Kent · England
Bathroom Resealing in Seaton
Baths, showers and worktops in Seaton need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Smears of silicone across the tiles
- Two layers of silicone, both failing
- Water getting behind the bath panel
What bathroom resealing looks like in Seaton
There are hotels and other places to stay in and around Seaton. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
For landlords with property near Bekesbourne station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. For an older house near a landmark such as Church of St Andrew, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Seaton is about 5 miles east of Canterbury, in Kent. Whether you are in the middle of Seaton or further out, we cover bathroom resealing for every kind of property. Seaton is one of 922 towns and villages in Kent we cover. There’s also a page for Chelmsford, about 44 miles away.
Every address in CT3 is covered for bathroom resealing, from the main roads to the quietest streets. Close by, we work in Wickhambreaux (1 mile west), Ickham (1 mile south-west), Bramling (1 mile south), Littlebourne (1 mile south-west) and Bekesbourne (3 miles south-west). Further out, we also cover Canterbury (5 miles west), Margate (11 miles north-east), Dover (11 miles south-east), Folkestone (14 miles south), Ramsgate (10 miles east) and Broadstairs (12 miles north-east).
What’s near Seaton
We work in homes and buildings around The Rose Inn. Seaton’s nearest station is Bekesbourne station, about 2.8 miles south-west of the centre. Nearby you’ll also find St Martins Hospital (3.6 miles west).
About our bathroom resealing in Seaton
A bead that has gone black, split or come away shouldn’t be left until there’s a leak. A photo of the joints helps when you call 0345 464 0079 or send us an email, and we will send you a clear quote for bathroom resealing in Seaton. We work on sinks & splashbacks, wet rooms and baths, and people most often call us about leaks into the floor or ceiling below and gaps between the worktop and the wall.
Somewhere as small as Seaton, homes tend to be cottages, farmhouses or converted buildings, with some newer houses too. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.
- Location
- Seaton (CT3)
- Wider area
- Kent
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
When it isn’t the sealant
We’d rather tell you now than do work that will not last, so here’s what sealant cannot put right:
- Movement from a bath with loose feet or no proper support
- Damage behind the tiles that needs a tiler
- Failed grout lines across the wall
If in doubt, phone 0345 464 0079 or send us an email and we’ll say what we think.
What we seal
- Sinks & splashbacks
- Shower trays & enclosures
- Basins & vanity units
- Baths
- Wet rooms
- Kitchen worktops & upstands
Your questions about bathroom resealing in Seaton
Will you come out to Seaton?
Yes. Seaton is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you work in hotels near Seaton?
Yes, we work for hotels as well as homes and businesses. Rooms can be done a few at a time, so the building stays open.
Where are you based?
We work from Crawley. We cover Seaton and the rest of Kent.
When can I use the bath or shower again?
We give you the cure time before we leave, and it’s normally around 24 hours. Using it sooner can damage the bead.
Is it OK to put new sealant on top of the old bead?
No, and it’s one of the main reasons reseals fail. The old joint is stripped, cleaned and resealed from scratch.
Will the old sealant be removed?
Yes, always, and completely. New sealant won’t bond properly to old, so the joint is cleaned back first.
Are you insured?
Yes, we are fully insured for domestic and commercial work.
Can I do it myself?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
Nearby places to Seaton
More services for Seaton
DIY versus a professional finish
If you’ve already had a go yourself, that’s fine. We cut it out and start again, so just mention it when you contact us.
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it peels away and traps moisture behind it. Everything old must be removed first.
What we are called out for in Seaton
Sealing over old silicone is one of the commonest mistakes we find. New silicone will not bond to old silicone, so it peels, leaks and hides mould behind it.
People normally contact us after spotting something like this:
- Gaps where the bath or tray has moved
- Gaps between the worktop and the wall
- A messy, uneven bead from a previous reseal
- Water escaping at the shower enclosure
For site and facilities teams at buildings such as Wickhambreaux Church of England Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Questions to ask before you book
- What happens if they find a problem under the old sealant
- Is the old sealant removed completely?
- Who turns up on the day
- Are they insured?
What the job involves on each surface
Basins & vanity units
Basin joints are short and close to eye level: the bead is right in front of you, so it’s tooled cleanly and evenly, in white, clear or a colour to suit.
Sinks & splashbacks
Splashbacks in glass, tile or acrylic meet the worktop in a long joint. We renew it in clear, white or a matched colour.
What happens on the day
You do not need to clear the whole room or building before we come, only the area right around the joints. We protect the rest, and the job takes a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen for a typical job. Somewhere as small as Seaton, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We look at every joint first and check for movement or leaks.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- The bead is tooled smooth and you’re told the cure time, normally around 24 hours.
Before we arrive
- Tell us about any previous sealing or DIY attempts
- Mention any leaks or damp you’ve noticed
- Let us know about stairs, lifts or work at height
Getting a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we’ll talk you through the work and give you a clear price.
Read more
Landlord and commercial work in Seaton
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
For anyone letting property in or around Seaton, jobs at different addresses can go on one quote. Send us the addresses and the work at each, and photos by email help.
How we quote for bathroom resealing
The quote reflects the job in front of us. We take into account:
- How many rooms, windows or areas are involved
- How much there is to do
- Whether old sealant or filler has to be cut out
- Any mould that needs treating
The cost reflects the work involved, not guesswork. That’s why we ask about the job first and agree the price before starting.
Asking for a quote
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- How many joints, rooms or windows are involved
- Access, such as stairs, a lift or height
- A few pictures by email, if you can
- Whether it’s a home or a business
For bathroom resealing in Seaton, ring 0345 464 0079 or send us an email. Tell us what the problem is and where, and you’ll get a clear quote before we start.