Scottish Borders · Scotland
Galashiels Bathroom Resealing
Bathroom resealing in Galashiels from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Damp behind the bath or under the tray
- A messy, uneven bead from a previous reseal
- Gaps between the worktop and the wall
Honest limits
In fairness, some problems need a different trade:
- Cracks in the tray itself rather than the joint
- Failed grout lines across the wall
- Movement from a bath with loose feet or no proper support
Not sure which it is? You can send an email to info@mrmastic.co.uk and we will tell you honestly before booking.
Where we work in Galashiels
- Shower trays & enclosures
- Sinks & splashbacks
- Wet rooms
- Baths
- Kitchen worktops & upstands
- Basins & vanity units
How we handle bathroom resealing in Galashiels
The secret of a lasting bead is the preparation. The old sealant is removed to the last smear, then the joint is cleaned, degreased and treated for mould. Only once it’s dry does the new bead go on. Typical jobs include a bead that has pulled away from the tiles and leaking joints on a shower screen, across wet rooms, shower trays & enclosures and baths.
With generally soft Scottish Water supplies, limescale is less of an issue in Galashiels than in hard-water areas. Mould is a different story: a steamy bathroom still turns sealant and grout black.
A one-year guarantee comes as standard, so you’re not left on your own once the job is done.
- Where
- Galashiels (TD1)
- Wider area
- Scottish Borders
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Bathroom resealing around Galashiels
Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. Mould is another matter: a bathroom that stays damp still turns sealant and grout black. Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies.
Managing a site like Galashiels Academy? Then we reseal washrooms and kitchens in schools and businesses as well as homes.
Galashiels is about 28 miles south-east of Edinburgh, in the Scottish Borders. Galashiels gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. 89 places in the Scottish Borders are on our list, from the larger towns to small villages. Edinburgh is on our list too, around 28 miles away.
Every address in TD1 is covered for bathroom resealing, from the main roads to the quietest streets. Whether your property is on Market Street, High Street and Paton Street or anywhere close by, our applicators can take on the job. Being close to the A7 and A72, Galashiels is simple for us to get to. If you’re just outside Galashiels, we cover Langlee (1 mile east), Boleside (2 miles south), Tweedbank (2 miles south-east), Darnick (3 miles east) and Clovenfords (3 miles west). Further out, we also cover Hawick (13 miles south), Peebles (15 miles west), Kelso (15 miles east), Selkirk (5 miles south), Jedburgh (14 miles south-east) and Wilton (13 miles south). Galashiels is among the bigger towns we cover in the Scottish Borders.
Around Galashiels
Typical jobs here are in homes near Public House, among other places. There’s a railway station in Galashiels itself: Galashiels station. Other landmarks nearby include Borders General Hospital (2.7 miles south-east) and Castle Holydean (4.4 miles south-east). The countryside around Galashiels includes Eildon Mid Hill.
Galashiels questions
Can you do bathroom resealing in Galashiels?
Yes, Galashiels is within the area we cover. We work across all of Scotland. Just drop us a line at info@mrmastic.co.uk with a few details of the job.
Is bathroom resealing in Galashiels guaranteed?
Every job comes with our one-year guarantee, wherever it is. We are also fully insured and ARBOMaster approved.
Do you work for landlords and businesses?
Yes, regularly. Several properties can be quoted together.
Can you get rid of the black mould in my sealant?
Yes. Mould inside the bead rarely cleans out for good, so the bead comes out, the joint is treated and new anti-fungal silicone goes in.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Which products do you use?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
Are you insured?
Yes. Full insurance covers our work.
What does bathroom resealing cost?
Every job is different, so each one gets its own quote. For a quick quote, email us at info@mrmastic.co.uk and let us know what needs doing and where.
Keeping the joints in good condition
Good habits help new joints last longer. A few tips:
- Squeegee the walls and tray after use
- Do not leave water standing on kitchen joints
- Look for lifting corners and small gaps now and then
- Open a window or run the fan so the room dries
Treat the new bead gently when you clean: warm soapy water and a soft cloth do the job. Scourers and blades can nick the surface, because a damaged bead gives mould a foothold.
A split bead lets water through every time the bath or shower is used. Over time that water reaches floors, walls and ceilings. Early resealing closes the gap before damage is done.
Should I try it myself first?
If you’ve already had a go yourself, that is fine. We cut it out and start again, so just mention it when you contact us.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
What we do, step by step
When we arrive, we look over the joints with you first, so there are no surprises. We protect the surfaces around the joints before work begins. The work usually takes a couple of hours for a single bath or shower. Parking around Galashiels is rarely difficult, though older streets in the centre can be tight. If you are in a flat with a shared stair or a door entry system, let us know when you book.
- First, each joint is checked for movement and signs of water.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- The bead is tooled smooth and you’re told the cure time, generally around 24 hours.
Before we arrive
- Let us know about parking restrictions
- Let us know if you’ve seen damp or leaks
- Mention any tricky access
How to get a quote
Every job is quoted individually. Simply send an email to info@mrmastic.co.uk and describe the job and send photos if you have them.
Advice
Why act early in Galashiels
Most of the work in a good reseal happens before any silicone goes on: cutting out every trace of the old bead, cleaning, treating mould and letting the joint dry. Skip those steps and even the best silicone fails early. Private landlords in a town like Galashiels must keep homes wind and watertight under the Repairing Standard. Replacing failed sealant early is simpler than dealing with a complaint.
Doing several joints on one visit is usually more efficient than separate visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.
Why Galashiels customers choose us
- 180+ five-star Google reviews
- White, clear, grey or another colour, product permitting
- More than 20 years in sealant work
- You choose the colour before work begins
Take a look at how sealant jobs are priced or customer reviews.
Towns and villages near Galashiels
Other services in Galashiels
Common problems we fix in Galashiels
The wrong product fails fast. Acrylic caulk and general-purpose sealants are not designed for a joint that is wet every day, so they stain, crack or go mouldy before long. Wet areas call for a sanitary silicone with an anti-fungal additive.
The most common problems we see are:
- Water getting behind the bath panel
- Leaking joints on a shower screen
- New sealant laid over old sealant that is now lifting
- Smears of silicone across the tiles
For landlords with property near Galashiels station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
What your quote should include
- How much experience the applicator has
- What preparation is included
- What insurance they hold
- Whether you can choose the colour
How the job changes by surface
Baths
Acrylic baths give a little under load, while steel and cast iron baths move less but still settle when full. Loading the bath with water before sealing allows for it.
Shower trays & enclosures
A tray that rocks will split any sealant. Movement is checked before anything is resealed, and if the tray needs refixing, we will say so.