Greater London · England

Loughborough Junction Bathroom Resealing

Our applicators work in Loughborough Junction on bath, shower, basin, wet room, worktop and sink resealing. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.

  • A messy, uneven bead from a previous reseal
  • Splits where the tray meets the wall
  • New sealant laid over old sealant that is now lifting

Bathroom resealing near Loughborough Junction

How we quote for bathroom resealing

We do not publish a price list. The quote depends on:

  • Whether old sealant or filler has to be cut out
  • When we can work, for business premises
  • The number of rooms or windows
  • How easy the joints are to reach

A failed joint rarely gets cheaper to fix by waiting. If you’re not sure whether it needs doing, ring 0345 464 0079 or email us and we’ll give you an honest view and a quote.

Helping us quote

When you call or email, it’s useful to know:

  • A few pictures by email, if you can
  • What the problem is, such as mould, gaps, leaks or cracking
  • The address or postcode of the job
  • The rough size of the job

The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.

Bathroom resealing in Loughborough Junction, done properly

Homes in Loughborough Junction have the same weak spots as anywhere else: the long edge of the bath, the base of the shower tray, the back of the basin and the line along the worktop. Each one is stripped, cleaned and dried before new silicone goes in. We work on sinks & splashbacks, wet rooms and shower trays & enclosures, and the jobs we see most are a reseal done over the top of the old bead and leaks into the floor or ceiling below.

Across London, a large share of homes are flats, conversions or mansion blocks, and many bathrooms sit right above someone else’s ceiling. In Loughborough Junction, that is a good reason to put tired sealant and grout right early.

We stand behind the work with a one-year guarantee, so you are not left on your own once the job is done.

Close-up of hands using a sealant gun on the joint between a glass shower screen and tiles
Location
Loughborough Junction (SW9, SE5, SE24)
Region
Greater London
Guarantee
One year on every job
Price
Quoted before any work starts
Call
0345 464 0079
Last updated
26 October 2026

Landlord and commercial work in Loughborough Junction

We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.

Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.

The process

The work is kept neat and contained to the joints we’re treating, so you can carry on as normal. The job generally takes half a day or less for one room, longer when the kitchen is included. In Loughborough Junction, as in most of London, parking needs a little planning. It helps if you can point us to a visitor permit or a bay close to the door.

  1. We start by protecting the area and stripping out the old bead.
  2. The joint is cleaned, degreased and treated for mould.
  3. The joint is left to dry, and baths are filled with water first.
  4. A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
  5. Finally we tidy up and explain the cure time before we leave.

How to prepare

  • Let us know if you’ve seen damp or leaks
  • Mention any parking rules near the property
  • Where the joints are inside, avoid wetting them before we arrive

How to get a quote

Need a quote? Please phone 0345 464 0079 or send us an email with a few details. You’ll know what we plan to do, and what it will cost, before any work begins.

Get a quick quote

Read more

How the job changes by surface

Baths

Acrylic baths flex the most, while steel and cast iron baths move less but still settle when full. Filling the bath first allows for that movement.

Basins & vanity units

Vanity units have long, worktop-style joints against the wall. Water that gets behind can damage the unit, so a neat, continuous bead matters.

Loughborough Junction: your questions answered

Could a tired shower seal in my Loughborough Junction flat affect the neighbours below?

Yes. In a flat, water from a failed bath or shower seal has only one way to go, and that’s down. A proper reseal before the leak starts is the easy fix.

Can you help a landlord with a rental near Loughborough Junction station?

Yes. We work for landlords and agents as well as homeowners. You can call 0345 464 0079 or email us with the details for a clear quote.

Do you work for hotels and businesses?

Yes. Larger jobs can be planned room by room or area by area.

Are you fully insured?

Yes. We are fully insured, and we can confirm the details when we quote.

Is it OK to put new sealant on top of the old bead?

No. Sealing over the top looks fine for a few weeks, then lifts, because silicone does not bond to silicone. Every trace of the old bead is removed first.

Does the resealing come with a guarantee?

Yes. Our 12-month guarantee covers every job, and we are fully insured.

Do the sealants smell?

Sometimes, a little. Any smell clears as the sealant cures.

Do you take out the old sealant first?

Yes. We cut out all the old sealant and clean the joint.

How to look after the new joints

Looking after new joints is easy, and it makes a real difference:

  • Open a window or run the fan so the room dries
  • Avoid abrasive pads on the sealant
  • Check the joints every few months for splits or lifting
  • Wait for the cure time we give you

Mould needs damp, so keep the room aired. Use the fan, or open a window, while you bathe and for a while afterwards, so the silicone gets a chance to dry.

Each shower pushes a little more water through a failed joint. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Resealing early stops it.

DIY sealant or a professional job?

A DIY attempt does not rule out a professional job. We cut it out and start again.

If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.

Why it’s worth doing now in Loughborough Junction

Most of the work in a good reseal happens before any silicone goes on: removing all the old sealant, degreasing the joint, treating mould and drying it properly. Without that preparation, the new bead won’t last. In older London homes, water behind a failed joint soaks into brick and timber without much sign, and once it shows in Loughborough Junction, the repair is bigger than a sealant job.

Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.

Why us?

  • Tidy, careful work
  • Old sealant always removed completely
  • Domestic, commercial and hotel work
  • Quality sealants from Arbo and Everbuild

Take a look at how sealant jobs are priced and what customers say.

Bathroom resealing in Loughborough Junction: local notes

Loughborough Junction has hotels and guest accommodation nearby. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room. London’s water is hard, which leaves limescale on sealant, grout and taps, and it has to be cleaned off before new sealant goes in.

If you let a flat or house near Loughborough Junction station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. As a London address, Loughborough Junction can be tricky for parking: let us know about parking bays, permits or a driveway. For site and facilities teams at buildings such as St Saviour's Church of England Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.

Loughborough Junction is about 1 mile east of Stockwell, in Greater London. Homes, rented property, offices and hotels in Loughborough Junction can book us for bathroom resealing, old or new, large or small. Every job comes with our 12-month guarantee. Loughborough Junction is one of 764 places in Greater London where we work for bathroom resealing.

Work in SW9, SE5 and SE24 is quoted and booked the same way as anywhere else. You’ll find streets such as Minet Road, Heron Road and Lowth Road, and we cover them all. If you are just outside Loughborough Junction, we cover Angell Town (1 mile north-west), North Brixton (1 mile north-west), Stockwell (1 mile west), Brixton (1 mile south-west) and Little Portugal (1 mile north-west). Larger places within reach include City of Westminster (4 miles north-west), Marylebone (4 miles north-west), Kensington (5 miles north-west), St Pancras (4 miles north), Shoreditch (4 miles north) and Walthamstow (9 miles north).

Around Loughborough Junction

Typical jobs here are in homes near The Michael Tippett School, Max Roach Park and The Hospital and Home Tuition Sick Children's Service. There’s a railway station in Loughborough Junction itself: Loughborough Junction station. Nearby you will also find Gabriel's Wharf (2.9 miles north) and London General Cab Company Museum (0.6 miles north-west). For a walk, there’s Battersea Park Lake and Centre for Wildlife Gardening.

Map of Loughborough Junction © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job