most single baths and showers. For a village or hamlet like Wickhambreaux, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We protect the area and cut out all of the old sealant, including the film left on the tiles.
- Next, the joint is cleaned and any mould is treated.
- The joint is left to dry, and baths are filled with water first.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- Finally we tidy up and explain the cure time before we leave.
Preparing for the visit
- Let us know about stairs, lifts or work at height
- Move anything stored near the joints
- Mention any leaks or damp you’ve noticed
Getting a quote
We don’t publish a price list, because every job is different. Instead, we give you a clear quote for your job. To arrange one, phone 0345 464 0079 or drop us an email.
Related advice
Can I do it myself?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, then guaranteed for a year.