Scottish Borders · Scotland
Bathroom Resealing in Stirches
Bath, shower, basin, wet room, worktop and sink resealing for householders, landlords and businesses in Stirches. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Splits where the tray meets the wall
- Cracked, shrunken or lifting silicone
- A messy, uneven bead from a previous reseal
Why act early in Stirches
Most of the work in a good reseal happens before any silicone goes on: removing all the old sealant, degreasing the joint, treating mould and drying it properly. Without that preparation, the new bead won’t last. Around Stirches, water from a failed joint in an older stone home can soak into timber and plaster.
What you pay reflects the work, not a rough estimate. That’s why we ask a few questions first and give you a clear price before we start.
Why Stirches clients choose us
- Homes, businesses and hotels
- 180+ five-star Google reviews
- Anti-fungal silicone where joints get wet
- Colour agreed with you before work begins
How we handle bathroom resealing in Stirches
A fresh bead of silicone changes how a bathroom looks more than most people expect. Mouldy silicone makes even a new bathroom look neglected, and a clean white or clear joint fixes it quickly. It also seals the gaps that let water behind the bath. Common call-outs are for gaps where the bath or tray has moved and a bead that has pulled away from the tiles, on sinks & splashbacks, wet rooms and baths.
A bathroom in a place like Stirches gets the same daily wear as one in a city flat. Limescale is less of a problem with Scotland’s generally soft water, but mould still takes hold in damp sealant and grout.
You’re covered for a year from the day we finish. If anything isn’t right with it, send an email to info@mrmastic.co.uk.
- Where
- Stirches (TD9)
- Wider area
- Scottish Borders
- Cover
- 12 months on all our work
- Quotes
- A clear price before work begins
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Other services in Stirches
How the visit works
At the end, we look at the finished work together and tell you how long to leave it. The work normally takes around two hours for one bath or shower, longer for a whole bathroom, depending on the size of the job. Outdoor work around Stirches depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Work indoors is not affected.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Before we arrive
- Plan for the work area to be out of bounds to pets and children
- On commercial sites, let us know about site rules
- Move anything stored near the joints
Get a quote
Quotes start with a quick conversation. Describe the problem, the location and the size of the job. Whenever you are ready, drop us a line at info@mrmastic.co.uk.
Related advice
Quotes for bathroom resealing in Stirches
We quote each job individually. This is what makes a difference:
- How many rooms, windows or areas are involved
- Whether there’s mould to deal with
- How easy the joints are to reach
- The old material and how stubborn it is
There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please send an email to info@mrmastic.co.uk.
Asking for a quote
You do not need to know the technical terms. It helps if you can tell us:
- What the problem is, such as mould, gaps, leaks or cracking
- Whether it’s a home or a business
- A few photos by email, if you can
- Whether it has been sealed before
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we will explain what’s involved and send you a clear quote.
Bathrooms and kitchens in Stirches
Private landlords in Scotland must be registered and meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Failed sealant around a bath or shower is worth sorting between tenancies. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
If you look after a building such as Hawick High School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Stirches is about 1 mile north-west of Hawick, in the Scottish Borders. We carry out bathroom resealing for homeowners, landlords and businesses in Stirches, as part of our work across the Scottish Borders. Stirches is one of 89 places in the Scottish Borders we cover for bathroom resealing. You can also see our page for Edinburgh, roughly 39 miles from Stirches.
All of TD9 is within our area for bathroom resealing, from the main roads to the quietest streets. Whether your property is on Bowden Road, Stirches Road and Atkinson Road or a nearby road, our applicators can take on the job. We also cover the places around Stirches: Wilton (1 mile south), Hawick (1 mile south-east), Wilton Dean (1 mile south-west), Burnfoot (1 mile east) and Woll (4 miles north-west). Larger places within reach include Galashiels (12 miles north), Selkirk (8 miles north), Jedburgh (10 miles east), Melrose (12 miles north), Earlston (15 miles north) and Langlee (12 miles north).
Around Stirches
We work in homes and buildings around The Bourtree pub, among other places. Other landmarks nearby include Borders Textile Towerhouse (0.9 miles south) and Hawick Community Hospital (0.7 miles south). Not far away are Ashkirk Hill and Ashkirk Loch.
DIY sealant or a professional job?
If you’ve already had a go yourself, that’s fine. We remove it and do the joint properly, so tell us about it when you ask for a quote.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
How to look after the new joints
How long the joints last depends on use and care. Here’s what we suggest:
- Move toiletries away from the joint
- Keep the fan on for a while after bathing
- Clean with a mild bathroom cleaner and a soft cloth
- Dry the bead with a towel now and then
Good ventilation does more than any cleaner. Run the extractor fan during and after a shower, so the bead dries out between uses.
There’s no need to wait for a full refurbishment. Sealant is a maintenance item, like the paint on a window frame, and renewing it as soon as it fails protects everything around it.
Questions from Stirches
Is Stirches within the area you cover?
Yes, Stirches is covered. We work across all of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Can you do bathroom resealing in Stirches?
Yes, Stirches is within the area we cover. We work across all of Scotland. Just send an email to info@mrmastic.co.uk with a few details of the job.
How much does bathroom resealing cost in Stirches?
We do not publish prices, because the cost depends on the job: its size, the old material, access and the product needed. You will get a clear quote before work begins.
Can I choose the colour of the sealant?
You’re not limited to white: clear, white and colours chosen to suit the room. We can help you pick when we quote.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
What do you put in the joint?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference.
Do I have to be there?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
Honest limits
We’d rather tell you now than do work that won’t last, so here’s what sealant cannot put right:
- A tray or bath that is cracked through
- Tiles that have come away from the wall
- A bath or tray that moves because it isn’t properly supported
If in doubt, email us at info@mrmastic.co.uk and we will say what we think.
Surfaces we seal
- Shower trays & enclosures
- Sinks & splashbacks
- Kitchen worktops & upstands
- Basins & vanity units
- Wet rooms
- Baths
When to call us in Stirches
Sealant laid on a damp, dusty or greasy joint never bonds properly. Soap residue, oils and leftover silicone film all get in the way, so a rushed job can start to lift early.
Any of these means the joints need attention:
- Smears of silicone across the tiles
- Leaking joints on a shower screen
- Damp behind the bath or under the tray
- Black spots spreading through the bead
In the older streets around Wilton Parish Church, walls and floors in older homes can move, and sealant and grout show it first.
Comparing quotes
- What product goes in the joint
- Is the old sealant removed completely?
- Whether they’re fully insured
- How much experience the applicator has