Greater London · England
Loughborough Junction Remedial Sealant
We cover Loughborough Junction for removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Movement joints that have split or pulled away
- A second bead peeling off the first
- Products that weren’t meant for the joint
Remedial sealant for Loughborough Junction homes and businesses
How we handle remedial sealant in Loughborough Junction
A movement joint stops working when its sealant splits or sets hard. We cut out the failed sealant and set the depth with backing, before resealing with a flexible product suited to the movement. We work on expansion joints, botched or over-sealed joints and failed movement joints, and the jobs we see most are worktop sealant that has shrunk and split and beads that never stuck properly.
Much of London’s older housing is Victorian and Edwardian terraces, many of them now split into flats, and bathrooms were often squeezed into small rooms. A compact bathroom that steams up every day is hard on silicone and grout.
You are covered for a year from the day we finish. If there’s a problem with it, please phone 0345 464 0079 or send us an email.
- Where
- Loughborough Junction (SW9, SE5, SE24)
- Region
- Greater London
- Guarantee
- One year on every job
- Quote
- A clear price before work begins
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
What affects the quote in Loughborough Junction
Some jobs are bigger than they look, and some smaller. What affects the quote:
- The amount of work
- The number of rooms or windows
- Mould in or behind the old joints
- Whether the work is at height
Combining jobs into one visit is normally more efficient than separate visits, so tell us about everything that needs sealing. We’ll give you a clear quote for the lot.
Asking for a quote
What to tell us when you ask for a quote:
- Whether it has been sealed before
- What the problem is, such as mould, gaps, leaks or cracking
- Access, such as stairs, a lift or height
- Roughly how big the job is
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and add photos by email if you can.
FAQs for Loughborough Junction
Do you work for landlords with property near Loughborough Junction station?
Yes, rental work is part of what we do. You can call 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before we start.
Could a tired shower seal in my Loughborough Junction flat affect the neighbours below?
Yes, it can. Water that gets past failed sealant or cracked grout can run under the bath or tray and show up on the ceiling below. Replacing the sealant and grout before that happens is much less trouble than repairing a neighbour’s ceiling.
How long does the work take?
That depends on how many layers there are and how many joints. You will have a timescale before any work begins.
Where do you work from?
We work from Crawley. Our applicators cover Loughborough Junction.
Can you quote for more than one area?
Yes, and it often makes sense. Doing several areas at once is normally more efficient, so mention them when you ask for a quote.
Do the sealants smell?
Possibly a little. It fades as the sealant cures, and ventilation helps.
What should I tell you?
Where the job is, what the problem is and roughly how big it is. If you can, email a few pictures.
Will you leave a mess?
Tidy work is part of the job. We protect what’s around the joints.
The process
Good joint work is mostly preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. In total, it normally takes a few hours for a typical bath or shower, longer where several layers have been applied. In a London area like Loughborough Junction, the main things to plan are parking and access: let us know about parking, the floor we will be working on and any lift or shared entrance.
- Surrounding tiles, trays and frames are protected first.
- Every layer of failed sealant is stripped out.
- We clean and degrease the joint and look for signs of movement or water.
- Once dry, a suitable sealant is applied and tooled.
- You get the cure time and our view on why the joint failed.
Before we arrive
- Mention any sign-in or site rules at work premises
- Tell us about any water getting in
- Let us know about earlier repairs to the joints
Getting a quote
Getting a quote is simple: let us know the job and the location and its rough size. Photos by email help us understand the job.
Read more
How the job changes by surface
Over-sealed & botched joints
Botched joints sometimes have damaged edges from earlier scraping. We work carefully to avoid adding to it, and point out any existing damage.
Movement & expansion joints
Bonding on three sides is a common reason movement joints tear. Backing rod or bond-breaker tape prevents it, so the sealant grips the two sides only.
Nearby places to Loughborough Junction
What else we do in Loughborough Junction
What remedial sealant looks like in Loughborough Junction
London has a lot of flats and conversions, and a failed shower or bath seal in one can show up on the ceiling below, so tired sealant is best dealt with early. Loughborough Junction has hotels and guest accommodation nearby. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
Schools such as St Saviour's Church of England Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes. Homes close to St Matthew's Camberwell include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.
Loughborough Junction is about 1 mile east of Stockwell, in Greater London. Whether you’re in the middle of Loughborough Junction or further out, we cover remedial sealant for every kind of property. Our Greater London coverage runs to 764 places, Loughborough Junction among them.
Work in SW9, SE5 and SE24 works the same way as everywhere else we cover. You will find streets such as Minet Road, Heron Road and Lowth Road, all of which we cover. Neighbouring places we cover for remedial sealant include Angell Town (1 mile north-west), North Brixton (1 mile north-west), Stockwell (1 mile west), Brixton (1 mile south-west) and Little Portugal (1 mile north-west). Further out, we also cover City of Westminster (4 miles north-west), Marylebone (4 miles north-west), Kensington (5 miles north-west), St Pancras (4 miles north), Shoreditch (4 miles north) and Walthamstow (9 miles north).
Landmarks near Loughborough Junction
Around Loughborough Junction, our work takes us to homes and buildings near The Michael Tippett School, Max Roach Park and The Hospital and Home Tuition Sick Children's Service, among other places. Loughborough Junction has its own railway station: Loughborough Junction station. Other landmarks nearby include Gabriel's Wharf (2.9 miles north) and London General Cab Company Museum (0.6 miles north-west). Not far away are Battersea Park Lake and Centre for Wildlife Gardening.
Common problems we fix in Loughborough Junction
Joints that move need sealant that can stretch. A bath that flexes, a tray that rocks or a building joint that opens and closes will split a rigid or thin bead.
It’s worth asking for a quote if you see:
- A second bead peeling off the first
- Products that weren’t meant for the joint
- Thick, messy sealant smeared over tiles
- Repeat leaks from the same joint
For landlords with property near Loughborough Junction station, botched sealant from a previous quick fix is easier to strip out between tenants.
What your quote should include
- Is VAT in the price?
- Who turns up on the day
- What happens if the job turns out different
- What product goes in the joint
Aftercare tips
After the cure time, these simple habits help:
- Do not wait for a small gap to become a leak
- Report a tray that rocks or a worktop that lifts
- Never seal over old silicone
- Never fill a movement joint with mortar or grout
Ventilation keeps mould away from the new bead: use the extractor or open a window after showering.
Movement joints that have split let water into the structure, and the longer it’s left, the more the joint edges break down. Resealing while the edges are sound is simpler.
What we cannot put right
In fairness, some problems need a different trade:
- Movement from fittings that are not supported
- Tiles that have come away from the wall
- Leaks from a shower valve, waste or pipework (a plumber’s job)
If in doubt, ring 0345 464 0079 or email us and we will say what we think before booking.
Surfaces we seal
- Botched or over-sealed joints
- Shrunken worktop sealant
- Leaking tray & enclosure joints
- Expansion joints
- Mouldy bath & shower sealant
- Failed movement joints
DIY versus a professional finish
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.