Greater London · England
Brixton Bathroom Resealing
Bath, shower, basin, wet room, worktop and sink resealing for householders, landlords and businesses in Brixton. Fully insured, ARBOMaster approved and guaranteed for a year.
- Water getting behind the kitchen upstand
- New sealant laid over old sealant that is now lifting
- Black spots spreading through the bead
Bathroom resealing around Brixton
London’s water is hard, so limescale builds up on sealant, grout and fittings. In a London flat, water from a failed bath or shower seal can reach the neighbours below, which is why it’s worth fixing early.
For an older house near a landmark such as Trinity Congregational Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them. Schools such as Sudbourne Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes. If you let a flat or house near Brixton station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Brixton is about 1 mile south of Stockwell, in Greater London. Wherever you are in the SW2 postcode area, we cover bathroom resealing for homes and businesses. Brixton is one of 764 towns and villages in Greater London where we work for bathroom resealing.
We cover every part of the SW2, SW9 and SW4 postcode area for bathroom resealing. Local streets include Acre Lane, Jelf Road and Trent Road, all of which we cover. Brixton sits on or near the A204 and A2217, which makes travel easy. Nearby, we also carry out bathroom resealing in Stockwell (1 mile north), Clapham Park (1 mile west), Angell Town (1 mile north), Loughborough Junction (1 mile north-east) and Tulse Hill (1 mile south-east). Further out, we also cover London (3 miles north), City of Westminster (4 miles north), Marylebone (4 miles north), Kensington (5 miles north-west), St Pancras (5 miles north) and Shoreditch (5 miles north).
Local landmarks in Brixton
Typical jobs here are in homes near Trinity Arms, Max Roach Park and Trinity Academy, among other places. Brixton has its own railway station: Brixton station. Well-known places in the area include London General Cab Company Museum (0.9 miles north) and Baynard's Castle (3.8 miles north). Green spaces nearby include Battersea Park Lake and Centre for Wildlife Gardening.
Bathroom resealing in Brixton, done properly
It is not only bathrooms. Worktop upstands, sink edges and splashback joints all take splashes every day, and water behind a laminate worktop can make it swell. We reseal them with a kitchen-suitable silicone, matched to the worktop where it’s on show. If you have lumpy, uneven sealant from a DIY attempt and leaking joints on a shower screen, we can help, whatever the surface.
Much of London’s older housing is Victorian and Edwardian terraces, many of them now split into flats, and bathrooms were often squeezed into small rooms. A compact bathroom that steams up every day is hard on silicone and grout, and homes in Brixton are no different.
The work is covered for a year after we finish. If anything is not right with it, phone 0345 464 0079 or drop us an email.
- Where
- Brixton (SW2, SW9, SW4)
- Region
- Greater London
- Guarantee
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Leave it or put it right?
Tired sealant is not a reason to replace a bath or shower. A new bead often brings the whole room back, provided the bath, tray and tiles are in good order. If something else is wrong, we’ll tell you. In a London flat, a failed joint rarely stays your problem alone: water from a shower or window joint can reach the flat below, and gaps in fire-stopping matter to everyone in the building.
Leaving a failed joint generally makes the job bigger, not smaller. If you’re unsure, call 0345 464 0079 or email us and we will give you an honest view and a quote.
What you get with us
- Domestic, commercial and hotel work
- 180+ five-star Google reviews
- An ARBOMaster approved applicator
- More than 20 years in sealant work
Read how sealant jobs are priced and our reviews.
Honest limits
We’d rather tell you now than do work that will not last, so these are the limits:
- Loose or hollow tiles, or failed tanking behind them
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Water getting in through the grout rather than the sealant
Not sure which it is? You can phone 0345 464 0079 or email us and we’ll tell you honestly before booking.
Where we work in Brixton
- Wet rooms
- Basins & vanity units
- Shower trays & enclosures
- Sinks & splashbacks
- Baths
- Kitchen worktops & upstands
Places near Brixton
Other services in Brixton
Can I do it myself?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
Landlords, agents and businesses in Brixton
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. We can quote for more than one property at once.
How to look after the new joints
After the cure time, these simple habits help:
- Run the extractor fan during and after every shower
- Keep an eye on the corners, where splits start
- Dry the bead with a towel now and then
- Never pick at the silicone with a blade
Give the silicone time to cure before it gets wet, following the cure time we give you. After that, a quick wipe after showering helps keep it clean.
A split bead lets water through every time the bath or shower is used. Over time that water reaches floors, walls and ceilings. Resealing early stops it.
How we quote for bathroom resealing
Some jobs are bigger than they look, and some smaller. The main factors:
- The number of rooms or windows
- Whether old sealant or filler has to be cut out
- Whether the work is at height
- Mould in or behind the old joints
What it costs depends on the amount of work, how hard the old material is to remove and access to the work. You’ll have a clear quote before any work starts, so you know where you stand.
Asking for a quote
The more you tell us, the more accurate the quote. When you get in contact, it helps to mention:
- Pictures of the joints, sent by email
- What the problem is, such as mould, gaps, leaks or cracking
- The rough size of the job
- Access, such as stairs, a lift or height
To get a quote, ring 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. We will give you a clear price before any work starts.
Common questions in Brixton
Is parking a problem for a job in Brixton?
In much of London, parking needs planning: a visitor permit or a nearby bay makes the day run more smoothly.
Do you work for hotels and guest houses in Brixton?
Yes, hotels and guest houses are among the places we work. Rooms can be done a few at a time, so the building stays open.
Is white the only colour available?
White, clear and a range of colours are available. On a worktop we colour-match where the joint shows.
Can I add another job to the visit?
Yes. Just list everything you need and we’ll quote it together.
How long does the new silicone need before I use the shower?
The surface skins over fairly quickly, but the bead needs longer to cure right through. Leave it around 24 hours before it gets wet, or follow the cure time we give you.
Is it OK to put new sealant on top of the old bead?
No, never. Sealing over the top looks fine for a few weeks, then lifts, because silicone does not bond to silicone. Every trace of the old bead is removed first.
Which products do you use?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice.
Do you hold any approvals?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
How it works
The work is kept neat and contained to the area we are working on, so you can get on with your day. Expect the work to take around two hours for one bath or shower, longer for a whole bathroom. In Brixton, flats, stairs and shared entrances are part of the routine. Mention any building rules, key holders or managing agents when you book.
- We protect the area and cut out all of the old sealant, including the film left on the tiles.
- The joint is cleaned, degreased and treated for mould.
- We let it dry fully and fill the bath with water before sealing.
- A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
- We clear away and tell you when it can get wet, generally after around 24 hours.
Preparing for the visit
- Mention any sign-in or site rules at work premises
- Let us know if you’ve seen damp or leaks
- Tell us about access, such as stairs, a lift or high-level joints
Get a quote
There’s no standard price list. Instead, we send you a clear quote for your job. To get started, phone 0345 464 0079 or send us an email.