Greater London · England
Tulse Hill Bathroom Resealing
Bathroom resealing for Tulse Hill, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Leaking joints on a shower screen
- Shrunken sealant along the back of a worktop
- Water getting behind the bath panel
When something else is needed
In fairness, there are a few things sealant will not fix:
- Movement from a bath with loose feet or no proper support
- Damage behind the tiles that needs a tiler
- Water coming from the plumbing rather than the joint
If in doubt, ring 0345 464 0079 or send us an email and we will say what we think before you book.
Joints and surfaces we work on
- Sinks & splashbacks
- Kitchen worktops & upstands
- Shower trays & enclosures
- Wet rooms
- Basins & vanity units
- Baths
Bathroom resealing for homes and businesses in Tulse Hill
A shower joint gets soaked every day. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. Each gets a bead of anti-fungal sanitary silicone, tooled smooth so water runs off instead of sitting in a ridge. If you have a joint torn by a bath that flexes and a messy, uneven bead from a previous reseal, we can put it right, whatever the surface.
London homes include a lot of flats, conversions and mansion blocks, so a bathroom is often directly above a neighbour’s ceiling. In Tulse Hill, that’s a good reason to put tired sealant and grout right early.
The work is covered for a year after we finish. If there’s a problem with it, please ring 0345 464 0079 or drop us an email.
- Where
- Tulse Hill (SW2, SE24, SE27)
- Wider area
- Greater London
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
How the visit works
Most of a good job is in the preparation, and we do not rush it. Joints are cleaned back and dried before anything new goes in. In total, it usually takes a morning or an afternoon for most single baths and showers. Many London jobs are in flats, so we come ready for stairs, narrow hallways and shared entrances. If the building has a concierge, managing agent or access rules, tell us when you book.
- We look at every joint first and check for movement or leaks.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- The bead is tooled smooth and you’re told the cure time, normally around 24 hours.
How to prepare
- Mention any parking rules near the property
- Tell us about any previous sealing or DIY attempts
- For business premises, tell us about site rules or sign-in
Get a quote
We quote each job on its own, so the first step is telling us about yours. Just call 0345 464 0079 or drop us an email with the details.
Read more
How the job changes by surface
Shower trays & enclosures
The vertical joint where a screen profile meets the wall is a common leak point. It’s resealed along with the tray joints, sealing the side the enclosure’s instructions call for.
Baths
Baths move more than any other fitting, so we fill it with water before sealing. That way the joint is laid with the bath at its heaviest and isn’t stretched when it’s used.
What bathroom resealing looks like in Tulse Hill
London has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in. In a London flat, water from a failed bath or shower seal can reach the neighbours below, so tired sealant is best dealt with early.
As a London address, Tulse Hill can be tricky for parking: let us know about parking bays, permits or a driveway. For site and facilities teams at buildings such as St Martin-In-The-Fields High School for Girls, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Tulse Hill is about 1 mile north-east of Streatham, in Greater London. Tulse Hill gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Tulse Hill is one of 764 towns and villages in Greater London where we work for bathroom resealing.
All of SW2, SE24 and SE27 is covered for bathroom resealing. Streets in the area include Ostade Road, Medora Road and Palace Road, all of which we cover. Being close to the A204, Tulse Hill is simple for us to get to for bathroom resealing. We also cover Streatham Hill (1 mile south-west), Brixton (1 mile north-west), Clapham Park (1 mile north-west), Hyde farm estate (1 mile west) and Streatham (1 mile south-west). Within a short drive, we also cover London (4 miles north), City of Westminster (5 miles north), Marylebone (5 miles north), Kensington (6 miles north-west), St Pancras (6 miles north) and Shoreditch (6 miles north).
Around Tulse Hill
Typical jobs here are in homes near Fenstanton Primary School, The Commercial pub and Tulse Hill School, among other places. There’s a railway station in Tulse Hill itself: Tulse Hill station. A little further out are Clockworks Museum (0.9 miles south) and Southside Wandsworth (3.7 miles west). Not far away are Knight's Hill and Battersea Park Lake.
Towns and villages near Tulse Hill
Also in Tulse Hill
Why act early in Tulse Hill
You don’t need a new bathroom because the sealant looks bad. Replacing the joint is normally all it takes, as long as the fittings themselves are sound. If we find a deeper problem, you’ll hear it from us. Converted houses in London often have a bathroom above someone else’s living room, so a small leak from tired sealant can mean a neighbour’s ceiling and a lot of disruption. Putting it right early is much less trouble for homes in Tulse Hill.
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all make a difference, and we’ll explain the quote if you ask.
Why Tulse Hill clients choose us
- Full insurance on every job
- White, clear, grey or coloured to suit, where the product allows
- 180+ five-star Google reviews
- Quality sealants from Arbo and Everbuild
Take a look at what affects the cost or customer reviews.
Can I do it myself?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
Quotes for bathroom resealing in Tulse Hill
Some jobs are bigger than they look, and some smaller. What affects the quote:
- Whether there’s mould to deal with
- Access and height
- Which sealant suits the joint
- How many areas need sealing
Doing several joints on one visit normally makes better use of the time than several visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.
What we need to know
A few details help us give you an accurate quote. When you get in contact, it helps to mention:
- Photos by email, if that’s easy
- Where the property is
- If someone has resealed it before
- Access, such as stairs, a lift or height
Getting a quote is simple: let us know the job and the location. A few pictures by email make the job easier to understand.
When to call us in Tulse Hill
The wrong product fails fast. Decorators’ caulk and all-purpose sealants aren’t made for constant wetting, so they crack, discolour or grow mould quickly. Wet areas call for a sanitary silicone with an anti-fungal additive.
It’s worth asking for a quote if you see:
- Mouldy sealant that has gone black
- Leaking joints on a shower screen
- Splits where the tray meets the wall
- Sealant that has split, shrunk or peeled away
For an older house near a landmark such as Holy Trinity Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Comparing quotes
- How the joint is cleaned and prepared
- Is the old sealant removed completely?
- The length of the guarantee
- How the colour is chosen
Tulse Hill: your questions answered
Could a tired shower seal in my Tulse Hill flat affect the neighbours below?
It can, yes: water that gets past a split bead or cracked grout often runs under the tray and shows on the ceiling below. Replacing the sealant and grout before that happens is much less trouble than repairing a neighbour’s ceiling.
I let a flat near Tulse Hill station. Can you help?
Yes, landlords and agents are among the people we work for. You can ring 0345 464 0079 or email us with the details for a clear quote.
What sealant do you use?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference, and we’ll tell you what we are using.
Are you insured?
Yes. Mr Mastic is fully insured, and we’ve been doing sealant work for more than 20 years.
How long does the new silicone need before I use the shower?
Around 24 hours is typical, and we confirm the time for the product used. Using it sooner can damage the bead.
What should I tell you?
A short description and the location, with photos by email if possible. If we need more, we will ask.
How much does bathroom resealing cost in Tulse Hill?
There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.
Will you leave a mess?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.